Reviews
Repair Parts for Other Brand Products!
External Exhaust System for YamahaDT230 LANZA Replaced as Repair Parts for RSV.
The Exhaust System sutra was Exactly, but the length was a little short.
I applied liquid gasket agent for the exhaust pipe and installed it.
Regularly check for oil dripping.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250 [Jebel] XC, SUZUKI DJEBEL250 [Jebel] XC
I'm satisfied
I installed it on DJEBEL250 XC.
I have no complaints about the lightness, exhaust noise, appearance, etc. and the price is not that high so I am satisfied.
The inner silencer can be removed, but if I remove it, the volume becomes Large, and the necessity of the carburetor setting seems to arise, so I put it as it is from the factory.
The volume after the exchange is a little larger than NORMAL, and the Small sound is comfortable.
As for the installation, it is possible to put it on according to the Instruction Manual, but it might have been easier to understand if there had been a photograph or an illustration.
Also, when I removed the OEM screw, there was one spot where there was an anti-teasing Torque (T-40), and I couldn't get it off in time with the tools I had, so I had to buy one to remove it.
Emblem was peeled off because the edge of the Etching treatment was sharp.
View detail
Fits: YAMAHA XT250X, YAMAHA serow250 [serow]., YAMAHA XG250 TRICKER [Tricker].
Not only does it perform, but it's exceptionally quiet!
important item
[Was there anything that disappointed you?
None in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
So far, none
[Do you have any products to compare it to?
RSV 1213C Carbon end
Frequently Asked Items
What made you decide to buy?
"Exhaust noise quietness"
Being able to actually see this in action
(It's fitted by Race and the Rider I use for street riding.)
How was your experience with it?
Idling is as quiet as NORMAL, or maybe even less than NORMAL
At full throttle, it sounds reasonably good
See video of the ride
https://youtu.be/ug09ENZRrIw
Was the installation difficult?
It's easy
However, you can insert it into the exhaust pipe quite deep, so it is difficult to position it
【Please tell me the installation point and hang】
Checking the Clearance and position of the Stay bolt and Stainless steel, little by little I closed the Steel Band
[Was the Instruction Manual easy to understand?
I wasn't sure about the positioning, but I generally understood
[Included Parts:were they on?
Stainless Steel Band
[Others]
Liquid gasket applied to exhaust pipe connection But I also heard that it flies off quickly, so I didn't use it myself
(Please use your own judgment.)
View detail
Fits: YAMAHA serow250 [serow]., YAMAHA XT250X, YAMAHA XG250 TRICKER [TRICKER] -07, YAMAHA XG250 TRICKER [TRICKER] -07
Sprocket 2 more Torque up!
important item
[Was there anything that disappointed you?
None in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
Installation of Heat Guard Bracket and Stainless Steel Band I wanted the Bolt to be 10 or 12mm instead of 11mm
[Do you have any products to compare it to?
SP Tadao
Frequently Asked Items
What made you decide to buy?
The fact that I was able to hear the detailed insights from the rider I use for both race and street riding
How was your experience with it?
Low and mid RPM Torque is up
(*1) See Webig's Diary for the full circuit run
→ https://imp.webike.net/diary/186707/
Was the installation difficult?
Depending on how the exhaust pipe is handled, the Right Flange nut may be I couldn't use the Torque wrench because the Ratchet wouldn't fit
It took some time to attach the UniversalHeat Guard to the curved part
(*2) See We-Big Diary for details
→ https://imp.webike.net/diary/186474/
【Please tell me the installation point and hang】
How to tighten the RightFlange nut and the UniversalHeat Guard device I think it's a point
for more information about hang (*2) You can find this information at
[Was the Instruction Manual easy to understand?
I had some questions, but I generally understood
[Included Parts:were they on?
One Stainless Steel Band and Nut
[Others]
I needed an Exhaust Gasket, so I prepared it in advance
Liquid gasket applied to exhaust pipe connection But I also heard that it flies off quickly, so I didn't use it myself
(Please use your own judgment.)
Referenced driving video
https://youtu.be/ug09ENZRrIw
View detail
It is transfer from Silent type
Balance of sound and Power think that it is good if setting is put out.
Personally I wish it was a bit bassy more - - -
Middle to high speed rotation improved without sacrificing low speed range.
If possible, I'd like the diameter to be 3 to 5 mm more extended Type - - - (Lol
View detail
Purchased by being attracted to price
It is considerably lighter than OEM and it looks like it likes taste so I am satisfied with using Large change.
At the time of installation, I did not enter the tool or I was lost in JointBand's processing, but once it got it.
Also, because our car body is processing Air box, we processed Baffle to take Balance, but it got a bit annoying but in NORMAL state the exit is quite narrowed down so the volume is discreet think.
View detail
Two cars were replaced
There were 2 RSV equipped vehicles in stock at the same time.
Because both exhaust sounds are broken.
There were only about 30% left in both, after replacement it sounds good.
It is better to buy this product if you think of hardship than winding with DIY it is an ellipse.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250 [Jebel] XC, SUZUKI DJEBEL250 [Jebel] XC
Attached to DJEBEL 250 XC
Anyway it's noisy.
Because the temperature is higher than the bass, it sounds like BALIBALIBALI.
High revolution area near Red is a good feeling with Race ish, but it sounds more like On road.
It was ☆ 4 because it was hard to strike the Seal which was memoed with dr-r and attached Bolt did not follow.
View detail
Fits: YAMAHA WR250 R European specification, YAMAHA WR250 X European specifications, YAMAHA WR250 R European specification, YAMAHA WR250 X European specifications
This product has performed structure in which it is a certain Manufacturer from ancient times, and the price became brave comparatively. By the engine performance dramatically stable although used on town riding, a path through a wood, etc., un
This product has performed structure in which it is a certain Manufacturer from ancient times, and the price became brave comparatively.
By the engine performance dramatically stable although used on
town riding, a path through a wood, etc.,
until [ from a low speed / high-speed ]
-- on the whole, it upgrades and I use, being pleasing! Since the
Design also had a favorite form individually quite smartly, the
Muffler of this Manufacturer was adopted!
View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
Although the object for CFR250L had not been put on the market yet for improvement in acceleration performance, and a weight saving, the hand was added and attached for a while. Since the pure Muffler had dropped exhaust efficiency too much, they were ex
Although the object for CFR250L had not been put on the market yet for improvement in acceleration performance, and a weight saving, the hand was added and attached for a while. Since the pure Muffler had dropped exhaust efficiency too much, they were exchanged. good to change for the moment -- I consider. About sound volume, exhaust efficiency thinks that it is a good Muffler in spite of quite moderate sound volume. View detail
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi.
It was used for my Motorcycle 91-year CRM[ make ]250R. The Silencer of a Chamber is a product made from RSV in the product made from infinity. The direction where the Tube has deteriorated is OK at 28 phi. View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
[a Webike Monitor] -- Muffler exchange of wish -- it carried out. attachment has been carried out especially satisfactorily. Since Mufflers were exchanged for the first time, the right and wrong of the engine performance are not known, but I fee
[a Webike Monitor] -- Muffler exchange of
wish -- it carried out.
attachment has been carried out especially satisfactorily.
Since Mufflers were exchanged for the first time, the right and wrong of the engine performance are not known, but I feel that the omission became good and became light.
sound would be slightly noisy -- ~.
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250
"Since the form of a genuine silencer is not pleasing, I purchased. It attaches in the second half of KLX. Since I unite R fender with the line of a seat and pushing with raising, the silencer meets the angle along the fender exactly and it's good. Howeve
"Since the form of a genuine silencer is not pleasing, I purchased. It attaches in the second half of KLX. Since I unite R fender with the line of a seat and pushing with raising, the silencer meets the angle along the fender exactly and it's good. However, it is the impression that silencer body which supports stay does not feel refreshed and it looks cheap. Although I think that sound volume is the quieter one for as the external, I think it is noisy for the public. I would become strangely sad when I'm warming up in the parking area of an apartment... Idling looks like the sound of a helicopter of the Self-Defense Forces. However, it sounds good when it turns. " View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
It changed from an exhaust sound like a mail motorcycle of the djebel 200 to a crisp exhaust sound. Sound is carried out that it is easy to be splendid. Although sound volume is measured pure and becomes large, it is not explosive sound roaring.
It changed from an exhaust sound like a mail motorcycle of the djebel 200 to a crisp exhaust sound.
Sound is carried out that it is easy to be splendid.
Although sound volume is measured pure and becomes large, it is not explosive sound roaring.
Although it does not know that an inner silencer (baffle) is removed ... When an liquid gasket was not used, there was exhaust leakage a little.
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker]., KAWASAKI KLX250
It was not too noisy, and did not elapse calmly, but was just right sound volume. Since exhaust leakage was started when the place of the silencer was only a clamp band, I also regard an liquid gasket as a joint pipe as it is better to be purchased si
It was not too noisy, and did not elapse calmly, but was just right sound volume.
Since exhaust leakage was started when the place of the silencer was only a clamp band, I also regard an liquid gasket as a joint pipe as it is better to be purchased simultaneously.
View detail
Fits: KAWASAKI SUPERSHERPA [Super Sherpa].
Torque is thin touch in case of normal cab setting. He lowered MJ+5 and one step of jet needle clip from normal. Sound is quiet, and when idling's is turned, it is a crisp sound. It is *5 if the liquid gasket is attached.
Torque is thin touch in case of normal cab setting.
He lowered MJ+5 and one step of jet needle clip from normal.
Sound is quiet, and when idling's is turned, it is a crisp sound.
It is *5 if the liquid gasket is attached.
View detail
Fits: SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel]., SUZUKI SX200, SUZUKI SX125, SUZUKI DJEBEL125 [Jebel]., SUZUKI DJEBEL200 [Jebel].
After equipping with the muffler, it ran about 800 km, and the elongation of speed was felt [ whether the omission of exhaust steam became good, and ] to the run of the highway. In the general road, compared with the standard muffler, an exhaust sound
After equipping with the muffler, it ran about 800 km, and the elongation of speed was felt [ whether the omission of exhaust steam became good, and ] to the run of the highway.
In the general road, compared with the standard muffler, an exhaust sound has contrast and it has said it to mind also in sound volume.
I think that sound volume goes into the larger one.
Since the rust of a standard muffler and the portion of an exhaust pipe was severe, appearance also became good and it has satisfied it.
View detail
Fits: SUZUKI DR250R, SUZUKI DJEBEL250 [Jebel] XC, SUZUKI DJEBEL250 [Jebel] XC
It is used by djebel 250XC. He wanted to change an exhaust sound and it purchased. By exchange of only a silencer, setting is not carried out especially. Therefore, a feeling of Power is completely equivalent in it being pure. although it
It is used by djebel 250XC.
He wanted to change an exhaust sound and it purchased.
By exchange of only a silencer, setting is not carried out especially.
Therefore, a feeling of Power is completely equivalent in it being pure.
although it is an important sound -- TAPAPAPA -- it is the dry tone quality called ..., and is the level which loud sound is emphasized as compared with the pure silencer, and was called kana ? also with a little large sound volume.
Having ridden to a crisp sound, it is felt pleasant.
It is too annoying at the time of the engine start in a residential street, and when does a complaint come? Although the super tps of low-pitched sound who had equipped before were effective and tone quality was good, it throbbed.
Although it is expensive, a design is also one article which quality is also perfect and we can recommend to you as an exchange silencer by Hideyasu.
View detail
Fits: HONDA XLR200, HONDA XLR125 R, HONDA XLR200, HONDA XLR125 R
XLR125R is equipped. A sound plays the PAPAPA sound which is the sound volume of the satisfactory range and got dry also in the residential area. The touring friend had also said that it was the sound out of which the ironic motivation which is no
XLR125R is equipped.
A sound plays the PAPAPA sound which is the sound volume of the satisfactory range and got dry also in the residential area.
The touring friend had also said that it was the sound out of which the ironic motivation which is not comes.
In a high rotation area, the feeling after wearing is extended rather than normal without a stress.
If a drive-line is arranged, the impression that the maximum high speed is extended will be received.
If the jet system No. [ about ] 2 is made deep, backfire will be lost, but.
Since a feeling of a power down comes out, at a normal engine, it is good exactly, and the necessity in particular for setting is not likely to have about [ out of which backfire comes for a while ] (since it arranges one by one and shines by neither a season nor the weather).
Looks are also rather stylish, we are that which also says affinity with MX fender, and it is recommended by all means.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X
It has attached to KLX. Being as it goes into an overall diameter also among EX pipes marketed, an omission becomes quite good. Comparatively [ the ] a price is also handy and, moreover, attachment is also easy by normal gasket specification.
It has attached to KLX.
Being as it goes into an overall diameter also among EX pipes marketed, an omission becomes quite good.
Comparatively [ the ] a price is also handy and, moreover, attachment is also easy by normal gasket specification.
Although I combined with the RSV series 1 and 2 grades, I felt that torque became thick.
It is better to purchase, after considering whether what we do with this first since it will carry out although pants are burned immediately and a guide peg is burned if it does not make on one's own as a problem of this EX pipe in order that there may be no heat guard.
moreover, although a normal gasket can be used, the slit for clamping be short comparatively [ with a deep receptacle portion ], and hold down enough at it -- since there is nothing and exhaust leakage is started from a connection section, recommendation applies an liquid gasket.
It is recommended at KLX and those that consider exchanging since the normal EX pipe is thin in case of D tiger after 03!
View detail