Reviews
Great quality!
Great handlebars in perfect quality. They look great on the bike.In terms of size, this type most closely matches the Pro Taper Bradshaw type of handlebars. A great choice for the YZ 250. View detail
What I found when I changed it.
The OEM taper handlebar does not fit the handheld closed type hand guard.
The reason is that the inner diameter of the Bar End is too narrow to accommodate the end adapter of the Hand Guard.
(Probably so thin that even other companies' hand guards would not fit in it.)
If you want to replace it, choose this Type to shorten the Handlebar width.
I saw a comment that the OEM width of 800mm is for foreigners with long arms and long for Japanese.
As a result, it feels right to me.
I chose Gold from the image, but the actual color tone is more like Orange.
View detail
Good vibes
Used to turn a KX85 Handlebar from an OEM 22.2 iron Handlebar to a 28.6 PROTAPER Taper Bar, also a PROTAPER Clamp OversizeHandlebar Mounting I was also happy with the Clamp, but I was not sure if it could be used with the KX85 because it said "rubber mount" and I was not sure if it could be used with the KX85. The quality of the Clamp is quite good, but the bolt that comes with the Clamp is not as good as the OEM bolt, so I used the OEM bolt. The position of the clamp is not so good, because it has to be raised by 20mm with this clamp. The size of the handlebar must be chosen with this 20mm increase in mind. View detail
Much more comfortable then the original grips
About quality and texture, I can confirm that the quality is great and that the material used is a durable rubber with a soft texture. About the feeling of use, I find the Pro Taper pillow grip set much more comfortable then the original grips and they are well matched to the styling of the Grom with their grip design. Products to buy together, A new throttle tube, specifically a quick throttle tube from Kitaco would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the pillow grip set for my installation was average due to the difficultly removing the original grips in one piece as I wanted to retain them for re-installation in the future if needed. Cost performance and comparison with other products, Pricing of this product is good. You receive a nicely designed rubber grip set that are comfortable but there are much cheaper grip sets available from other brands like Kijima if the price is too high for you. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Best with universal mount
When the included Suk WearGuard is installed, the clearance with the keyhole becomes narrower, so it is difficult to put our key with the Motorcycle shop and Hokkaido Touring commemorative key holder into the keyhole Smoothly. Considering practicality, it is realistic to use without SukWearGuard, which was the right decision later, but the combination with Pro taper's Universal mount is the best looking. The logo of Pro taper makes me feel good. View detail
Good quality
Very good quality and the best delivery. Received in less than 10 days. Will order again from this site. Thank you! View detail
Normal Handlebar
Very decent Handlebar at an affordable price
There is quite a wide variety, so you will be able to find something that suits you.
View detail
DR-Z400SMOEM cone diverted + used with Grip heater
Used to replace a handlebar on a DR-Z400SM that broke in a fall.
CR-High.
Comparison with OEMRenthal is
Overall width increases slightly.
Switch, there is not much scope to Clamp Lever.
The following points should be noted.
We installed a Grip heater on an OEM Throttle cone, but when we stripped the OEM grips, they were longer than 120mm to mount on a taper shaped cone.
This caused a slight Brake lever Clamp to be Up.
I think the performance is perfect.
View detail
easy to grasp
It is easy to grip, non-slip, and a good product for use with Enduro and Motocross. View detail
Used for XLR80 Handlebar
[How is it used?
I purchased this product because the OEMHandlebar was bent
The height of the Handlebar is just right and it seems sturdier than the OEM.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The Switch floats a little because there are no holes for mounting the Switch, which was the case in the OEM version.
Other than that, there are no problems. If you are concerned about it, drilling holes will help it arrive nicely.
How was your experience with it?
The height of the Handlebar has been obtained, and it is now at a good height for both Sitting and Standing.
[Included Parts:were they on?
Sticker was included.
[Was there anything that disappointed you?
Not particularly.
View detail
Can be mounted on WR155
[How is it used?
Available for WR155 Handlebar.
OEM is low, so anything taller than this item may be tough.
Also, this Handlebar is too low, making it difficult to close the Bolt on the Clamp.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Drilling is required to replace the handlebar.
How was your experience with it?
It is a good aperture.
[Included Parts:were they on?
It came with a set of bar pad.
Bar end caps were included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
MODEL Woods HIGH
Used on YZ250FX
Height 180cm
I use it in StandingMain in Course, and I feel that the width, height, and pull of the handlebar are all good for me, and it seems to manage the vibration of the engine very well.
It has been rolled quite a bit, including the lock, but it is only slightly bent and has good durability.
View detail
this one option
[How is it used?
This Grip is exquisitely soft and thick? It is hard to get blisters because of its softness and thickness. I have been using this Grip for 8 years.
I compete in Enduro races, and I have a habit of clinging to the handlebar, which easily causes blisters on my hands, but this Grip protects my palms even after a long run.
I also like it because it is surprisingly hard to slip on Muddy.
Was the one you received as per Image?
It's a Repeat buy so it's as per Image.
Was the installation difficult?
Cut and peel the old Grip with Cutter to remove the adhesive.
↓
Degrease and apply reliable and proven Cemedine SUPERX.
↓
Fix with Wire after inserting
How was your experience with it?
I've tried Half waffle products and others, but I keep coming back to this one.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It's not disappointing, but it's softer and a little less durable. But it doesn't wear out too fast.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Think carefully about what you do with the Wire you tie in Twister. Sometimes I see people who tie their hands in a direction and place that kills them.
View detail
Mounted on CROSS CUBJA10
Worn before going on a long-distance touring trip.
I was satisfied with the texture of the grip, design-wise, but after holding it for a long time.
The color of the leather gloves has been transferred and it looks a little reddish, and the eraser rubber scum is also a little reddish.
The stains like "I'm not sure what I'm supposed to do now, but I'm not sure.
Color:With Gray, it seems to stand out even more.
I was able to remove the transferred color and eraser rubber shavings with Parts cleaner.
I was still concerned about the dirt showing, so I replaced it with another Blackish Grip.
I will use Gloves again when I start using non-leather Material on a regular basis.
View detail
I thought it was a basic Handlebar.
OEMHandlebar of ktm250tpi is Quantity:Pair (for Left and Right) 1.It was replaced because it was 5cmCut and Handlebar was shaken.
On the difficult course, I could go with a short handlebar, but on the normal MX.EDCourse, when I raised the speed, the handlebar with cut was out of control and I was tired of holding it back.
When I replaced it, the handlebar width was wider and it was easier to control the front swing while driving, making it a little easier to drive.
There is a slight difference in height and pull from the ktmOEMHandlebar, but not much, and after one day of running, I felt no discomfort.
View detail
It's still cool.
[How is it used?
I bought a CRF125F and replaced the OEM handlebar with an Aluminum handlebar. The hand guard that I always use is only for Aluminum Handlebar.
I really wanted the 110 mini from Renthal, but the delivery date was undecided, so I had no choice but to go with this one.
Was the one you received as per Image?
The image is exactly as shown in the image. The quality is perfect.
Was the installation difficult?
Just replace it with OEM.
You can take a picture with your phone before you remove it so you can see where the Wiring and Wires went through.
How was your experience with it?
I knew from the measurement that I still lacked a little bit of start-up, but it wasn't so much that I couldn't ride, so I was satisfied.
I'm also thinking of chewing on UpClamp.
[Included Parts:were they on?
Bar pad is attached.
I am thankful that the CRF125F does not come with OEM.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Grip will need to be new and should be bought at the same time.
This time I decided to go with SCOTT's Mellow Grip. (https://www.webike.net/sd/24982240/)
Also, Grip bond, which is often forgotten. (https://www.webike.net/sd/20034236/)
View detail
Just low enough
Used for Z125PRO
HURRICANE Condor is not yet in stock, so I changed it to this one for the time being.
Position is good, although some holes need to be drilled to stop the rotation.
With Striker's Rear Sets, the look is neither too aggressive nor too rough.
View detail
Handlebar height and strength increased
OEMHandlebar was bent during a fall on a forest road, so it was changed.
The handlebar is thicker, so I also purchased a universal mount kit, which raises the height of the handlebar and makes it easier to stand.
crf250l md47 because it interferes with banjo bolt
The Clamp of the Hand Guard is changed to a Long Type UClamp, and since the length of the Hose from the Master Cylinder is not long enough, it is necessary to remove the Hose from the S-shaped Hook that is guiding the Hose. Also, if you put a Bar pad that fits this, it will be a little troublesome to insert and remove the key. However, considering the strength in terms of performance and ease of standing....
I haven't tipped over since I replaced the handlebar, so I don't know how strong it is.
View detail
I put these on my Race vehicles all the time.
I don't know how many times I have already purchased this product.
I always install this Grip on vehicles used for off-road racing.
The gap between the knobs is LargeKiku mud is boring, so it is easy to use during Muddy.
Rubber also has a soft, moist consistency, so the Point is my favorite because it does not tire easily of vibration and does not leave my hand.
The softness of the material also makes it easy to mold and fit in the hand.
But I don't think it's very Cool in terms of design (laughs).
However, after using it for a long period of time, the stickiness of Rubber increases. (Hydrolysis?) It will feel bad, so periodic replacement is necessary.
View detail
Parenthesis is good! And not tiring!
I fell down on a forest road and bent my Handlebar, so I had to choose it for my first Handlebar replacement!
I think Black would go great around the Handlebar on the RALLY50! I really couldn't be adventurous and go with another color…Beautiful Black...I prefer PROTAPER's Yellow color!
The height of the handlebar itself was suppressed to the extent that the height was raised by the clamp, which was good, but I did not feel much discomfort.
Now that it's horizontal, it's easier to stick my hand on the Handlebar when Breaking to maintain my posture! I wish I had changed it sooner!
By the way, I couldn't make a hole in the Switch box because I didn't want to waste it! I couldn't drill a hole in the Switch box!
View detail