Reviews
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled)
Impossible to pass self-running with Passing ...
After attaching this Switch to Z2, as soon as I pressed the Passing switch with confirmation of operation, the spark scattered from the Handlebar Switch and the Fuse flew.
When I tried to disassemble it, there was a Ball pressed by Spring at the base of Passing and Horn switch, that Ball jumped to the beat which pushed the Switch and was in contact with the electric path and was shorting.
I was fortunate to be unlucky that I was not on the road, but have PMC properly tested it?
I became frightened to continue using it and exchanged it with a product of a certain Z specialty shop.
Although Fuse just flew this time, it seems that there are cases where other electronic systems are involved in some cases.
I think that it is an extreme Case, I think that it is a product of Recall.
View detail
Fits: BMW R1200GS ADVENTURE(Adventure), BMW R1200S, BMW R1200ST, BMW R1200R, BMW R1200RT, BMW K1200S, BMW K1200R SPORTS, BMW K1200R, BMW R1200GS, BMW K1600GTL, BMW K1300S, BMW K1600GT, BMW K1300R, BMW K1300GT
It is the lowest item.
Although I purchased it by designating a car type and checking conforming car type, in fact it was not possible to install. Probably, it seems that something like Adapter is required separately, but I just bought Waste without explanation at the time of purchase. I would like to ask the opinion of Manufacturer side by all means. View detail
Fits: HONDA VFR750F, HONDA CB1100F, HONDA CB900F, HONDA CB750F, HONDA CBX1000, HONDA VFR400R, HONDA CB400 SUPER FOUR, HONDA STEED400, HONDA CBR500R, HONDA SHADOW400, HONDA CB500S, HONDA CB-1, HONDA CBR250R, HONDA CB500, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR900RRFire blade, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400F, HONDA NT650VDEAUVILLE
It did not attach to VFR 400 R NC 30
Removing Cowl, removing Wheel, removing Front fork, and removing Stem, how Bearing did not match.
I'm sorry.
View detail
It's the worst.
This product is in the Lever insertion part before use and defective at the time of molding (Rubber's poor running) There is
I will rip at the same time I put it in.. I did return processing earlier, but what will happen.
View detail
Fits: YAMAHA XJR400 R Model: 4HMA-D Frame number: 4HM, YAMAHA XJR400 R Model: 4HM1-9 Frame number: 4HM, YAMAHA XJR400 R Model: 4HME-L Frame number: RH02J, YAMAHA XJR400 Model: 4HMA-D Frame number: 4HM, YAMAHA XJR400 Model: 4HM1-9 Frame number: 4HM, YAMAHA TDM900, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA SRV250, YAMAHA FZS600 Feather, YAMAHA SRV250, YAMAHA FZS600 Feather 00-02 Form: 5DMC, YAMAHA FZS600 Feather 00-02 Form: 5DM7, YAMAHA FZS600 Feather SP 00-01 Model: 5DMF, YAMAHA FZS600 Feather SP 00-01 Form: 5DMC, YAMAHA FZS600 Feather SP 00-01 Form: 5DMA, YAMAHA FZS600 Feather S 00-01 Form: 5DMF, YAMAHA FZS600 Feather S 00-01 Form: 5DMC, YAMAHA FZS600 Feather S 00-01 Form: 5DMA
There is a problem with this site instead of a product
It conforms to Yamaha RENAISSA, but it does not fit at all.
I contacted the returned goods, but the correspondence is very bad, and the return shipping fee must be borne.
I will never buy this site again.
It is a complete hare..
View detail
Fits: HONDA WAVE110, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk, HONDA Forza300, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk
It is not a special item.
This is the Universal Product that will be sent though it is a special item.
Rigidity seems to be strong, but the price is high. The same thing comes out cheaply at Yahoo auction.
View detail
Performance incompatible with price and installation effort
I will write here as I get OEM Product No. of Africa Twin
attachment - accuracy
It is rather troublesome to install it yourself
Handling Instruction Manual etc. are not attached. I need to investigate myself
Wiring processing is necessary although it is OEM
It is troublesome to exchange the Grip on the Axel side because the adjustment of the play of Wire is on the Throttle side
It is hard to do because it is a construction that should be installed at the time of production
quality - Textured Grip
It is slightly stiff
It is the diameter of Grip which is almost the same as OEM if you force your cousin
Performance - function
It is not as warm as I thought
Warm Groves and It Warm - - - Wonder? - - It is about
If it is December, the effect can hardly be felt when the sun is falling. It will be slow to get cold. It will not go without saying that it is midwinter
The output can be adjusted in 5 stages, but it's already subtle in 5, so it makes no sense at all. 1 absolutely can not be used. It is useless function
At the time of use, the LED of the Switch will emit light, but this light is dazzlingly dark and disturbing at night. Since Meter displays a display, I do not need it
Cost performance
It is bad
Performance is not suitable for price and installation effort
I see Net in the old type Grip heater that the calorific value is high
It can not be installed with Single Body. Mounting Attachment is required Mounting Attachment is
It is only 2700 yen but it is only Large amount of Tie Wrap and boring parts, it is 2700 yen like this on licking
Comprehension
I can not use it for price. Even if there is better than nothing change. It is about Level.
I think that it is better to ask Shop if you do not have confidence in the installation
View detail
It is too cruel.
Originally purchased for using Outer cable only.
Cable's weak point is that the cable surface is rattling, so Clutch lever Touch "Kakkkakakutsu" It will be.
So I decided to make the Inner cable in a single Cable and use only the Teflon coating inside the Outer cable to improve Lever's Touch, but an unexpected incident occurred at the end of the Outer cable.
The diameter of the end of Outer cable is 7 mm shorter than OEM.
OEM 8?.
If there is an error of 1?, Every time Clutch is operated, it gaps and the side of the Lever holder is scraped off. In the long term, the hole of the Holder becomes large and the Lever holder has to be exchanged.
Photo Quantity : 1pc. The eye is an image of the end diameter of KITACO Clutch Cable.
Image on the Holder side inner diameter is measured on the second sheet.
The third piece is an image with Normal cable.
Quantity : 1 Set of 4pcs. Eyes are images containing KITACOCable.
Cable is certainly more resistant to bending if it is more than double, but there is no need for it to be more than double if it is OEM's handling.
Even if Inner is not Stainless Steel, as long as Maintenance is done with Oil, there is no problem at all.
I made something awesome Clutch Cable, but I can not do anything with singing phrases alone.
Mouth "Arorn Boring" It has solidified as it is.
I watched terrible external parts for the first time in a long time.
With this, you can not use it as it is, and Holder will become useless if you use it.
When Wei Big contacts KITACO, KITACO 's answer is "There is no harm in using. It is said that it was an answer. With this there are hurdles too much - - -.
View detail
To remove the Handlebar Switch
Buy Left Handlebar Switch for Headlight switching at removal.
I will match on my own vehicle that uses Plating parts frequently, but SwitchBody (Particularly resin portion) And Handlebar fitting parts feel very cheap making.
It is a product that can be installed without difficulty if you understand Wiring. It would be even better if you could prepare a Wiring diagram.
I fixed a commercially available Rubber sheet between Handlebar and Switch mounting parts.
Just ... It also checked the operation and there was not any problem in the operation, but again the cheapness was conspicuous, I did not like it, I was forced to restore it.
Style emphasis If Custom is refreshing around Handlebar, if such a Custom is your favorite item is not it a good product.
As above, if you can refer ...
View detail
With the renewal around Handlebar
Other companies also had similar products, but purchased this because it was cheap.
There is no manual attached to the manual so please refer to Manufacturer's website.
Do not forget to prepare the Wiring diagram of your own vehicle for installation at DIY.
The structure is simple, but making is a little cheap. I think that it is a price equivalent.
Since it is not Waterproof Specification, concern about durability. In addition, the resin part also has considerable cheapness.
Does not expect excessive, is not it good for Style-oriented Custom.
Not recommended for those who do Wiring's first work for the first time.
Us, installation. Operation verification - I did it until the trial run, but after all I did not like the cheapness and restored it ...
For your information
View detail
To Custom around Handlebar
Inspected goods received and confused.
For mounting screws BALI many.
Especially the head of the Minus screw for ThrottleInner rattling prevention is severe, it is difficult to adjust because the tip of the slotted screwdriver does not enter.
Outer's Black Painting is very mottled and it is very suspicious whether it is really a shipping item after inspection work. (We decompose all products on our Manufacturer's website blog - Although there was content to the effect that inspecting is done)
Throttle's backlash is more than expected and unpleasant for ease of use.
I did not expect excessive expectation for Universal Product, but I do not think that it is here and it will not be very disappointing.
It is not inexpensive price range, so it is honestly useless expenses ...
If purchase directly from Manufacturer it may have been possible to consider returning, but after breaking the seal and tampering, I gave up the return.
The gap between the throttle holders after installation was also very wide, not clearly acceptable Level gap.
Based on this reason, I realized that purchasing universal type parts must be done cautiously.
☆ Evaluation is also unavoidably one because there is no 0.
We are sorry for those who like our Manufacturer products, but we will consider Holder made by other Manufacturer products.
View detail
Fits: HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY BAJA, HONDA MONKEY, HONDA 12VGORILLA, Others Vehicles equipped with SP Mukawa's Manual clutch kit, HONDA 12VMONKEY, HONDA 12VMONKEY, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA 12VGORILLA, Others Vehicles equipped with SP Mukawa's combination switch
If this price is at this price ...
The Mirror hole of MONKEY was originally 8 mm, and since Mirror Holder or Brake holder should be changed to Mirror, Mirror hole can be changed. Although purchasing this item ... Although it is good to fix Holder "Pin" This is a songwriter !! I used a split Pin, but this is "Kusso hard, hard, hard!" It will not enter! It will not enter even if you use vice in Hammer! I added Objection to Webike.
I will exchange such a state because it can not be confirmed here. Although it was thing with, it turned out that when looking at Net, it turned out that there were many other such events, so the person who is bought from now is the day ○ Naughty ○ I think that it is better to buy a Hol holder.
This quality is awesome at this price.
View detail
This time Ha Gap
I purchase it every time I exchange Motorcycle.
Vmax 1200 This time I felt something wrong with Clutch side from the beginning. Compared with NORMAL, it was still far away. (Closest position) With the passage of time Clutch went bad and began to slide. Because it hindered running, only Clutch side returned to NORMAL.
Although the car model so far has been adapted, this time it is regrettable with Hapa Gap products.
View detail
Fits: YAMAHA YZF750/R, YAMAHA FJR1300, KAWASAKI ZZR1200, KAWASAKI ZZR1100, KAWASAKI ZX-10, KAWASAKI GPZ1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI VULCAN1500 MEAN STREAK(VULCAN Mean Streak 1600), KAWASAKI VULCAN1500 DRIFTER(VULCAN DRIFTER), KAWASAKI VULCAN1500 CLASSIC/FI(VULCAN900 CLASSIC), KAWASAKI VULCAN1500 CLASSIC TOURER/FI(VULCAN400Classic tourer), KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX, Others Universal, YAMAHA YZF1000 THUNDER ACE, YAMAHA XJR1300
Durability is unlikely - - -
I installed it in ZEPHYR 1100. I bought it for a while after purchase, but after a half year from the start of use Brake was damaged if the Adjuster part of Lever on the brake side was damaged, or Brake did not work properly unless it grasped quite deeply.
Of course, there are no falls or excessive shocks.
I chose it by appearance, but I can not recommend it for safety.
View detail
Fits: HONDA CBR600RR, HONDA CB1300 Super Four, HONDA CB400FOUR (air-cooled), HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA CBR929RRFire blade, HONDA CBR954RRFire blade, HONDA CRM250AR, HONDA MAGNA750, HONDA STEED400, HONDA STEED600, HONDA MAGNA(V-TWIN MAGNA), HONDA VTR1000FVTR1000F FIRESTORM, HONDA XR250MOTARD, HONDA CB400SS, HONDA X4, HONDA X11, HONDA VFR800, HONDA VFR400
It can not be installed in OEMTop Bridge of VTR 250
Although there is a description with VTR 250 in the compatible model, in OEMTop Bridge Socket interfered with Top Bridge and could not be tightened.
If you try to forcibly tighten you will lick Nut or Top Bridge will get scratched.
It should not be possible to tighten with proper Torque.
If you are replacing the Stem Nut with the OEMTop Bridge of the VTR 250, please purchase the same M20 as OEM.
By the way, the overall evaluation was made as one star, but the goods themselves are good.
It is very disappointing.
View detail
Fits: YAMAHA XT600E, YAMAHA XT400, YAMAHA XS400, YAMAHA XS250, YAMAHA XS250, YAMAHA XS250, YAMAHA XS250, YAMAHA SR250, YAMAHA FZR750R(OW-01), YAMAHA YZ80, YAMAHA YZ80, YAMAHA YZ125, YAMAHA XJ650, YAMAHA XJ650, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400, YAMAHA XJ400
Cost performance is good
OEM Product broke due to fall, so buy it quickly.
Shape is almost the same as OEM Product.
However, the part to put the back O-ring was partially filled with paint...
I do not know if it happens or is it all.
Since it is temporary, it is installed with Owithout Ring.
There is somewhat backlash, but feeling of use is no problem.
View detail
Fits: SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS].
Disappointment
I was expecting to see other people's impressions, but I could not realize the difference with OEM.
It is due to my own mind. I thought, compared to the ADDRESS V 125 of OEMHandlebar, the opening of Throttle did not change.
View detail
As a function of Grip is the lowest
It is an impulse using over a year.
The function of Heater was not a problem but the minimum function as a grip is bad.
I drive without much grasping as my own driving, but depending on Gloves Axel will return in my hand and I can not concentrate on driving. It can not be OEM's Grip or outside Grip.
Perhaps I think the surface is caused by resin rather than Rubber quality.
The material is a problem, long time (About 12 hours including break) Numbness was occurring in the palm when driving. This is also a symptom that was not before changing the Grip.
There is more than that, I'm worried about replacing it with OEMGrip.
View detail
Fits: HONDA WAVE110, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk, HONDA Forza300, HONDA WAVE125, HONDA Zuma X, HONDA CB1100, HONDA CB1100 EX, HONDA SCOOPY-i, HONDA dunk
Even though there is adaptation to PCX 125 - -.
I bought it as being adapted to PCX, but when installed, it interferes with the Brake lever and the Stop-lamp stays on as it stays. Also, when hitting Shield Handlebar is Quantity : Pair (for Left and Right) Both will not be able to finish to the limit.
"Processing is necessary" If it says, do not put it on the adaptive vehicle. I did shopping entirely useless.
View detail
It is not warm.. It will not pass in winter.
I'm sorry, it is not warm. Part of the Grip heater (Not all circumference) , And the temperature does not rise too much. Warm your fingertips even if you set the maximum temperature (Keep warm) It does not reach the purpose of. By saying OEM, there was no discomfort in Grip feeling, but I felt that price and performance did not match.
Another Honda car is equipped with Honda OEM, but this one is very good. You can commute comfortably even in winter.
View detail