Reviews
Shoulder Protector is just right.
Waist 70cm.
I have a jacket with a protector, but it is a hard protector and it hurts my shoulders. This one is soft, so it doesn't hurt, and it looks neat.
View detail
If you are in the upper limit of leg circumference, please choose size L without hesitation.
I purchased the S/M Size although the above knee and below knee circumference dimensions were the upper limit.
As a result, the bottom edge hit my shin and hurt. However, this is a little Quantity:Pair (for Left and Right) The problem can be alleviated by shifting it to the
In the beginning Size Exchange However, I thought that the Merit is too large to fit in the ADV150 Helmet in, so I am using it as it is.
The part of the Others that touches the legs (worn over Chino pants) is not uncomfortable and there is nothing wrong with it.
There are several holes for airflow, so even in the Okinawan summer, heat was not an issue while driving.
What impressed me the most about the Large model is how easy it is to put on and take off, even though it is fastened securely. In addition, the tightening strength is constant, so I will never be able to go back to the Velcro method, which requires adjustment every time.
If, like me, your leg circumference is at the upper limit, I recommend that you go with the L size.
It may be a little expensive, but it is definitely very inexpensive if you consider the cost of treatment for shins and knees as an advance payment.
View detail
Looks effective.
Normally soft, hardens upon impact….
I tried it!
When I gouged it with something hard, it got hard!
The area is smaller than expected, but I believe that the acute areas are protected.
View detail
Large Scale
I bought it so that I can run in normal clothes, but it is too large to be used under a Jacket.
I'm all about sleeves.
I thought it was for use at the top of Jersey or Outer.
I thought it would be cheaper and better, so I went with Hard Type, but I guess I made a mistake.
Installation is simply by threading the arm through the Rubber, but the tightening adjustment of the Rubber is for Type, which adjusts the tightness of the Rubber using only the moving ring,
I wish it had a Velcro stop.
Also, the ends of the rubber are sewn on, so it would be a hassle to replace them when the rubber is ruined.
The Protector itself is quite tight, and if the Protector is tightened to the point that it does not Gap, the elbow will be fixed in place.
I got CE, but Level 1 would have been thinner.
View detail
SizeExactly
I usually wear a LSize jacket and this product looks just as good.
I am 169cm.61kg.
View detail
Purchased with Mesh Pants
Purchased as an Option for Mesh Pants.
We used it for DEGNER Pants, so naturally it was Exactly.
View detail
It's hotter than I thought it would be.
I bought the M size after reading the reviews. However, it is a little large and the elbow protector ends up on the tip of my elbow. If I force it to fit my elbows, I worry about the sagging of the fabric.
And the chest and Spine Protector are not Mesh, so the cold does not pass through. It is not cooler than I thought, it is hot.
However
The soft Protector is quite good for other Jacketsc.
View detail
Universal and easy to use.
I used the Protector for a Triumph Jacket I won at an auction because it did not come with a Protector.
It is for fall and winter, so it did not need to be Mesh, but it seems to be Universal and Quantity.:I will use it because it was an easy price to purchase in a set sale.
Probably it will be quite cool when combined with a mesh jacket.
It is not thick enough, but it is better than not wearing it at all.
The Largeness adjustment was easy to Cut with Scissors. The smell was a bit annoying, but tolerable.
After mounting on the Jacket, the Protector is not assertive, which is a good thing.
It would be nice to have a Punching type with holes as well as a Mesh type.
If Chest Protector is a Quantity:I think it is good to be able to choose according to need, since there seems to be a Set item as well.
View detail
Both my knee and my shin were fractured.
From spring to fall, it is very steamy, so if it does not fulfill the Protector's role, it is just a nuisance. View detail
Cost-effective! Knee protector
I bought it about 15 years ago. No Fear." The Knee protector strap of the "K" has been stretched and the fixation has become lax, so we are replacing it.
This is an imprement after several uses.
【good point】
Shock-absorbing pads are available for above-the-knee quantities.:Pair (for Left and Right) CalfQuantity:Pair (for Left and Right) Fit is good.
I think it has a high degree of protection.
Lightweight and easy to put on and take off.
Good cost performance.
What's not so great about it
None.
View detail
Almost satisfied
Was the one you received as per Image?
As per Image
[How did you feel about the Fit?
I am 173cm 65kg and bought a M. It feels just right.
The sleeves and length are long, so if you are about the same height but have a thin body, you may be able to get a S.
How was your experience with it?
I wore a quick-drying/breathable lightweight long-sleeved Under and a regular T-shirt on top!
Protector is unobtrusive, as expected.
You don't feel the Protector as much when you move your elbows and shoulders as you would expect.
[Was there anything that disappointed you?
Protector is heavier than I expected.
Therefore, the Protector on the back will feel droopy due to the fact that it is a StretchMaterial.
I think this is the reason I'm making it thinner.
Note that the weight of the Protector stretches the fabric, so it is not hung on the Hanger.
They sell breathability, but in the summer I think I'd wear 3 layers, which would make it less breathable.
Moreover, the undershirt and this product are in close contact with each other, so there is no air layer, and it feels even hotter.
I think a normal T-shirt + full mesh jacket would be cooler while running.
You can take off your jacket when you take a break.
What are the specs of the product, such as protector?
Most flexible I have ever used!
Chest has no Punching, so ventilation is poor.
View detail
OEM Product is required
We are using an Alpinestars Jacket with a Type that attaches the Protector with a Button.
At first, I tried to attach a Komine Protector, but it did not fit due to a difference in the standard of the button.
If you want to use Protector as an integral part of Jacket, you have no choice but to put this on.
The texture is high and has some breathability.
It is CE2 standard, which provides peace of mind.
View detail
Good value for money and performance
POD MXBody, first impressions. Thin! Light!" It was
The appearance is extremely slim, with little unevenness and a resisting appearance.
The plastic of the 3rd and 4th fixture is very flexible and fits along the thigh and shin, so there seems to be no worry about the knee brace moving on its own.
The inner pad is not made of cloth, but something like a urethane sponge, so it seems to be very easy to clean.
PODMX is Ligament." Because it is System, it moves more smoothly than the GEAR type and seems to SUPPORT the knee joint.
View detail
I should have used it sooner.
I broke many ribs in a Solo touring accident in July. Learning from my injury, I bought the Breast Pad for touring and it seems to work well for KUSHITANI and DFG. I should have bought it earlier. View detail
easy to move
I used to use the Hard Type inner protector, but the shoulder width became too tight and I wanted to use it in a more natural way, even though I knew it was safe and secure!
I was surprised to find that the material was soft and squishy when I received it, but when I tried it on and punched it, it softened the impact surprisingly well.
I like this inner protector because I can wear a thin shirt over it and it doesn't feel stiff and the material seems to be tear resistant!
View detail
Purchase for tandem
I knew the importance of the chest protector, but I bought it because it was not included in the Daytona mesh jacket I purchased this time. It's one size fits all, so it's a bit tight for a small size jacket. It is said that the tandem chair did not feel very uncomfortable. I recommend it. -------------------------------------------------- -------- I knew the importance of the chest guards, but this time I bought it because it was not included in the mesh jacket. The size is one size, so the small size jacket has a little tight feeling. It is recommended that Tendemja did not feel very uncomfortable. Powered by Google Translator View detail
Excellent wearing comfort
After purchasing Daytona's half mesh jacket, there was a back protector in the past, but I purchased this product in hopes of a higher specification protector. It has a slight weight, but the soft material does not lift or protrude out of clothes and fits well with the body, so it is comfortable to wear. -------------------------------------------------- -------- After purchasing Daytona's half-mesh jacket, there was a protector, but I bought it with this product in hope of a higher specification guard. It is slightly weight, but it is a soft material that does not pop out or pop out of the clothes, so it fits well with the body. Powered by Google Translator View detail
Knee brace Hinge cover
I purchased a knee brace and was looking for items to prevent the Pants from tearing and found this.
It is easy to remove and wash after use.
View detail
Solid
SimpsonNSW-2103 (Winter Jacket) I purchased this product to be installed in a
I was looking for a Shoulder and Elbow protector, which can be installed but are not included.
Both Size:There is a little bit of play on the jacket side, but it is a firm protector, so it will adjust to your body shape when you put it on and will be fixed in place effectively. It does not deform even if you hold it from above.
Winter jackets are thicker than the original jackets, and look stiffer when Protector is added. It is the opposite of the recently popular motorcycle wear that looks like regular clothes. But I personally like it.
SimpsonNSM-2203 (Jacket for summer) I also put it on the
It is thicker and more secure than the mesh protector that came with the Jacket. When I actually use the protector, I find that there is no airflow in the protector part. It feels very hot because the air can't escape properly. It is not good in summer. The mesh protector that comes with the mesh jacket is better.
The product description clearly states that it is for both Simpson and elf use. I was able to purchase it without hesitation.
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting to size is required, but can be easily done with scissors.
I think it is better protection than nothing, but when you actually fall down, the degree of bruising etc. will vary quite a bit if you don't have it on.
It's best not to fall, but you never know what can happen….
View detail