Please login to check coupons
Product Detail
Specification
Material: Solid aluminumManufacturer: KEPSPEED Company
Description
Here is a high-quality gem from KEPSPEED!
Aluminum subframe for Monkey 5L frame.
It supports you firmly from below!
The frame head and the lower part of the engine are strongly connected by using solid aluminum material.
It also acts as a damage protector.
It's oversized and powerful!
This subframe is made of aluminum square pipe and fully utilizes KEPSPEED's aluminum processing technology.
The upgraded look and feel is also a given.
[About the installation]
・Step side bracket
1. Install the bracket under the engine.
Use the front two holes of the four holes under the engine where the stock steps are installed.Insert the supplied 10mm collar between the engine and the bracket and install using the M8 flat head bolt.
2. Move the vehicle body harness to the underside of the frame neck.
The harness next to the frame neck interferes with the clamp when the clamp is installed.
Remove the harness and fixing bracket and move the harness to the lower side of the frame neck.
・Neck Clamp
3. Attach the clamp to the frame neck.
Attach the clamp to the frame using the M6 cap bolt with the special collar in between.
Adjust the gap between the upper neck of the frame and the clamp to 10mm-15mm so that the groove on the back of the clamp fits the frame.
After temporary assembly, align the clamp body and check the position.After adjusting the position, tighten the two M6 cap bolts on the lower side.
Tighten the upper one after installing the frame arm.
・Frame Arm
Attach the left and right frame arms using the M8 cap bolts.
Aluminum subframe for Monkey 5L frame.
It supports you firmly from below!
The frame head and the lower part of the engine are strongly connected by using solid aluminum material.
It also acts as a damage protector.
It's oversized and powerful!
This subframe is made of aluminum square pipe and fully utilizes KEPSPEED's aluminum processing technology.
The upgraded look and feel is also a given.
[About the installation]
・Step side bracket
1. Install the bracket under the engine.
Use the front two holes of the four holes under the engine where the stock steps are installed.Insert the supplied 10mm collar between the engine and the bracket and install using the M8 flat head bolt.
2. Move the vehicle body harness to the underside of the frame neck.
The harness next to the frame neck interferes with the clamp when the clamp is installed.
Remove the harness and fixing bracket and move the harness to the lower side of the frame neck.
・Neck Clamp
3. Attach the clamp to the frame neck.
Attach the clamp to the frame using the M6 cap bolt with the special collar in between.
Adjust the gap between the upper neck of the frame and the clamp to 10mm-15mm so that the groove on the back of the clamp fits the frame.
After temporary assembly, align the clamp body and check the position.After adjusting the position, tighten the two M6 cap bolts on the lower side.
Tighten the upper one after installing the frame arm.
・Frame Arm
Attach the left and right frame arms using the M8 cap bolts.
Caution
※ Some minor scratches and scuffs may occur due to transportation issues.
[Notes on purchase]
*All GM-MOTO products are custom parts.Since this product is designed for heavy users, it is not in accordance with the safety standards, and therefore, the riding performance may be degraded.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on the 4mini, or adjustments and modifications may be required.The expression "riding" used in various places refers to riding on private land.
※ This product has not been tested on all years.Depending on the year and other factors, the mounting direction of the base may need to be changed or modified.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*This product is exclusive for 5L frame.
*This product cannot be installed on 4L frame or FI frame.
*It cannot be installed with high type exhaust such as stock one.
*There may be interference with the down exhaust, so please adjust accordingly.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
