Reviews
Cost performance is high
OEM Bleeder Bolt was deteriorating, so this Material is less likely to deteriorate.:I purchased a TitaniumBleeder Bolt.
The quality is high for the price, and I think the cost performance is very high.
The weight is about half that of the OEM at 3.5g compared to 6g, but for general use, there may not be much difference.
As for the cap, NisshinOEM Product cannot be used due to its slightly long shape, so it must be prepared separately.
For us, the Cap sold at Straight, a tool store, was just fine.
It would be helpful to have more ZETA TitaniumParts in the lineup, as the other ZETA TitaniumParts also have high cost performance.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Replaced because it was rusted.
I bought this Motorcycle used, so I replaced it with a Caliper while I was doing CaliperOH.
I bought this one because the existing one had some rust.
View detail
Perfect for Repair from NORMAL!
[How is it used?
NORMAL BreedBolt came rusty and Pad pin Material:The Titanium unit was replaced with a Titanium one, so it was installed along with the Titanium unit.
Was the one you received as per Image?
As expected of Material:Titanium! It is lightweight, perfectly accurate, and very beautiful.
Was the installation difficult?
It is only a matter of replacing it with a NORMAL one, but if it is not done quickly, the fluid will leak, so cleaning is essential, including removal of oil.
How was your experience with it?
Check for leaks etc. is still to be done, but it was tightened as Exactly.
I think it looks beautiful and is good for dress-up.
[Included Parts:were they on?
There are no other Included Parts:.
[Was there anything that disappointed you?
If you look closely, you can see what looks like processing marks, but it is not a Level you need to worry about. If I may say so, it may be a little expensive considering that NORMAL is about 600 yen for Steel.
▼ Considering that the OEMBolt rusted out after less than 2 years of new purchase, I think it is a PARTS that should have been put on from the beginning.
View detail
![[NISSIN Repair Parts For Caliper] Air Breather](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0101/1758066_1_TS.jpg)
I think it is consumable.
This is a Repair Parts category, but is replaced at the frequency of wear and tear.
The frequency of oil replacement is lower than that of engine oil, but it is the same as the drain bolt, so we recommend replacing the oil if you are concerned about it. OEM Parts is reliable.
View detail
For Gail SPEED MASTER
Bolt was replaced before it rusted.
I think it is cheap for a Titaniumium Bolt
I'm satisfied
View detail
Upgrade that old rusty bleeder screw
When looking at my motorcycle to see what was required to upgrade my front brake lines. Noticed the old front brake caliper bleeder screw was rusty and leaking. So added one of these to the order to swap it out while the brakes were apart. Much nicer fit and finish then the old OEM steel one and do not have to worry about it rusting again. Pricey but to be expected for this material. Straight forward installation just remember not to over torque it at the completion of your maintenance. View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
I like the look of Stainless Steel
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValve
It is made of stainless steel and looks great
I don't know if seal tape is necessary, but just in case
View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street), その他 For import type calipers (BREMBO [Brembo] common for racing and street)
Shorter than OEM, but no problem
i installed it on my bremboRCSRadial master
it's shorter in length than the brembo OEM, but the only thing shorter is the top half, so it's not a problem for use
The 10mm Wrench is useful because you can use it (OEM is 11mm Wrench)
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
Hobby Party
No functional problems
It's a hobby to change from OEM as it's not used very often
The front brake is compatible
I installed it on a non-compliant rear brake for a test run, but the Fluid leaked
The OEM has one hole on the Caliper side and this Parts has two
The holes for air venting are also large
Installation is easy because it is only replaceable, and the Cap is attached to the OEMParts as it is It is available
View detail
Self-satisfied
I bought it because Nisshin's Rajpon and Screw Pitch are the same
But when I rubber cap it, I can't see it at all!
It was just an expensive but self-satisfying Custom, who knows?
View detail
Will be installed in W650's OEM Caliper
My wife's W650, Front's OEM Caliper, so it's an M8, Pt 1.25 of this Air You need a breeder
The OEM Bleeder Bolt is corrosive
After removing the air, I use the Tissue as a guide to suck up the remaining Fluid in the hole It will eventually corrode
If that happens, you won't be able to pull the Air out, so replace it before that happens
View detail
To vent the air in Thermostat
When I drained the air from the OEM Thermostat, I got Rust's boiling water mixed in at first Things have come up
Something bothered me, so I took it off and the hole in the air extractor is corroded!
I dipped it in a chemical solution, cleaned it and installed it, but it will probably rust again, so it won't rust I bought this in Titanium alloy gold wood
Clutch, front master cylinder and front caliper The Bleeder Bolt has been replaced with this 64Titanium, but the Rear Only OEM Caliper's AirBleeder Bolt is still OEM, so we'll see Replacement
View detail
High precision
For brembo new Crab 34, NORMAL's BreederValve is head 11 mm or 7 / 16in. The size of nice Size, in addition, because it is brittle and heavy made of iron, it is lightweight about 5 Gram per piece, but I think that the real value of this item is the hardness, high rigidity due to Material, plus the processing precision , The feeling of being tightened after bleeding and the feeling of security are not compare with NORMAL's Breeder, as long as the head is 10 mm. View detail
Apply brembo
Material until Breeder this time : I did not plan to turn it into a Titanium product but another Titanium Bolt from Jita ... Nut I saw it in the eyes and hurriedly purchased
I was glad I could buy it from the conclusion
Well, thanks to this Breeder, I also exchanged the Brake line comprehensively My self satisfaction is 5 stars
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rusty, bye bye ♪
We exchanged from OEM Parts Number during Maintenance of Commuter Scooter.
I checked the number of Air breeder, OEM Parts Number for Nisshin caliper and purchased it.
As described in the manual, I rolled around the Seal tape for about a half turn and installed it.
Combined with Stainless Steel Pad Pin, it is quite nice condition.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
To improve Maintenance.
We will also exchange Air breeder according to Brake fluid exchange.
I confirmed ProductNo in the Parts List and confirmed its compatibility with this product and ordered it.
Roll Seal tape and install.
Maintenance will be dramatically improved with this.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Design is also well satisfied
I bought Yamaha OEM 's Brembo caliper at Oakushon,
I decided to introduce it because I did not want to use Bolt rusted everywhere as good as the condition.
Since it seems that Pitch is not definitely determined, such as Manufacturer OEM Product or not,
It is more safe to check the diameter before buying before purchasing.
Even without Vernier calipers Screw Mountain Quantity : 5pcs. It can be determined sufficiently if Length of minutes is 6 mm or more or 5 mm.
I also get an impression of a little value, but there is a notch and the design is stiff,
Because it is SUS, there is no anxiety to rust and it may be just right price considering riding for a long time.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rust resistant Material : Stainless Steel
At Restore, the OEMBreeder was rusted and replaced.
OEM seems to rust soon so if it is Stainless Steel it will not rust.
The appearance is also the unique shine of Stainless Steel, the Motorcycle also looks shiny.
KATANA also wants to exchange it for kore when exchanging Brake fluid
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rust and keep dirty
I replaced it from OEM at Timing of Fluid replacement.
OEM that I was using for many years blew up powder and got dirt burned and it did not become beautiful even if I polished, so I refreshed it.
OEM's Rubber was just Size.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Fast deliver and good packaging. Replace those rusty and corroded original caliper bleeders. Good product to invest in
Fast deliver and good packaging. Replace those rusty and corroded original caliper bleeders. Good product to invest in View detail