Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
Specification
[Material] Component: Aluminum material[Type] Oval edge
[Color] Black / Carbon
[Size]
・Arm length: 120mm
・Arm width: 13mm
・Total length of bar end for mounting: 20mm
・Total length of flat surfaces that can be mounted inside: 18mm
・Collar large: I.D. 13.5 / O.D. 14.5
・Collar small: I.D. 9 / O.D. 13
・Special nut: M6
Cap bolt:M6 x length 45mm
・Mirror size: 78mm (H) x 118mm (W)
[Specification]
・Wide angle convex mirror
・Common to both left and right
・ECE certification number obtained
・KIJIMA Logo
[Quantity]
・Product body: 1 pc.
・Collar large: 1 pc.
・Collar small: 1 pc.
・Special nut: 1 pc.
Cap bolt:1 pc.
[Components]
・Instruction Manual
・M6 fixed bar ends
Description
This is 120mm shaft black oval edge bar end mirror with carbon surface ⇔ mirror surface 4.8mm thin and wide convex mirror, which is on the dark side and cyberpunk.
Jet-black appearance... Riding through the backside of TOKYO with its dark world view... From Daiba to Daikoku, flowing along the Bayshore Route with the Rainbow Bridge on the side.....
Flowing from Miyakojima with the howling exhaust in the darkness... The throttle grips hard at the prospect of the battle from Abeno...
CFRTP, a lightweight and high-strength material, is used for the lens backside with a plain weave real carbon matte plate, and the stem is made of machined aluminum.
The 6mm bar end fixing method with regular thread for standard 22.2mm handlebars and inch handlebars allows for installation on a wide range of models.
It is composed of two layers of plain weave carbon fiber, a middle layer of reinforced glass fiber and polycarbonate for excellent impact toughness.
The shaft has a hammerhead shape in order not to affect riding even if the mirror position is changed.
The mirror and arm can be rotated 360 degrees in a circular direction.
You can change the style of the lamp from upstyle for high visibility to understyle, which is essential for low style and cafe style.
The mirror is fixed to the attached bar end, so there is no need to move the stock switch or master system to the inside of the handlebar to make room for the mirror.
11 means justice and power.
Jet-black appearance... Riding through the backside of TOKYO with its dark world view... From Daiba to Daikoku, flowing along the Bayshore Route with the Rainbow Bridge on the side.....
Flowing from Miyakojima with the howling exhaust in the darkness... The throttle grips hard at the prospect of the battle from Abeno...
CFRTP, a lightweight and high-strength material, is used for the lens backside with a plain weave real carbon matte plate, and the stem is made of machined aluminum.
The 6mm bar end fixing method with regular thread for standard 22.2mm handlebars and inch handlebars allows for installation on a wide range of models.
It is composed of two layers of plain weave carbon fiber, a middle layer of reinforced glass fiber and polycarbonate for excellent impact toughness.
The shaft has a hammerhead shape in order not to affect riding even if the mirror position is changed.
The mirror and arm can be rotated 360 degrees in a circular direction.
You can change the style of the lamp from upstyle for high visibility to understyle, which is essential for low style and cafe style.
The mirror is fixed to the attached bar end, so there is no need to move the stock switch or master system to the inside of the handlebar to make room for the mirror.
11 means justice and power.
Caution
*Rearward visibility varies significantly depending on the mirror position.Please be sure to run a test run under clear skies and good visibility to familiarize yourself with the changes in visibility.*Fit the mirror to the attached bar end and fix it with screws.The overall width of the steering wheel (overall width of the bike) varies depending on the steering wheel angle.Please measure the dimensions before assembling the installation image.
*The attached bar end is clamped between the M6 x 45mm bolt and the collar, and then installed by hanging it inside the handlebar and tightening the M6 x 45mm bolt.Since most of the bikes with stock bar ends have the threading for fixing the bar ends welded inside the stock handlebars, the collar part for fixing the bar end mirror of this product may not fit into the bar end mirror depending on the bike.In this case, if the threading of the stock handle is to be used, the bar end of this product will need to be bored out.If you have any questions, please consult with your authorized bike dealer.
*Applicable to bikes with 22.2mm diameter handlebars and 25.4mm diameter (1 inches) handlebars, and bikes with stock handlebars that do not have pre-threaded threads for fixing stock bar ends or bikes with custom handlebars that have not been threaded.
*If the bar end is threaded, it is necessary to bore the bar end part to use the stock bar end fixing bolt.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
