- Home
- Product reviews
- Motorcycle Parts
- Handles & Control Parts
- Grips
- Exquisitely shaped Barrel Style Grip... (DAYTONA: GRIPPYGRIP GRID)
【DAYTONA】GRIPPYGRIP GRID Review
Exquisitely shaped Barrel Style Grip
We also use other products from the GRIPPYGRIPSeries and
I try to Check when a new Type is released.
I didn't notice it until I actually held it, but it is actually barrel-shaped.
The thickest part is just under 35mm, and the thinnest parts are just under 33mm, loosely taper to the ends.
Barrel-shaped barrels are not a good match for SportsNAKED, as they give a strong impression of classicism.
This product was not uncomfortable to install because the raised area is very slight.
The accuracy is not good, but if you draw a line on the photo, you can see that it is almost Straight shape.
Active:Elastomer TaperGrip
https://www.webike.net/sd/23817728/
domino:Road Type Grip
https://www.webike.net/sd/21649162/
I have also used a simple Taper shaped Grip of the Sports Type as shown above.
The thinnest part where the thumb rests is thin-walled.
Vibration isolation performance tends to be poor, and it is necessary to keep gripping the Axel to maintain the Axel opening.
Avoid the slender part and hold a little outside, etc. Otherwise, you will be fatigued.
This product has a thick enough wall even at the thinnest part to prevent fatigue.
The Center portion is thick so that the Axel opening can be maintained by lightly pressing the hand against it without a strong grip.
The feeling of the Clutch and Throttle operation changes depending on the position of the force applied.
If you are conscious of adjusting the position of your thumb when starting and cruising
The grid-shaped mold grips firmly, requiring minimal gripping force.
I was concerned that the DAYTONA Logo was so large that it was ruining the GridDesign.
This Logo is only on one side, so it can be rotated 180 degrees and installed in a different orientation.
It retains a more classic appearance, but I would have liked it to be in a more discreet position.
(★-1)
This time I installed it so that the Logo is on the top side, but next time I will turn it to the back side.
Also, it is a fluffy RUBBER in both good and bad ways, so the corners round off quickly.
It is not Level wear that makes it immediately unusable, so it is not necessarily less durable, but
Performance at the beginning of use may not last long.
I'm going to move away from this product impresion, but the same GRIPPYGRIPSeries
Especially for two-color molded Type, the deterioration in usability is noticeable before the appearance.
ด้ามจับสไตล์ Barrel ที่มีรูปทรงสวยงาม
นอกจากนี้เรายังใช้ผลิตภัณฑ์อื่นๆ จาก GRIPPYGRIPSeries และ
ฉันพยายามตรวจสอบเมื่อมีการเปิดตัวประเภทใหม่
ฉันไม่ได้สังเกตเห็นมันจนกระทั่งได้ถือมันจริงๆ แต่จริงๆ แล้วมันเป็นรูปทรงถัง
ส่วนที่หนาที่สุดคือไม่เกิน 35 มม. และส่วนที่บางที่สุดไม่เกิน 33 มม. โดยจะเรียวจนสุดปลาย
ถังทรงถังไม่เหมาะกับ SportsNAKED เพราะมันให้ความรู้สึกคลาสสิกอย่างมาก
สินค้าตัวนี้ติดตั้งได้ไม่อึดอัดเพราะพื้นที่ยกน้อยมาก
ความแม่นยําไม่ดีแต่หากวาดเส้นบนภาพถ่ายจะเห็นว่าเกือบจะเป็นรูปทรงตรง
ใช้งานอยู่:อีลาสโตเมอร์ TaperGrip
https://www.webike.net/sd/23817728/
โดมิโน:ด้ามจับแบบถนน
https://www.webike.net/sd/21649162/
ฉันยังได้ใช้กริปทรงเรียวแบบเรียบง่ายของประเภท Sports ดังที่แสดงไว้ด้านบน
ส่วนที่บางที่สุดที่วางนิ้วหัวแม่มือคือผนังบาง
ประสิทธิภาพการแยกการสั่นสะเทือนมีแนวโน้มที่จะไม่ดี และจำเป็นต้องจับ Axel ต่อไปเพื่อรักษาช่องเปิดของ Axel
หลีกเลี่ยงส่วนที่เรียวและถือไว้ด้านนอกเล็กน้อย ฯลฯ ไม่อย่างนั้นจะเมื่อยล้า
ผลิตภัณฑ์นี้มีผนังหนาเพียงพอแม้ในส่วนที่บางที่สุดเพื่อป้องกันความเมื่อยล้า
ส่วนตรงกลางมีความหนาเพื่อให้สามารถรักษาช่องเปิดของ Axel ได้โดยการกดมือเบาๆ โดยไม่ต้องใช้มือจับที่แข็งแรง
ความรู้สึกของการทำงานของคลัตช์และคันเร่งจะเปลี่ยนไปขึ้นอยู่กับตำแหน่งของแรงที่ใช้
หากคุณมีสติในการปรับตำแหน่งนิ้วหัวแม่มือของคุณเมื่อออกตัวและล่องเรือ
แม่พิมพ์รูปทรงตารางจับยึดได้อย่างแน่นหนา โดยต้องใช้แรงยึดเกาะน้อยที่สุด
ฉันกังวลว่าโลโก้ DAYTONA มีขนาดใหญ่มากจนทำลาย GridDesign
โลโก้นี้อยู่ด้านเดียวเท่านั้น จึงสามารถหมุนได้ 180 องศา และติดตั้งในทิศทางอื่น
มันยังคงรูปลักษณ์ที่คลาสสิกกว่านี้ แต่ฉันอยากให้มันอยู่ในตำแหน่งที่สุขุมรอบคอบกว่านี้
(★-1)
ครั้งนี้ผมติดตั้งให้ Logo อยู่ด้านบน แต่คราวหน้าจะกลับด้านครับ
นอกจากนี้ ยังเป็นยางที่ฟูทั้งด้านดีและไม่ดี ดังนั้นมุมจึงปัดออกอย่างรวดเร็ว
ไม่ใช่การสึกหรอระดับที่ทำให้ไม่สามารถใช้งานได้ทันที ดังนั้นจึงไม่จำเป็นต้องมีความทนทานน้อยลง
ประสิทธิภาพเมื่อเริ่มใช้งานอาจอยู่ได้ไม่นาน
ฉันจะย้ายออกจากการแสดงผลผลิตภัณฑ์นี้ แต่เป็น GRIPPYGRIPSeries เดียวกัน
โดยเฉพาะอย่างยิ่งสำหรับประเภทแม่พิมพ์สองสี การเสื่อมสภาพในการใช้งานจะสังเกตเห็นได้ชัดเจนก่อนที่จะปรากฏ.
Responses
Other reviews
shock
I learned that what I had been using was just Rubber.
After using this, I have no confidence in using any other Grip.
Fit as if absorbed into the palm of the hand, with sufficient cushioning to prevent fatigue.
A non-habitual design that can be attached to bobber, chopper, caferacer, etc. regardless of genre.
Recommended
View detail