Reviews
Easier to see than expected
The quality is very good. The rear view is better than I expected because it can be mounted on the side, and the bar end mirror does not rotate loosely or shake with vibration as is common with bar end mirrors.
If the price were a little lower, I would have nothing to say.
View detail
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
Cospa is quite good.
Anyway, cheap is the best Merit.
The quality is in line with the price, especially the bolt on each part is quite cheap. Be careful not to over-tighten the bolt, as it can easily be nipped.
It is by far lighter than the expensive bar end mirrors of DAYTONA and TANAX, so there is rather less anxiety about it falling off.
View detail
Minimum required visibility
Size is small, so visibility is minimal.
On the contrary, it makes you look at it neatly lol.
It only worked well outward, but I don't feel like I've widened it that much.
With normal Mirror, the arms are reflected to a large extent and the camera is scared, but this has been eliminated, which is what we were aiming for!
Quantity of Washer:Only 1pc. is sandwiched, but there is no interference with Axel
Adjustment is a bit of a hassle…I had to adjust the angle of the clutch lever because it was interfering with the clutch lever.
Well, the rest is definitely Parenthesis good lol.
View detail
A little wobbly, but … looks good.
I installed it on CBR400R.
The handlebar was previously replaced and installed with 16mm inner diameter separate handlebars.
It will probably loosen and fall off while riding, so it must be retightened.
There is a wobble.
If you're concerned about it, you shouldn't.
View detail
Design Excellence
I have purchased high sider bar end mirrors in the past, and this time the quality is as high as ever.
There is no rattling or vibration-induced blurring.
Above all, the thinness and smooth finish of this Mirror and its design to match the Cafe racer are superb.
It is an expensive category for Mirror, but I think it is worth buying.
View detail
Installation on GROM
We are a FOR JAPAN MODEL distributor, and we will review the same products as DAYTONA products.
[How is it used?
I bought it because→OEMMirror is hard to see!
I bought this product because DAYTONA product is out of stock and the next one is supposed to be around 24/5.
Was the one you received as per Image?
Yes
Was the installation difficult?
→ The installation itself is easy (I installed it using the HighsiderBar EndMirror Adapter).
However, the removal of the OEMBar End was a challenge.
How was your experience with it?
→Now you can see directly behind you where you couldn't with OEMMirror!
[Included Parts:were they on?
⇒ yes.
[Was there anything that disappointed you?
→ nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
→Translation differs from DAYTONA products (does not come with the instruction manual, please enter here).
(The DAYTONA version of the instruction manual can be viewed on the DAYTONA website.)
Installation on vehicles after 2006 is at your own risk
View detail
DAYTONA Bar end mirror Montana II
We installed this handlebar facing downwards along with the crf250md47MOTARD conversion. The Handlebar area has been tightened up considerably and parenthesis has improved. I am now able to check the rear more than before with Mirror only, so I need to check visually. The price was a little high, but I'm glad I bought it because I was able to create my ideal custom. The price is well worth the quality. View detail
It's all right.
The product itself is good. The quality is high and there is no blurring.Quantity:Pair (for Left and Right) Ordered two for installation. However, they happened to be from different lots, and one of the screws for installation was silver and one was black. I'll have to get these colors aligned …. I'm patiently using it because it works fine. I'm thinking of painting them a color sometime soon. View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
SMART!
Bar end mirror, but in the case of Haimota, it fits perfectly in the OEM hand guard.
It will look better.
I like it because it is officially certified and will pass vehicle inspections as is.
View detail
Best Bar End Mirrors You Can Buy For Your Rebel 1100
Still, nowadays, there aren't many after-market parts for Rebel 1100 in the US. Stock mirrors are horrible, Can't see anything behind you with your stock mirrors. So, I have looked everywhere from eBay to Amazon, and found nothing that looks good. Also, it was hard to find all the parts that were required to install the mirrors if you found the mirrors. But, when I visited the webike website it was super easy, everything was so easy to find and super nice quality!! Love these DAYTONA bar end mirrors on my Rebel 1100. View detail
Different presence
I think it originated in Europe, but there are a few models here and there that have bar end mirrors as standard.
Inspired by that, I put it on Mr. MONKEY this time.
I am satisfied with the change from the OEM's Type, which insists on a great height, to the Compact and lower Forme at once.
However, as MONKEYOwners can easily imagine, there will be a lot of scaremongering.
It is unfortunate that the objects reflected in Mirror appear to vibrate quite a bit.
Well, if you can see it as Style oriented, it will be one of the good Custom.
I feel again that Custom is quite profound, and this improvement (modification?) is a good thing. I am very happy to see that the new
View detail
clear, wide field of view
I installed Kijima Tech 11 mirror bar end on Suzuki Hayabusa with adapter bar end and collar included. This mirror bar end has a very wide and clear viewing angle. The viewing angle can be adjusted according to the rider's position. View detail
Excellent Quality
About quality and texture: Very high quality machining and finish, glass is very clear. Products to buy together: Daytona bar ends Difficulty of installation: Sent to workshopto remove OEM Honda bar ends and core. Cost performance and comparison with other products: Preimum but value for money. View detail
Easy-to-obtain Bar end mirror
Breaking OEMMirror for imported cars is replaced as soon as possible because of concerns about delivery time.
The bar end mirrors provide good forward visibility, and on top of that, very good rearward visibility.
I was concerned about the Mirror shake due to the vibration of the Aprilia 2-cylinder engine, since it cannot be mounted on the OEMBar End.
Since we have no choice but to make our own Bar End, it would be helpful if we could have several types of Bar End with different weights in Option.
View detail
High sider Bar end mirror Montana II
I was looking for a crf250lsMOTARD with Mirror facing down and found this product. The price is also expensive for Mirror. However, it is well made. The Mirror does not shake due to vibrations while driving, so the mirror surface is clearly visible. However, the visibility is poor due to the characteristics of this Mirror. I am satisfied with this product because I value the appearance. View detail
Repurchase
We will share and repurchase.
For Bar End, Mirror is the only choice for high cider.
No complaints about the texture and rigidity.
The price is high, but the performance offsets that.
View detail
Good budget mirrors with a better viewing angle
About quality and texture, I can confirm that the quality is good and that the material used is aluminum alloy that has been machined to shape. About the feeling of use, These mirrors are less instrusive then the original mirrors and when fitted to the bike also offer a better viewing angle from their convex designed mirror. Products to buy together, While working on the handle bars it would be advantages to also add a set of more comfortable grips to your cart. Difficulty of installation, I can say the fitment of the bar end mirrors for my installation was very easy due to the simplistic design of how the mirrors secure to the inside of the handle bar pipe. Cost performance and comparison with other products, The pricing of the product is great. You receive a set of bar end mirrors that are of good quality and a great look. The pricing of the majority of the other bar end mirrors available are much higher for similar product. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
I installed it on my Grom. This is cosmetic.
I used it on a JC75 Grom.
I had been wearing Mirror by Mukawa, but I wanted to try Bar end mirror, so I was shopping around and this product caught my eye.
I bet the build quality is shoddy at this price...
I was surprised when I saw what I received.
Aluminum's Cut-outs were very well done.:Pair (for Left and Right) The price is surprisingly low for a
Grom's STD Handlebar has an M6 screw hole inside, so we used only the screw with the supplied Bar End Rose.
There was no Clearance with the Grip at all, so I used a Washer that I happened to have and Offset it about 4mm outward.
Mirror itself is quite small, but can it be used for practical purposes? It is like "Limit". Visual confirmation is necessary when changing lanes.
Thanks to the Handlebar, there is no vibration at all, which I was worried about.
The color of the mirror was also Blue in the Defferential Gearo, but a Plain mirror for replacement is also included, which is a perfect addition.
It is a little uncomfortable until you get used to it, but there is a Bar end mirror.
View detail
Looks good Parenthesis.
I put it on Up.
I can see more than I thought I could, but it's small, so I have to check visually.
I think there is quite a bit of flexibility in adjustment.
The M8Screw weight bar was left over, so it was installed using an M8→M6 InsertNut.
I think it is very Refreshing and Parenthesis like STREETFIGHTER!
View detail