【POSH】Billet Master Tank Bracket Review

Freedom. Hence the jumping difficulty level.

[How is it used?
Front Brake Fluid Tank for a YZF-R6 2016 (13S)
Tank is KawasakiOEM Parts (https://www.webike.net/sd/21984592/)
Fluid is Active's 4.0 or 5.1. Up to the capacity near the MAXLevel.
It should be about 6 years and a little over 60,000 km.
Bent at a rather aggressive angle, like a Landolt ring

Was the one you received as per Image?
The product is exactly as shown in the picture, with simple packaging and contents.

Was the installation difficult?
The installation itself is M6 BoltQuantity:Easy to remove and insert 2pcs.
The product can be bent freely and is designed to be used bent, but it is hard and requires a lot of strength or wisdom.
・Quantity:Pair (for Left and Right) However, if you bend them all at once, the surface will crack in no time and the color of the silver-colored material inside will become visible. The surface cracks in no time, and the color of the silver-colored material inside becomes visible.

How was your experience with it?
Although it was made of aluminum, it was robust enough to support a tank with Fluid up to near MAXLevel.
Although the surface area was torn up during the installation process, the original blue color of the intact areas has not faded, so it appears to be resistant to sunlight.

[Included Parts:were they on?
It is not attached at all. Compared to the flat Bracket, the Bolt may need to be changed to a longer one because of the thickness of the mounting area.

[Was there anything that disappointed you?
No, because the weight has not caused the bending to come down even if it is no-brown.
The surface can be easily roughened by bending with a tool, so the "Large is tough enough" mentality cannot be tolerated. As the product notes, if you want to bend it, it would be better to bend it carefully with bare hands or something, so that it can be installed with its beautiful appearance.


Even if the surface is damaged due to unbrowned bending, the performance as a bracket to support the tank remains and is reliable.
However Bending that preserves beauty." The degree of difficulty of the "Bend" is high and requires delicacy and care. In addition, since it can be bent freely, it is necessary to have Sense to be able to image how to bend and attach it in the best way. View detail

Brake Circulation Custom2

Billet Master Tank BracketBecause a straight tank bracket is not enough, we bent it into an arched shape.
Material:It is aluminum, so it was surprisingly solid and after installing it, I thought it would have been better to change the color other than Black. View detail

phantasmagoric

The color is Gold, but it bends easily with little color loss when bent. View detail

Front brakes master has been replaced.

Since I had replaced the front brakes master, I was looking for something to mount the reservoir tank without a bracket and decided on this.
It is good because the mounting position and angle can be freely decided. View detail

Billet Master Tank Bracket

[How is it used?
good
Was the one you received as per Image?
be neat (e.g. of a room)
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail