Reviews
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
I looked at it in comparison. Both
I tried both Slip-on lineCarbon and Slip-on lineTruck di.
There is also a powerful low-speed Torque. Carbon, on the other hand, is a little slower at low speeds, but it seems to accelerate faster up to high rpm.
I will do so. This is a personal opinion, so you can choose by Design
I think. I think the performance of both is excellent.
View detail
To reduce volume
I have an AKRAPOVIC Silencer on my car, but I think it is too loud and I would be stopped by the police if I were to ride on the street.
I was looking for a variety of baffles, but AKRAPOVIC's Silencer has a special outlet shape, so I could not use a common universal baffle at all, and I had to use an OEM baffle. But since I bought AKRAPOVIC for the first time, I didn't know much about models and models, so I looked for a baffle that fits with the shape of the Silencer, and ended up buying a different product.
The appearance is the same, but the exit size is different depending on the car model, so the one for S1000RR cannot be inserted here. This was indeed a lack of confirmation on my part.
Please take note of this if you are considering AKRAPOVIC's Baffle.
There are subtle differences, so if you get it wrong, you won't be able to install it.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quieter than OEM?
I replaced the Slip-on lineCarbon Exhaust with the Slip-on lineTruck exhaust and actually ran the engine at full power. I wonder why this exhaust system is not JMCA or Japan Government Certificated. Why is it that the volume is the same etc. as the standard value, but only for motorcycles?
I wonder why you are so strict on Exhaust System. Even though there is no regulation for cars, except for the volume, when the Exhaust System is replaced!
View detail
Fits: HONDA CB250R, HONDA CB300R, HONDA CB300R
What's that? It's on. Sweat.
Today, we temporarily installed the muffler. After much deliberation, we decided to go with the Acrabo muffler.
I really wanted a government-approved muffler with a reasonably good sound.
I don't like the shape of it, but I like the shape of the Aklab, it's perfect, but the sound is... sweaty.
I bought it because I thought it would be a good time to break it in after the break-in period.
Shipped 3 days later... sweat.
I had some time today, so I did a temporary attachment.
My CB250R is an 8BK, and this muffler is an impression of the 2BK muffler up to '21. The 8BK also has a 2BK exhaust manifold and slip-ons.
I knew it would be attached, but I thought that 2BK slip-ons would not be attached to the 8BKOEM exhaust manifold.
I was thinking about it. (I had heard some impressions that the 2BK Moriwaki exhaust manifold did not fit the 8BKOEM muffler.)
I was going to buy a 2BK exhaust manifold if it didn't come with this aclab.
because of ...
What? It's attached. Of course, it's not broken in yet, so it's a temporary installation. The exhaust manifold is not banded yet.
But it's like there's nothing to resist. It feels normal.
And when I put it on, I'm still concerned about the sound.
It was a blast, I felt it was like a Harley with a modified muffler.
I would like to remove the baffles and modify the sound deadening system.
I don't like the sound to be too Large... sweat.
For now, it's just a temporary installation today, so when the break-in is over and it's time to put it on for real, we'll do it.
I would like to make an impression to see if there are any obstacles.
I'm sure you have your preferences, but the sound is a blast. sweat
View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
It's easy
Heat Guard installed, took me a while to figure it out because of the orientation of the Band. Please see the pictures. View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
The contents are unknown, so I will Up.
I purchased the carbon heat guard because I needed it.
[Contents] but since it is unknown, I will provide a photo of it before installation.
1.Band Quantity:2pc. Set
2.Bracket Quantity:2pc. Set
3.Bolt Quantity:2pc. Set
4.RubberWasher 4 pcs.
5.Carbon heat guardBody
6.Instruction Manual for English Version
This band can be installed with the Exhaust System installed.
Therefore, the exhaust system will not be pulled out during the process of installing the Heat Guard.
The band is fully loosened and threaded through the bracket.
The rest of the time, Heat Guard is used with Bolt and RubberWasher.
Tighten.
CBR1000RR-R with Slip-on lineTruck di
So, I will install this product.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
The identity of the servo can seraer.
I could not figure out what the servo can seraer.
The object in the photo appears to be adding resistance to the servo.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quiet Powerful feeling
From AXIS Labs' Slip-on SilencerCarbon
Spec. changed to Slip-on lineTruck di.
The Carbon has a pipe diameter of just over 50mm, and the Truckdi has a pipe diameter of about 60mm.
The latter is quieter and more powerful.
Heat Guard will be attached separately.
Exhaust System band should be a little cheaper to tighten.
View detail
AKRAPOVIC Heat shield
The AKRAPOVIC Racing Line Full Exhaust System is a must have. Of course, the heat shield effect is also perfect. It is a little expensive, but I am very satisfied with it. View detail
Unintentionally smiling
Purchased OEM Exhaust System because I liked its SIDE-out style.
There were also Megaphone from AXIS La and CRT from SC, but I chose this one that seemed to produce as much bass as possible.
Installation is easy, just remove the bolt and apply the EXUP.
The exhaust sound is more bass than I expected and Large satisfied!
The volume is just right, not too loud with Large satisfaction.
I had heard that the R6 Slip-on Silencer was not different from OEM and Large due to the Bento Box, but personally I had the impression that it was quite different!
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
quintessential AXIS Lapo, good sound
When the Valve is opened with the OEM Exhaust System, the sound is just too noisy and it is like a cracked sound. The sound is a bit louder than the OEM Exhaust System, but once warmed up, it is not that loud. Fat and nice sound.
If you've got Engine on you in a residential area, you should leave immediately.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
quintessential AXIS Lapo, good sound
When the Valve is opened with the OEM Exhaust System, the sound is just too noisy and it is like a cracked sound. The sound is a bit louder than the OEM Exhaust System, but once warmed up, it is not that loud. Fat and nice sound.
If you've got Engine on you in a residential area, you should leave immediately.
The instruction manual is in English version, but the Torque is included, so there is no problem if you follow the instructions as shown in the picture. There was a liquid gasket in the box, but I did not use it this time because I had already bought one. The installation requires Torque, so be careful.
View detail
![[Repair / Optional Parts] Silencer Bracket](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0251/24232620_1_TS.jpg)
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
For weight reduction
I never tandem with RR-R, so I installed this one to save weight, and it is compatible with both Normal muffler and Slip-on Silencer. I installed Babyface racing hooks with it and had no problem. The quality of AXIS Lapo is the best. View detail
With a NORMAL catalyst, don't expect any sound.
CROSSPlainSound will fill you up if you replace it with Link pipe, but ecuSetting is a must.
In front of your home, you should keep in mind that you should drive away the moment you hit the Engine.
View detail
Fits: KAWASAKI NINJA250, KAWASAKI Z400, KAWASAKI NINJA400
ninja400 (2020 MODEL) wearing
I am very happy with the bass, which is good compared to OEM. View detail
I know it when I see it?
I felt the ministry was of higher quality than what I had been using. View detail
General Gasket but expensive anyway
As per the Title, the price used to be in the 5000 yen range, but the price has risen to the 6000 yen range, perhaps due to the recent depreciation of the yen. We have no choice but to buy it because there are no alternatives from other manufacturers, but we would like you to set the price more in consideration of users. View detail
Design is perfect!
I am satisfied with the appearance and exhaust sound.
I feel that the low speed Torque has dropped a bit because of the good disconnect.
View detail
Fits: HONDA CRF, Others , SUZUKI RM-Z250, KAWASAKI KX250
Installation of AKRAPOVIC Exhaust Spring
[How is it used?
for Repair.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy with a dedicated purchase.
How was your experience with it?
Very good
[Included Parts:were they on?
Included Parts:are not included.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Product quality is the quintessential AXIS Rapo
Was the one you received as per Image?
It was no different from the photos shown on the website.
Was the installation difficult?
Installation on the S1000RR is very easy.
Bolt touched during installation and removal is Quantity:2pc only.
Bracket, tightening Band only.
Note that both are Torx bolt.
The installation instruction manual is the English version, but the Torque indication is also shown,
The picture alone is enough to understand Level.
It can be replaced by the OEM in less than 10 minutes.
How was your experience with it?
The Exhaust System is very light compared to OEM.
Since the overall length is shortened at once, there is a considerable sense of change.
To be honest, I couldn't tell much about the sound. The shorter it is, the closer it is to me.
The sound may be a bit larger than the original. However, since it is only a Slip-on Silencer, it is not a standard OEM silencer.
The catalyst is working well, so we do not expect to hear any explosions.
In AXIS Rapo Data, the OEM is 98db and 100db for this product.
Honeycomb shape of Exhaust System exit is cool.
Also, because it is made of titanium, the color of the honeycomb part changes as it is heated.
The quality of the product itself is quintessential AXIS Lapo, very clean and perfectly positioned for installation.
Pipe cuts are also well processed, and this area differs from SCPROject and Largekiku.
[Included Parts:were they on?
Installation Instruction Manual, for installation with Exclusive Bolt
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail