Reviews
high quality
We were tired of OEM mirrors, and decided to switch to bar end mirrors, which we had been considering for some time. We were looking for a mirror with a reasonable price, a certain angular shape, and gold as the material, and arrived at VictorySeries. I bought this one with a high sider bar end and a cheap Mirror Hole Cover Cap, because the shape of the bracket can be tightened to the bar end and the surface treatment is also smooth.
Although the installation itself is not difficult, some people may have trouble removing the OEMBar End with Screw lock. If you are not confident in your muscular strength, we recommend you to use a long-spinner handlebar. The weirdest thing is to find a position where the Mirror can be installed at an angle that is both cool and practical. It's fun to do so, and I think everyone likes it.
I have an OEM handlebar on my Motorcycle, so I installed the Mirror up because it interferes with the Motorcycle and the Mirror when facing down. The distance to focus when looking at the Mirror and Meter is the same, so my eyes are not tired at all. Rearward visibility is also high, so you can see right behind you.
It is an OEM ratio, but the change is better looking and more practical. Good purchase.
Also, I have read on some sites that Mirror made by Hi-Sider is easy to fall off, but I have not had any problems at this point in time, about a year after the installation.
View detail
Great sense of luxury.
For Triumph Thruxtonfe.
BodyPlastic products are also available, but this Gold genus is very high-end.
OEMs will be removed.
View detail
Very good!
I used high cider a lot since I was headed there because it has a good texture and is easy to handle.
This product was less expensive than the rest of the Series, but the design matched the body of the car to which it was installed.
The bracket connected to the mirror is separate from the bar end and can be easily detached, so it can be used when driving on circuits, for example, and the angle can be easily changed or the top and bottom can be easily replaced.
The design and “y Casting feeling ” are also high Level, but the Variation of the Spec. and the ease of use are highly recommended.
You can be proud to say that you are a manufacturer in Germany.
View detail
Easier to see than expected
The quality is very good. The rear view is better than I expected because it can be mounted on the side, and the bar end mirror does not rotate loosely or shake with vibration as is common with bar end mirrors.
If the price were a little lower, I would have nothing to say.
View detail
Great Value
Perfect for the price. Fittment is great and very easy install. Mirror quality not 100%, but more than enough (given the cost). Fine if you are use to bar end mirrors. Two-way fit option is great. Perfect for the Hurricane bars. View detail
Design Excellence
I have purchased high sider bar end mirrors in the past, and this time the quality is as high as ever.
There is no rattling or vibration-induced blurring.
Above all, the thinness and smooth finish of this Mirror and its design to match the Cafe racer are superb.
It is an expensive category for Mirror, but I think it is worth buying.
View detail
Installation on GROM
We are a FOR JAPAN MODEL distributor, and we will review the same products as DAYTONA products.
[How is it used?
I bought it because→OEMMirror is hard to see!
I bought this product because DAYTONA product is out of stock and the next one is supposed to be around 24/5.
Was the one you received as per Image?
Yes
Was the installation difficult?
→ The installation itself is easy (I installed it using the HighsiderBar EndMirror Adapter).
However, the removal of the OEMBar End was a challenge.
How was your experience with it?
→Now you can see directly behind you where you couldn't with OEMMirror!
[Included Parts:were they on?
⇒ yes.
[Was there anything that disappointed you?
→ nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
→Translation differs from DAYTONA products (does not come with the instruction manual, please enter here).
(The DAYTONA version of the instruction manual can be viewed on the DAYTONA website.)
Installation on vehicles after 2006 is at your own risk
View detail
DAYTONA Bar end mirror Montana II
We installed this handlebar facing downwards along with the crf250md47MOTARD conversion. The Handlebar area has been tightened up considerably and parenthesis has improved. I am now able to check the rear more than before with Mirror only, so I need to check visually. The price was a little high, but I'm glad I bought it because I was able to create my ideal custom. The price is well worth the quality. View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
SMART!
Bar end mirror, but in the case of Haimota, it fits perfectly in the OEM hand guard.
It will look better.
I like it because it is officially certified and will pass vehicle inspections as is.
View detail
Best Bar End Mirrors You Can Buy For Your Rebel 1100
Still, nowadays, there aren't many after-market parts for Rebel 1100 in the US. Stock mirrors are horrible, Can't see anything behind you with your stock mirrors. So, I have looked everywhere from eBay to Amazon, and found nothing that looks good. Also, it was hard to find all the parts that were required to install the mirrors if you found the mirrors. But, when I visited the webike website it was super easy, everything was so easy to find and super nice quality!! Love these DAYTONA bar end mirrors on my Rebel 1100. View detail
clear, wide field of view
I installed Kijima Tech 11 mirror bar end on Suzuki Hayabusa with adapter bar end and collar included. This mirror bar end has a very wide and clear viewing angle. The viewing angle can be adjusted according to the rider's position. View detail
Excellent Quality
About quality and texture: Very high quality machining and finish, glass is very clear. Products to buy together: Daytona bar ends Difficulty of installation: Sent to workshopto remove OEM Honda bar ends and core. Cost performance and comparison with other products: Preimum but value for money. View detail
High sider Bar end mirror Montana II
I was looking for a crf250lsMOTARD with Mirror facing down and found this product. The price is also expensive for Mirror. However, it is well made. The Mirror does not shake due to vibrations while driving, so the mirror surface is clearly visible. However, the visibility is poor due to the characteristics of this Mirror. I am satisfied with this product because I value the appearance. View detail
I installed it on my Grom. This is cosmetic.
I used it on a JC75 Grom.
I had been wearing Mirror by Mukawa, but I wanted to try Bar end mirror, so I was shopping around and this product caught my eye.
I bet the build quality is shoddy at this price...
I was surprised when I saw what I received.
Aluminum's Cut-outs were very well done.:Pair (for Left and Right) The price is surprisingly low for a
Grom's STD Handlebar has an M6 screw hole inside, so we used only the screw with the supplied Bar End Rose.
There was no Clearance with the Grip at all, so I used a Washer that I happened to have and Offset it about 4mm outward.
Mirror itself is quite small, but can it be used for practical purposes? It is like "Limit". Visual confirmation is necessary when changing lanes.
Thanks to the Handlebar, there is no vibration at all, which I was worried about.
The color of the mirror was also Blue in the Defferential Gearo, but a Plain mirror for replacement is also included, which is a perfect addition.
It is a little uncomfortable until you get used to it, but there is a Bar end mirror.
View detail
Looks good Parenthesis.
I put it on Up.
I can see more than I thought I could, but it's small, so I have to check visually.
I think there is quite a bit of flexibility in adjustment.
The M8Screw weight bar was left over, so it was installed using an M8→M6 InsertNut.
I think it is very Refreshing and Parenthesis like STREETFIGHTER!
View detail
Prefer the shape
I like it very much, partly because I like Round Type Mirror, but it seems that some mirrored surfaces have letters and some do not, depending on the time of production.
When set to Under, the appearance changes dramatically and forward visibility increases, but it is a little uncomfortable at night.
When installed on REBEL 1100 and fully locked in Under, there is no contact with the Tank.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
I think it is cooler than OEM.
Personally, I don't like the shape of the OEM because it looks like Mickey Mouth's ears, so I replaced it immediately. If it's just strength, the OEM looks stronger, but I think the Mirror field of view itself is better visibility here. View detail
As cool as you'd expect.
Bar End to match when replaced with DAYTONA Handlebar.
It looks luxurious and I am very satisfied.
The "DAYTONA HIGHSIDER" is attached with "Up" because it is difficult to see when it is facing downward and cannot be attached with Mirror alone. (High Cider) Bar EndMirror Adapter Quantity for Motorcycle:Pair (for Left and Right) It is recommended to purchase "SEA BASS 6mm Bolt Compatible" together.
View detail
It has a luxurious feel to it
I was looking for a Mirror that would look good on MOTARD.
Certain Manufactures used by foreign countries are not affordable because of their outrageous prices, but this Mirror is not cheap for the price.
There is little rattling and no shaking while driving.
I did not use the supplied bar end parts, but prepared and installed a separate Clamp on the Handlebar.22φIt seems that the Handlebar can be used without the Clamp.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
Don't buy cheap stuff, buy this one!
Replaced a cheap Bar end mirror
Low vibration and good visibility
You should have bought this one from the start instead of the cheap one.
There is a dedicated Adapter, but I don't want to add unnecessary parts, so I lengthened the Handlebar dimension and put Mirror directly on it.
View detail