Reviews
There is a sense of security dedicated to the car model.
DL1000 V-STROM650XT ('22) The product has been installed in a
It will be used in conjunction with Hepco&Becker's Engine Guard,
The bracket of the Radiator part was a little bit hit by the Guard,
The installation was only a little difficult, but it was almost interference-free. I think there may be individual differences, so this is just for reference.
Because the connection between the Fog Lamp and the included Harness was a Flat Terminal,
We changed to WaterproofCoupler just in case.
The brightness is sufficient for an auxiliary light,
Cutline is also solid, so I don't think it will bother oncoming traffic.
Considering the price, the texture might be a bit lacking,
If you are concerned about this, you should consider another product.
View detail
A quality low-profile blinker kit
The kit I purchased was well packaged and tailored for installation on a V-Strom 650. All parts appear to be good quality and ready for immediate installation on the bike. The kit includes wiring adapters to suit the bike (bullet connector to 2-pin Suzuki connector) and a new 7-pin LED blinker relay. Installation was easy for someone with moderate experience. Tools required: open-end wrenches (8~12mm), hex key wrenches (4~5mm), 10~12mm socket. The rear fender of the bike must be removed to access the wiring and remove the existing blinkers. Routing the wiring through the adapter plates, washer and nut requires patience and a delicate touch. Aside from that, it's a matter of securing connections with electrical tape and securing the wiring to the frame. The kit is quite bright and very visible, even during the daytime. The blinkers are all mounted on flexible stalks, so they should survive if the bike is dropped. Overall, I am very pleased with the purchase. View detail
Fits: KAWASAKI KLX650SR, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-03, YAMAHA MT-25, HONDA FTR250, HONDA CRM125, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, HONDA CBR500R, HONDA Rebel300
I like the chain
I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. -------------------------------------------------- -------- I purchased it on the recommendation of a motorcycle friend at the same meeting. I replaced the chain last year and have been using it for 10 months. Compared to the existing factory chain, the shifting is smooth and the direct connection is very good. I chose silver as the color and it looks very clean, so I feel refreshed every time I drive. Powered by Google Translator View detail
Fits: HYOSUNG GT 650 COMET R, HYOSUNG GT 650 COMET S, HYOSUNG GT 650 COMET, TRIUMPH TIGER 800 XRX ABS, TRIUMPH TIGER 900 RALLY, TRIUMPH TIGER 800 XRT ABS, TRIUMPH TIGER 800 XCX ABS, TRIUMPH TIGER 800 XR ABS, TRIUMPH TIGER 800 XCA ABS, TRIUMPH TIGER 800 XC ABS, TRIUMPH TIGER 800 ABS, TRIUMPH TIGER 800 XC, TRIUMPH TIGER 800, TRIUMPH STREET TRIPLE 765 RS ABS, TRIUMPH STREET TRIPLE 765 S ABS, TRIUMPH STREET TRIPLE 765 R ABS, TRIUMPH STREET TRIPLE 675 R ABS, TRIUMPH STREET TRIPLE 675 ABS, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675
Genuine JT Sprockets 14t Front Sprocket for Suzuki SV 650 ABS 2008
This bike came in for a service and a new chain and sprockets fitting. This was purchased along with the rear sprocket just for the job. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the similar price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
Fits: YAMAHA TRACER9 GT, YAMAHA FAZER8, HONDA VTR1000SP-1, HONDA CB400SF, HONDA CB400SB, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, SUZUKI BANDIT1250, KAWASAKI VULCAN S, SUZUKI BANDIT1250 S, SUZUKI BANDIT1250 F, SUZUKI BANDIT1200, SUZUKI BANDIT1200 S, SUZUKI SV1000 S, SUZUKI V-STROM1000, SUZUKI SV1000, SUZUKI KATANA, SUZUKI GSX-S750
Kagoshima Touring for 1,600 km
Saganoseki→Aso→Takachiho→Cape Sata→Nichinan and Kyushu Touring 1600 km or so, no problem! View detail
Vstrom under cowl
The product is packed well and shipped on time. There are no damage. The item is original and it is plug and play on my sv650 for added protection. Complete accessories View detail
Fits: Others , SUZUKI V STROM 650
Easy to install
Model:YZF-R25
I was about to buy Repair/Option Parts, but changed my order because Body was on sale for less. I have used it before to reduce vibration on a single cylinder and I am using it on my R25. Recently, I have been trying to increase or decrease the weight because I am concerned about the vibration, and when I made it heavier than 350g, my whole arm went numb, so now I am going to try 300g.
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM650XT
Very good OEM parts, but...
good point
Can be attached to any machine equipped with a P511 Engine.
I installed it on my current model SV650.
Although it is called "Under Cowl", there is almost no cowl part at the bottom, so it does not interfere with oil changes and other operations.
After assembly, the unit can be detached simply by removing the four Bolts on the SIDE, without compromising serviceability.
The design of the V-Engine is very good, but it has a look that compensates for the scuffiness of the underbody, which is common in V-Engines.
Cheaper than a bad Under Cowl*, less than 23,000 yen at the time of my purchase.
All of the installation brackets and instruction manuals are in quantity.:It is available in Set, and there is no need to worry when installing it.
OEM products are made with fitting in mind, so you don't have to worry about fitting.
A bad point
The product is originally designed for DL1000 V-STROM650, so it has the DL1000 V-STROM Logo on it.
I'm thinking of making a Sticker and posting it above.
From a distance or in a photo, it looks good, but at close range, there is a surprisingly large gap in the cowl, which makes it look scanty.
Even if it is a Cowl, some stores may charge a Cowl-equipped car labor fee for the work.
Instruction Manual is in English Version for some reason. (Well, if you know anything about maintenance or DIY, you don't need to read the English version to understand the contents...)
Some Bolts need to be removed with T30 when installing, so preparation of Socket, etc. is necessary.
I wrote that there is no cowl at the bottom in a good point, but it is not suitable for Circuit Running because there is no cowl at the bottom.
*Under Cowl in Circuit would have had an Oil-receiving role, but in this Cowl...
I have written a fair amount about the bad points,
Personally, I give this product almost a perfect score.
If I had to say, I would have said Cowl without Logo...
View detail
Fits: SUZUKI V-Strom 650 ABS, SUZUKI V-Strom 650 ABS, SUZUKI V-Strom250 ABS (DL1000 V-STROM), SUZUKI V-Strom250, SUZUKI V-Strom1000 ABS (DL1000 V-STROM), SUZUKI V-Strom1000 ABS, SUZUKI TL1000, SUZUKI SV650X ABS, SUZUKI SV650X ABS, SUZUKI SV650 ABS, SUZUKI SV650 ABS, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400, SUZUKI SV1000, SUZUKI SKY WAVE 650LX (SKYWAVE), SUZUKI SKY WAVE 650LX (SKYWAVE), SUZUKI SKY WAVE 650, SUZUKI SKY WAVE 650, SUZUKI GSR250
Cost-effective
[How is it used?
GSX1300R HAYABUSA has finished breaking-in and both Oil and Filter were replaced by Self.
Well, for domestic cars, there is no need to bother buying OEM. The ones that can be interchangeable are cheap and of good quality, as each Manufacturer produces them.
In this case, we chose this one made by NTB.
Since they are so inexpensive, Filters are almost the same whether they are expensive or inexpensive, so as long as they fit, there is no problem.
Was the one you received as per Image?
that's so, isn't it
As per Image
The box is solid and we plan to throw away the removed Filter in the box as is.
Is the product itself the same as the OEM? The product itself is similar enough to be the same as the OEM?
Was the installation difficult?
In the case of the GSX1300R HAYABUSA, the side cowl needs to be removed, which may be a bit of a hassle.
It is easy to remove the filter itself, and the installation position is within easy reach, so it is not particularly difficult, but be careful of the exhaust pipe below! Don't get stuck!
How was your experience with it?
I think it is the same as OEM. I plan to replace it again next time at 6000 km.
I'll do another imprementation at that time and we'll see how it goes once it's done.
[Included Parts:were they on?
No - you will need to have a tool to remove the filter.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
When you throw away the Filter, please follow the rules of the local government!
Incidentally, the tightening Torque of the Filter; 20 N-m
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX250R, SUZUKI DL1000 V-STROM650, Others , DUCATI 1098, DUCATI 1198, DUCATI 748, DUCATI 749, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 999, DUCATI DIAVEL, DUCATI GT1000, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER S2R, DUCATI MONSTER S4R
good buy
The size fits perfectly and it's a good product. View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Easy to use
Easy to grip and use
It looks cool and perfect!
View detail
Fits: SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI GLADIUS650400, SUZUKI GSX-S1000F, SUZUKI SV650, SUZUKI V-STROAM250, SUZUKI GSX-S1000, SUZUKI GSX-S1000S, SUZUKI V-STROAM, SUZUKI BURGMAN400, SUZUKI GSX250R, SUZUKI V-STROAM650XT, SUZUKI V-STROAM1050XT, SUZUKI V-STROAM650, SUZUKI V-STROAM1050DE, SUZUKI V-STROAM1050, SUZUKI GSX-S1000GT
Atmosphere changed.
Since I changed the Handlebar, I also changed the Bar End. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Fits: YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X-SR, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SBasic, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, YAMAHA TMAX500, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA Axis Treat, YAMAHA N-MAX, YAMAHA N-MAX, YAMAHA MAXAM, YAMAHA MAJESTY250, YAMAHA JOG125, YAMAHA GRAND MAJESTY250, YAMAHA GRAND MAJESTY400, YAMAHA
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
Fits: SUZUKI GSX-S750, YAMAHA YZF-R6, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XSR700, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZR400, YAMAHA FZ8, YAMAHA FZ8, TRIUMPH TT600 (TRIUMPH), TRIUMPH TIGER800XC, TRIUMPH TIGER800
DID for peace of mind
Because OEMChain is Steel as it is, it becomes dirty soon, it exchanges it though it is still less than 2000 km.
My previous Motorcycle also DID use VZM-X,
I liked it so much that I decided to go with its successor MODEL VZM-X2 in Repeat.
We also replaced the Sprocket with a new one, which looks better and Large is satisfied with the new look.
View detail
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, HONDA FTR250, HONDA CRM125, HONDA 400X, HONDA 400X, HONDA AX-1, HONDA CB223S
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Fits: HONDA CRF450RX, HONDA CRF450L, HONDA CRF250M, HONDA CBR400R, HONDA CBR250RR, HONDA CB250R, HONDA 400X, HONDA 400X, KAWASAKI Z250, KAWASAKI Z650, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja 650, KAWASAKI KLX230, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, SUZUKI SV650X
How it feels to use Daido vx3Silver chain on NINJA2 Helmet50Rr
It is a very nice Chain that fits NINJA2 Helmet 50Rr effectively. The Silver finish is rust free and will fit any color of body. View detail
Fits: DUCATI 998S, DUCATI 998S, DUCATI SPORT1000, KAWASAKI NINJA H2, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR400R, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CBR400F, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB500 ( S ) 01-05, HONDA CB600F, HONDA CB600F, HONDA CB650F, HONDA CB750, HONDA CBF500
Everything arrived on time, I'm happy with the parts. I ordered a chain, the quality is excellent. Thank you.
My long-awaited purchase, the DID VR46 chain has been in my sights for a very long time. Vestb goods arrived on time. I am satisfied with the product, the quality is excellent. -------------------------------------------------- -------- My long-awaited purchase, the DID VR46 chain has been in my sights for a very long time. Vestb goods arrived on time. I am satisfied with the product, the quality is excellent. Powered by Google Translator View detail