Reviews
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It's easy.
Seal for easy installation!
The light blue reflection alone has a custom feel!
I loved it.
View detail
It is a good product
I installed it on my SR400. It is a good product, and the fact that it is Japanese Vehicle Inspection Correspondence is a high point. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
The shape and reflection are fine, but ...
This is a comparison with AZMirror made by Tanax.
The first TANA-X AZMirror I installed was too small, and the second was too small.
I replaced them because they became difficult to see due to vibration while driving at high speeds.
It looks just like the Image and was not difficult to install,
After installing the lens, I tried riding it and found that the reflection was at the ideal large size,
It is less sensitive to vibration than AZMirror and easier to see.
Unfortunately, there is no Rubber between the Mirror section and the Body,
AZMirror was better in detail where Mirror's cut surfaces were visible.
Except for that part, Hi-Viz Mirror is better in terms of performance,
I am satisfied because this is a safer way to drive while driving.
View detail
![Slender Switch [Flat Seesaw Type]](https://img.webike-cdn.net/catalogue/images/129660/79339_TS.jpg)
Not Standard Size
25.2mm, so it will be sandwiched between the rubber plates.
However, Rubber sticks out, does not pinch properly, etc. Stress builds up subtly.
In the end, I managed to attach it, but I was not satisfied with the wobble, the subtle texture, and the fact that it was rather large for a skimmer Switch.
I think it would be better to use a 22mm size made by NAKA0 with waterproof and wiring processing...
Well, it's too much trouble to replace it, so I'll use it until it breaks.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
Fits: Others , SUZUKI V STROM 650
Easy to install
Model:YZF-R25
I was about to buy Repair/Option Parts, but changed my order because Body was on sale for less. I have used it before to reduce vibration on a single cylinder and I am using it on my R25. Recently, I have been trying to increase or decrease the weight because I am concerned about the vibration, and when I made it heavier than 350g, my whole arm went numb, so now I am going to try 300g.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI GPZ900R, KAWASAKI W800, KAWASAKI W800STREET, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZRX, KAWASAKI ZRX-2
For installation of Grip heater on GPX750R.
The OEM throttle pipe with many ribs had to have the ribs cut off in order to install the grip heater, which is a large amount of work, so I was not sure if it would fit. The part numbers of the wire and switch box are the same, and only the Throttle pipe part number has changed, so I bought it assuming that if the part numbers of the wire and switch box are the same, it would physically arrive.
The result is satisfactory for pontoon use.
View detail
The quality of modeling is rather good.
Material:Plastic and relatively well formed, there was no BALIetc.
Female thread side has embedded Nut for secure installation.
Well, it's still a bit expensive there, so I hope it's a bit cheaper.
View detail
We used it for Hazard switch!
The other item of the same brand, the Blinker relay with Hazard switch function, is under the Seat, and from there the Wiring for the switch is extended to the switch part on the Axel side, but the length is not enough, so I needed a Wiring extension.
Once attached, the Switch looks as if it has been around for a long time.
Above all, DL1000 V-STROM250SX Color:I like the fact that it is a YellowMODEL with a Yellow-colored switch!
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It reduces glare.
When the Mirror is attached, there is a small gap and the original Mirror can be seen.
This is an escape from Mirror's individual differences, so
It is normal for a gap to form.
The gap is so small that you have to look closely to see it, so it doesn't bother me.
The Mirror on the Right Side did not fit due to individual differences, but I warmed up the edge of the Mirror with a dryer and adjusted it.
It is a little bit easier to see backward, but...
It is not for those who expect a wide angle as it is not excessively wide.
Blue Mirror is self-sufficient.
I'm glad I put it on
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI Z650RS, KAWASAKI ELIMINATOR
Position Improvement
Handlebar felt far away, so it became quite easy.
It was a little strange because I had to replace it by myself, but if someone supports me, I think I can easily put it on!
View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA XR50 Motard, HONDA XR100 Motard
Easy-to-use Handlebar
I used it on 3 different vehicles. I used this handlebar on 3 different vehicles and it worked well even though the vehicles were of different sizes. cb400sf can pass the inspection as it is. View detail
Exquisitely shaped Barrel Style Grip
We also use other products from the GRIPPYGRIPSeries and
I try to Check when a new Type is released.
I didn't notice it until I actually held it, but it is actually barrel-shaped.
The thickest part is just under 35mm, and the thinnest parts are just under 33mm, loosely taper to the ends.
Barrel-shaped barrels are not a good match for SportsNAKED, as they give a strong impression of classicism.
This product was not uncomfortable to install because the raised area is very slight.
The accuracy is not good, but if you draw a line on the photo, you can see that it is almost Straight shape.
Active：Elastomer TaperGrip
https://www.webike.net/sd/23817728/
domino：Road Type Grip
https://www.webike.net/sd/21649162/
I have also used a simple Taper shaped Grip of the Sports Type as shown above.
The thinnest part where the thumb rests is thin-walled.
Vibration isolation performance tends to be poor, and it is necessary to keep gripping the Axel to maintain the Axel opening.
Avoid the slender part and hold a little outside, etc. Otherwise, you will be fatigued.
This product has a thick enough wall even at the thinnest part to prevent fatigue.
The Center portion is thick so that the Axel opening can be maintained by lightly pressing the hand against it without a strong grip.
The feeling of the Clutch and Throttle operation changes depending on the position of the force applied.
If you are conscious of adjusting the position of your thumb when starting and cruising
The grid-shaped mold grips firmly, requiring minimal gripping force.
I was concerned that the DAYTONA Logo was so large that it was ruining the GridDesign.
This Logo is only on one side, so it can be rotated 180 degrees and installed in a different orientation.
It retains a more classic appearance, but I would have liked it to be in a more discreet position.
(★-1)
This time I installed it so that the Logo is on the top side, but next time I will turn it to the back side.
Also, it is a fluffy RUBBER in both good and bad ways, so the corners round off quickly.
It is not Level wear that makes it immediately unusable, so it is not necessarily less durable, but
Performance at the beginning of use may not last long.
I'm going to move away from this product impresion, but the same GRIPPYGRIPSeries
Especially for two-color molded Type, the deterioration in usability is noticeable before the appearance.
View detail
To match Grip.
I changed the blue end to this one to match the grip to black. The brake lever is gold, so the grip is black and the end is also black. View detail
Because I purchased only one by mistake.
I made a mistake and only bought one, so I ordered again. m (_ _) m View detail
I think it's a good idea.
I replaced the handlebar with a new one because I could not see the Mirror I had been wearing. View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA CT110 HUNTER CUBCT125, HONDA Rebel1100, HONDA Rebel250, HONDA Rebel500, HONDA CL250, HONDA CL500, HONDA GB350, HONDA GB350S, HONDA DAX125
The anti-glare effect is perfect.
Since it is simply attached to Normal mirror, anyone can install it as long as they do not fail in positioning.
The anti-glare effect is effective against the Light of following vehicles during the day when the sun is strong and at night.
The degree of wide angle is not very promising. There is no difference between NORMAL and LARGE in actual view.
View detail