Reviews
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Nice upgrade
They will fit. They fit in the factory perches as good as the factory levers, and do fit behind the factory handguards with plenty of clearance. They are a well made product. Best levers I've ever owned. Crashed multiple times in hard pack, and soft conditions. They haven't even deformed. Will purchase for every dirtbike I own moving forward. View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Unbreakable Lever
I installed it on my gasgas EC250 which I always use for forest road touring.
With the NORMAL Lever, the supplemental grip was not comfortable, so I purchased this Lever.
As a result, the grip is improved and Lever is easier to operate.
It is also foldable, which makes it difficult for the lever to break, and reduces the number of problems when touring on forest roads.
The quality is very good and Parenthesis good Lever.
However, the price is very high, so the cosmetics are not very good.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Good product but shorter than I expected.
I like both the detailing and the look of the product.
But is 4Finger better for me?
It is about 2 or 5 Finger long when I hold it.
View detail
Good finish and feel
I used to use a flight lever on my 10R, but it has no adjustment mechanism and tires me out after long distances.
So we introduced this product, which has a ratio change and adjustment mechanism.
The exterior is beautifully machined and finished, the design is pleasing, the bolts are all titanium, and there are hollow holes for cutting and wiring, and the pivot bearings are bearing and smooth.
The installation itself on the handlebar is easy, but it is necessary to cut the SwitchWiring and process the terminals.
When I measured the weight of the flight lever with a Spring scale, it was about 8.4 kg, and when I measured it with a ratio that emphasizes lightness, it was about 7.8 kg, and I hardly felt any change.
The distance adjustment is difficult to operate because the Screw is close to the Small play Dial, so I am not inclined to change it easily.
Set about halfway between the furthest and most recent Lever, the semi-clear range seemed a little wide, but not uncomfortably so.
The play adjustment was also click-adjustable in the OEM, but this product is light and one click is large, and the sleeves are long, so when attaching and detaching the cable, you have to pull with all your might to get it off.
The price is about half of the 50,000 yen price of other companies' products, and it is not cheap.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA V-MAX 1680, YAMAHA MT-01, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 S 97-14, KAWASAKI ZRX1200 R 97-14, KAWASAKI ZRX1100 S 97-14, KAWASAKI ZrX1200DAEG , YAMAHA XT1200ZE XTZ750 SUPERTENERE, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
Replace with Brake lever
Along with the brake lever replacement, the clutch lever was also replaced.
As with the Brake lever, we are pleased with the fine-tuning capability and the texture.
I would have also appreciated a lower price.
Basically, I am satisfied.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA V-MAX 1680, YAMAHA MT-01, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 S 97-14, KAWASAKI ZRX1200 R 97-14, KAWASAKI ZRX1100 S 97-14, KAWASAKI ZrX1200DAEG , YAMAHA XT1200ZE XTZ750 SUPERTENERE, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
Clutch is now easier to connect.
The clutch lever was also replaced along with the brake lever.
The Clutch felt far away, but after adjustment, it is now slightly closer and easier to operate.
Installation was easy, and the Brake and Clutch together could be replaced in 15 minutes.
Even if you should fall down, you can increase your chances of getting home on your own, since the Lever is a Spec. that collapses in the middle of the road.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000 R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI KATANA, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ1, YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ6 R, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ8 N
Improved appearance and feel of operation
Instruction Manual is included, but it is not very detailed, but it is not that difficult.
It looks better and the adjustments can be set more precisely, improving the feel of the operation.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-14R HiGrade, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14, Others
Nisshin's Radial master.
Installed on a ZrX1200R.
MASTER is Nisshin's Radial.
I am satisfied with the texture and appearance, but there is a little interference with the Passing switch when I hold the Clutch. I am considering modifying the Switch side in the future.
View detail
Fits: KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZX-12R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI VERSYS1000
I wonder if it's just looks.
I installed it because it looked cool when it was used in the 8 Endurance Machine and so on.
It doesn't have any adjustment mechanism or anything like that, so the feel is the same, and the cutting holes are rather poor to the touch.
Since it is Foldable, it will reduce the Risk of not being able to run on its own.
I am satisfied with the new look.
View detail
Fits: YAMAHA XT250X, KAWASAKI KDX125-250, YAMAHA XTZ125, YAMAHA YZ80/85, YAMAHA WR250R, YAMAHA XT250, YAMAHA TTR125LW, YAMAHA TTR250, YAMAHA WR250X, YAMAHA SEROW250, YAMAHA TTR125E, YAMAHA TRICKER, YAMAHA TTR125, SUZUKI RMX250S, YAMAHA SEROW225, KAWASAKI KLX250, YAMAHA DT230LANZA, SUZUKI RM85, SUZUKI RMX250R, SUZUKI RM125
Well machined lever
The machining and finish on this lever is excellent. I could not find any imperfections on it. It was rather difficult to determine comparability before I purchased it but I can confirm that the K type lever is compatable with the control boxes on a Yamaha XT250/Serrow 250. Overall I am pleased with the lever. The options for 4-finger levers are more limited than the 3-finger versions. For 4-finger you are limited to only silver from Zeta. This is a little disappointing since you can get their 3-finger levers in other colors for more customization. There are much less expensive options out there but I decided to give these Zetas a try. The feel of them is very nice and the action is smooth, but I am not sure if it is worth 2-3x as much as some of the other alternatives. The fact that Zeta sells replacement levers (the flat bar you grip) in case you bend them in a crash is nice and does help make up for that extra cost. Installation was simple much like replacing any clutch lever, just unbolt the existing one, reseat the clutch cable into the new lever, and bolt on the new one. Unfortunately for me, there was a lot of play in the clutch lever when installed (it wiggled a lot in the perch). In fairness I don't know if this is an issue with this lever or with my existing lever perch. I plan to install some brass washers (don't use plastic) to eliminate the gap between the lever and the perch which should improve the feel. Shipping was fast and the levers came secure in a standard blister packaging. No complaints ok that front. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000 R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI KATANA, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ1, YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ6 R, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ8 N
Clutch lever
The levers are solidly made. Amazing adjustability. It's like 35 clicks or something. Didn't even bother to count. Folds well. But there is one issue with it. The hole in the lever is very sharp and hurts my fingers. Very weird that thry made it that way. If it was more rounded it would have been much better. Overall it's good looking and works well. View detail
Fits: SUZUKI GSX-R1000, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA XJ6N, YAMAHA YZF-R1S, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, SUZUKI GSX-R600, YAMAHA FZ-07, YAMAHA MT-07, YAMAHA FZ-09, YAMAHA MT-09, YAMAHA MT-09SP, SUZUKI GSX-R750, SUZUKI GSX-R1000R
Nice feel compared to Brembo levers
This is a well finished product and good value for money compared to Brembo levers. Finish is very good with a nice light feel in use. I only marked it down one star due to it now being made in China. View detail
Fits: SUZUKI SV1000S, SUZUKI SV1000, SUZUKI TL1000R, SUZUKI GSX1400, SUZUKI GSX-R1000, SUZUKI GS1200SS, SUZUKI BANDIT1250F, SUZUKI BANDIT1250S, SUZUKI BANDIT1250, SUZUKI BANDIT1200F, SUZUKI BANDIT1200, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM1000
Peace of mind in the event of a fall
The product introduction screen shows that the lever is designed to release the load in a vertical or forward direction relative to the handlebar, so it can be used as a lever for the handlebar.
Even if it falls over, it is unlikely to interfere with Lever operation, providing peace of mind.
I think it is good that the lever's grip width can be adjusted so finely.
I was concerned that when I tried to move Lever in the vertical direction against the handlebar by loosening the inner bolt at the lever's movable point, assuming that it would fall over, it could not move as shown in the product introduction screen.
What actually happens to this vertical movement upon impact? If anyone understands this, please let me know.
Brake lever has the same comment.
View detail
Fits: HONDA CB1100, HONDA CBR1000RR, HONDA X4, HONDA VFR1200F, HONDA VFR800, HONDA VTR1000FVTR1000F FIRESTORM, HONDA CB1000R, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB1000 SF (Big One), HONDA CB1300SUPERTouring, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Finding a Lever is also a challenge
I was looking for an external lever for the VTRSP and it wasn't available for the year, so I looked for one from a car model that uses the same OEM lever.
Clutch is said to be OEM and heavy, but I don't think it will be light.
I exchanged it because I prefer a slim Lever.
I like it because it is easier to use than OEMLever.
The adjustment range of the dial is also very fine. The lever is located in a place where the dial can be adjusted, so it is easy to ride long distances.
View detail
Fits: SUZUKI GSX-R1000, YAMAHA FZ-1, YAMAHA FZ-1 FAZER, YAMAHA XJ6N, YAMAHA YZF-R1S, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, SUZUKI GSX-R600, YAMAHA FZ-07, YAMAHA MT-07, YAMAHA FZ-09, YAMAHA MT-09, YAMAHA MT-09SP, SUZUKI GSX-R750, SUZUKI GSX-R1000R
It's a classic
In fact, we had used the same one for the 2006 model of GSX-R1000 for the 2022 model of GSX-R1000R (as a result, it was common), but we did not like the rattling of the shaft due to age-related deterioration after 16 years of use, so we re-purchased it this time.
In the current Catalogue, the Titaniumium color was discontinued, so I had no choice but to purchase Black.
Although there were repair parts for the lever, there were no repair parts for the shaft, so we decided to purchase the entire unit.
I was not able to Repair Parts, so I have a low rating for Costa.
View detail
Liver Arm
The clutch side had a GALE SPEED lever, so we replaced it as is. The screw was a little difficult to insert, so I used a file to cut off the protruding part and installed it without any difficulty. I like it in my own way. View detail
Fits: KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, KAWASAKI KLR650, KAWASAKI D-TRACKER X
Test Ogawara
Test Ogawara View detail
Fits: SUZUKI DRZ400 S, SUZUKI DRZ400 SM, SUZUKI DR250R, SUZUKI DJEBEL250XC
Since it was likely to become obstructive on the occasion of hand guard attachment when it was a normal lever, it purchases. Appearance good is carried out by beautiful processing, and it is 縲? Fine regulation of grip width is also possible. S
Since it was likely to become obstructive on the occasion of hand guard attachment when it was a normal lever, it purchases.
Appearance good is carried out by beautiful processing, and it is 縲?
Fine regulation of grip width is also possible.
Safe also at the time of a fall, since a crease preventing function occurs.
When there was a function in which the power which grasps a clutch is assisted, in addition, it was good.
View detail
Fits: SUZUKI DRZ400 S, SUZUKI DRZ400 SM, SUZUKI DR250R, SUZUKI DJEBEL250XC
Although there is liking by people, texture and a feel are also quite good to be able to change the angle of a lever, without changing the play which I compare pure and regard as much good. It is regrettable not to be fastened unless a thin spanner ha
Although there is liking by people, texture and a feel are also quite good to be able to change the angle of a lever, without changing the play which I compare pure and regard as much good.
It is regrettable not to be fastened unless a thin spanner has a lock nut of the bolt which determines the angle of a lever depending on the angle of a lever.
They will be five stars if there is no it.
View detail
Fits: SUZUKI 250SB, KAWASAKI KLX250, KAWASAKI SUPER SHERPA, KAWASAKI D-TRACKER
Since the adjust function was attached, it exchanged. It can adjust to oneself liking and becomes easy to operate it, and an appearance parenthesis is good and admiration may come out custom.
Since the adjust function was attached, it exchanged.
It can adjust to oneself liking and becomes easy to operate it, and an appearance parenthesis is good and admiration may come out custom.
View detail