Reviews
SUBFRAME Kit TYPE-2 Stupendo
As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures ------------- --------------------------------------------- As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures Powered by Google Translator View detail
DIY is not easy, but it's a great product
This product does not impair the aesthetics of the bike and enhances the rigidity of the vehicle body. Mounting is difficult on your own, I recommend going to the maintenance shop. The shimmering of chrome makes the bike very stand out. If you wear this, your bike gets a different look than others. View detail
Cost performance ◎
We chose the over-made model because we wanted to coordinate it with the sub-frames.
The installation was done by Shop.
Material:Polishing was selected, and the connection with the sub-frame is now shiningly gorgeous.
Custom feeling is up, I am satisfied.
View detail
Parenthesis good!
I installed it and I am satisfied with its appearance and Parenthesis.
However, the Change Pedal and the sub-frame interfere with each other because the engine is set to 125cc, and it seems that some ingenuity is required for installation.
View detail
Jack-up required
When you look down while straddling it, it has a cool Machine feel to it.
I am quite satisfied, but there is a caveat.
Although not mentioned in the Instruction Manual, the Engine must be supported by a Jack or the Bolt may not fit.
Specifically, when removing the OEM FrontEngineMounting Bolt and replacing it with the Engine Mount Collar Bolt, the Engine was lowered and the Bolt did not fit properly.
To prevent this, the Engine must be supported by Jack.
If it does not fit easily, fine-tune the position with Jack and never forcefully tighten Bolt.
You should really be careful because the worst that can happen is that the Engine side will be damaged and you will fly hundreds of thousands of dollars for repair and replacement.
Even if you ask Shop to install it, it is safer to ask a reliable place such as Plaza.
The Instruction Manual does not list the tightening Torque, so there is also a risk in that regard if you ask a contractor who does not refer to the Service Manual.
View detail
2017 CB1100EX Active Frame
Excellent product shipped all the way to Canada very promptly. It is a quality item that I look forward to installing. Customer service from Webike was also excellent and I already have a list of other items that I will be buying from them. View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
resolving a severe earthquake
The tremors from 90 km dramatically disappeared and I am not tired at all even when touring long distances. View detail
Unobtrusively Custom
I bought it because I wanted to increase the number of BlackParts as much as possible.
It is also nice to see that the Pipe diameter is slightly larger than OEM.
I was wearing Zita's Under Guard.
The interfering area on the Right Side was shaved off.
View detail
T9GT performance damper
Install performance damper on my bike. Previously bike feels a bit wobbly during high speed, now it's more plant and stable. Highly recommend for others thank. View detail
Fits: HUSQVARNA 701 Supermoto, HUSQVARNA 701 Supermoto
If you want to run Circuit
When using a tire warmer when running on the circuit
With this, the front and rear tires can be raised with a single Lift Stand.
If you don't have it on, or with an Under Guard from another company, it will almost always fall over.
The Type I bought is not the older butchered or Cut-outType, but it's good enough for my purposes.
View detail
Ideal for Dress-up
This sub-frame enhances the poor BodyFrame and is thicker and more powerful than the OEMPipe diameter of the CT110 HUNTER CUB. The price is high, but I am satisfied with the quality and large size of the product. View detail
good performace Damper
It's more balanced The price is rather high, but I recommend it Solve anxiety and discomfort in a pure state at once I wonder why Yamaha sells them as accessories If you add it in a pure state, I think the evaluation of MT-09 will be better. View detail
High quality
Seen this engine sub frame on another monkey z50j and thought it looked awesome. I decided to take a chance on it with my z50j with a 190cc engine to see if it would fit.fitment is perfect and helps reduce vibration from the engine. The finish and build quality is very good.i recommend this product View detail
ActiveSub-frame
I'm glad I bought it...and I'm happy with it! It's cool! It looks a lot different (and better)! View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA TRACER900, YAMAHA TRACER900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900
Please come to Distance Gov.
[How is it used?
I use it only on holidays, touring about 300 to 500 km a day once or twice a month, and my tire is MichelinRoad6.
Was the installation difficult?
A friendly Instruction Manual is included, so it's easy as long as you have the necessary tools.
How was your experience with it?
My impression is almost the same as your Impression. The straight driving stability is improved and vibration is reduced, which definitely reduces fatigue during long tours. On the other hand, there are some negative impressions that the fluttering feeling is reduced, but I did not feel that way. On the other hand, I did not feel that the fluttering was reduced. On the contrary, I gave a positive evaluation to the cornering because it became easier to make a single shot to fall down at a low-speed corner and to make a gradual adjustment at a corner with loose curvature. Even on a rough road surface like Rokko, the stability during cornering is increased, so the throttle work is less affected by external disturbances from the road surface.
Before I switched to Toray Racer, I was driving an Adventure with a liter overweight of 270kg, and now I can once again enjoy the moist feeling of driving that I had then. However, the light weight of the vehicle has not spoiled its light mobility or ease of handling, so I am very glad that I installed it.
View detail
I like the thickness.
I wanted to make it look more OEM-like, so I chose this one by Takegawa.
Pipe diameter is larger than OEM, and the difference is obvious compared to OEM.
OEMs look shabby.
I could not feel the rigidity.
The alignment of the holes in the under cover is a bit of a challenge, but if all screws are adjusted with the screws lightly tightened, it can be easily inserted and installed.
View detail
Good
Installing the product is simple. Install the lift jack under the engine After releasing the bolt, install the subframe. The spacer was about 1mm larger. If you buff it after installing all the products, you can get the perfect glow. I used a chemical called pikal. View detail
a very good-looking item
First of all, it's a very good product. It's lighter and stronger than I thought. If the bike falls, I think I can protect it well. It makes the bike look even better on the outside. I highly recommend it. View detail
operability
The Frame feels less fluffy and feels like it can be operated TIGHTLY without blurring. The sense of security has increased. View detail
Can also be installed with MORIWAKIShortMONSTER S2 at the same time.
Was the one you received as per Image?
Although the price seems quite high, we choose this Manufacturer for future expandability over similar products.
Quality is, of course, also reliable and high quality.
Was the installation difficult?
First of all, the Exhaust System was replaced with ShortMONSTER S2, so we purchased it after referring to the images of the installed car to see if it could be installed.
I want you to look at the picture of God Clearance.
The installation itself can be done in about 30 minutes if you have the energy to crawl on the ground.
How was your experience with it?
I am more satisfied with the fact that the body looks large than with the engine protection.
However, the bolt is not a part that is finished once it is installed, as it seems to be held in place by a screw, so I think it is necessary to retighten the bolt periodically.
Installation Point or hang
The Corrugated Cardboard that contains the product is used as a matte. (Lol)
View detail