Reviews
Firm Grip force
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
apprehensive
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
I often sit on a seat, so I was looking for a seat with good grip and found this one.
Was the one you received as per Image?
It was just like the Image. It has more gripping power than I expected.
Was the installation difficult?
It is difficult. It takes hang to put it up tight without too much.
How was your experience with it?
I am Large satisfied with the firm Grip force.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Much softer!
The brake lever is gold, so the grip is black. View detail
The grip is a bit...
The color of Anodized is good, and I bought it to match the color around the handlebar. In exchange, the grip is not so comfortable. View detail
I like it.
I was looking for the old Superbike Grip and came across this product. It's not the grip I was expecting, but I like the design and the comfort of the grip. View detail
Matching.
[How is it used?
I had used it in Panigale and was happy with the grip and grippy feel,
I also wore a different color on my MONKEY.
How was your experience with it?
The soft grip softened the vibration to the arm.
How did it compare to other products?
I have been using domino, but only twice a month,
After about 2 months, Left Side rubbing appeared.
[Points to note]
Since we had a hard time with the Panigale, we applied Parts cleaner to the inside of the MONKEY and installed it.
View detail
Comfortable to grip.
We have changed from OEMGrip to this product.
It is moderately shaped, making it very easy to grip and soft.
I also felt that they absorbed vibrations and reduced my fatigue when driving.
View detail
Non-slip and easy to grip
It is soft and easy to grip, and is thinner than the Barrel type, so it suits my small hands. View detail
Pro grip after all!
Replaced because OEM is slippery and vibrates.
All my Motorcycles so far have been Pro grip and I trust it.
I chose this one because I didn't want to wear it with others.
View detail
It is comfortable to hold and absorbs vibration well.
[How is it used?
I bought this product to refresh a used WR250R that was equipped with an external grip for road motorcycles.
Was the one you received as per Image?
Even with muddy Gloves, I can continue to play in the mountains without slipping on the Grip. "Mountain play=tipping over." It is a good product as per Image with a Grip that I can rely on.
Was the installation difficult?
The GripMaterial itself is soft, so it is not difficult to insert it into the handlebar afterwards. "P" Set the design of the "B" to be where you want it to be, and then dry the bond.
How was your experience with it?
The material itself is soft and reduces vibration from the handlebar quite well.
The grip is neither too thin nor too thick for me, and it grips well even when the gloves are wet with mud, which ultimately helps to reduce fatigue.
[Included Parts:were they on?
Quantity:Pair (for Left and Right) I think that all manufacturers of Grip products are like that.
[Was there anything that disappointed you?
Color with light-colored inside:Gray and easy to see dirt, so let's beautify it regularly.
Vibration absorption is quite promising due to the soft material, but durability may be somewhat unavoidable.
0Other items that may be useful include
Point and hang of installation
In winter, it may be easier to work with Dryeretc. to warm it up a little.
After installation, I tighten both ends and the middle with Tie Band and leave it in place for about a day (using RubberBond).
[Availability and clarity of the Instruction Manual
(For first time users) The thickness of the Motorcycle Grip is obviously different between the Axel Side and the Clutch Side (the Axel Holder is made thinner), so please do not be in a hurry. If you remember the above without Instruction Manual, I think you will not make a mistake in installation.
[Notes]
Not particularly
Well, there are two types of people in my group, those who apply Bond and those who don't, but I am the one who applies Bond because I don't want the grip to turn while driving.
If Bond is applied, allow about a day for the Pond to dry.
[ITEMS TO BUY TOGETHER
If you are a Bond painter, you should buy a strong RubberBond.
You can buy them at motorcycle supply stores, Webike, or even at your local home center.
[Opinions and requests to Manufacturer
The Large variation is helpful because it lineups a wide variety of grips.
Thank you for your continued support
View detail
Purchased as a vibration countermeasure for MAJESTYs
I learned that MAJESTYs vibration was not reduced by replacing the handlebar, so I thought I would try changing the Grip for the time being. As a result, the numbness in my hands disappeared and I am satisfied with the Large change. View detail
Just in time:??
The thickness and softness of the Handlebar when gripping it is just right!
In particular, the waffle pattern on the lower part of the Grip is easy to operate, with the fingers just catching on it.
View detail
Name Chain
I had put up a different one but immeChain.
I like the design and quality well enough.
Cheap counterfeit? I recommend that you use the genuine product.
View detail
Grip feeling Outclassing◎Moderately thick, no fatigue even over long distances
■ Design
I am a Touring Maine and I wanted something that felt good in my hand, so I prioritized comfort over design.
Performance
Compared to the OEM's ultra-thin rubber, the thickness of this product suppresses microvibration and eases hand fatigue at high RPM. It also features a good grip feeling due to its deep grooves and unevenness. Furthermore, this unevenness is compatible with the Throttle assist bar, making it easy to install, which was an unexpected Merit.
■Difficulty of installation
I asked the shop to install the Aluminum Ring Type, but it seems that it is a little more difficult to install than other grips. Especially, when they insert it after applying Grip Bond, it seems that the rubber tends to break easily, so they need to pay attention to it. Also, in the case of JC75 Grom, the Throttle bar is uneven, so in case of replacement from OEM, shaving work (additional labor charge in case of store) is required. The store had quite a bit of trouble installing them.
*Please note that the photos include the Bar End installed at the same time.
View detail
It's looking good!
I have installed it in the grom of a car that is also used with ….
It has the best grip, so I installed it on the CROSS CUB!
After installation, I went Touring ….
I was able to go there comfortably and without the fatigue of vibration avoidance!
View detail
This is kind of a new texture!
GelType Grip was installed for the first time.
I thought it would be difficult to install because of its special shape, but Grip UP." The letters of the name were written on the
Positioning was easy.
The part that hits the palm of the hand is parallel, or rather, it protrudes at the very front.
This protrusion seems to be caught and it seems to be easy to cruise at high speed.
There is little vibration, and this is a new tactile sensation that will be very exciting.
View detail
Thin Type
It is a thin type, so it is easy to grip for those with small hands. View detail
Moist and softer than OEM
I chose Black, so there is no apparent Impact,
Cushioning is good and may reduce fatigue.
LeftGrip is pushed in by force
RightGrip could only go about 1/3 of the way with arm strength, so I used Air's power to get it in.
Bond is not painted but probably Large sturdy.
View detail
Replace the old one
I put it on my CRM250. The one that came with it cracked due to aging, so I decided on the price and availability. View detail
Easy to grip
Purchased and installed with KITACOConvenienceParts item number:0900-969-00220.
The grip feels like it is one size thicker and very Fit.
I like the thin Grip." If you are a person who is not a good fit, perhaps you are not a good fit.
I like a thicker Grip, so it was exactly the grip I was looking for.
View detail
It is easy to use
I was looking for a Simple Grip and I found it. The price is cheap and it is a Recommendation! View detail