Reviews
rebel 1100 dct
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed.
It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only.
It's a pity that the part needs to be processed ------------------------------------------ ---------------- It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. It's perfect for the Rebel 1100 handlebar. It was installed well and tuning was smooth. The delivery and process were perfect. However, it's not for the Honda Rebel 1100 only. It's a pity that the part needs to be processed. Powered by Google Translator
View detail
Beautiful lights
The lights feel and look beautiful and visibility is improved!
As for the price, I personally think it would have been easier to afford if it were a little cheaper.
View detail
Purchased for dropout prevention
M8Nut is used to fix a self-made Handlebar, but there is a possibility that an ordinary nut may loosen, so we purchased a lock nut that does not loosen.
Bolt used a hand-held anti-theft Bolt, which was both anti-theft and dropout-proof.
I would buy again if the opportunity arises.
View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Posh LED taillight
The taillight arrived within a week of ordering which is great, the fitting was straight forward using all the original brackets and screws,the plug was a direct fit to the original connector,great product very happy. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX1300R
I'm glad I went with Gold.
I used to use middle weight, but the numbness in my hands did not decrease so much, so I decided to use heavy weight this time. I hope you will experience some vibration this time! View detail
Was good
The product arrived quickly because I was out of bulbs. View detail
Small size is the reason for rust resistanceMaterial:Stainless Steel Screw!
[How is it used?
Replaced the brake hose guide with an external aluminum guide.:Replaced with Stainless Steel.
Was the one you received as per Image?
It is as accurate and clean as the Image.
Was the installation difficult?
Easy installation by simply replacing it.
How was your experience with it?
It can be used without worrying about Rust.
[Included Parts:were they on?
Screw only, nothing else is included.
[Was there anything that disappointed you?
Not particularly
▼Quantity since wdisc.:Pair (for Left and Right) Four bottles are required in the following table.
View detail
The price is ….
It looks cool, but as with all RS parts, the price is too high! View detail
Fits: KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI NINJA650, KAWASAKI NINJA650R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZX-7R, KAWASAKI ZX-9R, KAWASAKI ZX14R, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZZR1400
For NINJA400R
Replaced from NINJA400R OEMBar End.
It is considerably heavier than OEM, so I expect it to reduce vibration when touring or driving at high speeds:??
View detail
Honda4MINIDrum brake with Exactly!
[How is it used?
It was used for One point of Rear brake of Benly50CD50.
Since we use Gold parts frequently, we chose Gold as the color.
Was the one you received as per Image?
Pale gold, not obnoxious, and Beauty.
I think the quality is good for the price.
Was the installation difficult?
We were able to replace it without any particular difficulty.
How was your experience with it?
The functionality of the system is fine and faultless.
The dress-up effect should be casual.
[Included Parts:were they on?
Nothing else is included except parts.
[Was there anything that disappointed you?
Nothing in particular, changing Arm to Aluminum is cheap, but if you only replace this part, it's not cheap and looks better.
The lineup is abundant and comes in a variety of colors, so you can dress-up your car to match!
View detail
Poor return of Engine Starter Motor
After a year and a half of use, the return of the Engine Starter Motor was poor and the CellMotor kept turning.
The same thing is written in the review of KIJIMA's Engine Stop Switch, so things seem to be the same.
For now, I did a Silicon spray and it came back, but I'm sure it will reappear after a while.
It is inexpensive, so let's just use it as such. (Laughter)
View detail
the best dress-up item
It's the best dress-up with a long tail. The archi product is too expensive and large, but it shows the right price and size. There are no problems with visibility and brightness. View detail
bright
I think it is more crisp and clear than OEM. View detail
To replace genuine products
The original gear change lever has rubber rolled up in a roll shape, but since I frequently change gears, the front rubber often rattles, so I purchased a POSH product. I like the design of the genuine product more, but I like that this product comes in 2PCS. -------------------------------------------------- -------- The original gear change lever has rubber rolled up in a roll shape, but since I frequently change gears, the front rubber often rattles, so I purchased a product made by POSH. I like the design of the genuine product more, but I like that this product comes in 2PCS. Powered by Google Translator View detail
Easy TankStar
I have been interested in this one for a while with the installation of the Bikini cowl.
The bending process does not appear to change the tint much unless it is carefully and aggressively Tensioned.
The OEM bolt was not long enough, so we had to make do with what we had.
View detail
More Classical
I replaced it with a new one that I thought would fit SR400.
It is secured with a single Plus screw, but it is aligned with the outside of the OEM's two Screw holes.
View detail
Fits: HONDA CB1100, HONDA X4, HONDA LD 97-03, HONDA CB1300SUPERTouring, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
Posh sprocket cover
The cover was delivered very well packaged,after unpacking it you could tell it was well made and good quality,fitting this item took 45mins from start to finish and it looks great View detail
Anyway, it's bright.
I think this abalone-type Tail lamp is good and crisp, although I can tell that NORMAL is so-so with Brake applied. View detail
For vehicle inspection.
[How is it used?
I purchased this product because another LED taillight was indicated to have insufficient area to pass the bb1 inspection.
Was the installation difficult?
For RaceCowl, the addition of a Holder and Bracket was necessary. The installation itself is simply a matter of fastening two bolts to a homemade Holder.
How was your experience with it?
The car passed inspection with no problems. The LEDs from License Plate Light are bright enough for the tail lights and Brake lights.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Tandem seatBelt cover
I chose gold for the Seat cover because I have a uniform color of gold. I like the texture and the high quality feel of the cover. View detail