Reviews
as one would expect
When I ran it, the OEMscreen was low and the wind protection was not very effective, so I replaced it
It is difficult to replace the screen because of the well nut In addition, there will be a gap between the center of the screen and the cowl
I am satisfied with the windproofing effect after the replacement
View detail
Best windscreen for S1000R
Best windscreen for the BMW s1000r Perfectly fits my bike, use your tools under your rear seat to take off your existing small so called 'windscreen'. You will require a hex key to install your MRA screen. Their bolts are NOT star shaped! I think its best screen in the market. perfect finish and performance both for racing in the track and daily rides I just love the smooth airflow the screen makes for you View detail
German engineering through and through
I am 175cm tall (5'9"). The standard screen for my 2010 GTR didn't quite cut it. Too much buffering and with the screen extended I was subject to suction forward. This screen is taller. More aerodynamic. More solidly made. Completely adjustable with the spoiler. Now 90% buffering has gone. The ride is comfortable and quiet. I have a larger Eagle screen, onto which I can affix this same spoiler but so far, long trips, short trips, Summer heat or Winter cold, I have not needed it. This is a great screen :-D View detail
It's not what it looks like, but it works
I bought it as a test, and it's a bit windproof! 。 It's mounted around the back of the Light and underneath the meter It was a little bit difficult
And look "With Screen It doesn't feel different
I like it myself
View detail
It's effective
Used in VFR800F
I changed to Pooch's Screen (RACING) to counter the wind pressure of the OEMScreen The upper body has improved, but the wind pressure from a direct hit to the head? Turbulence? became so bad that I installed the product to counteract the problem
This product, you can adjust the angle and position yourself, which is good for those who are thinking about wind protection
I haven't been on the highway yet, but I'm feeling the effects on the regular roads (60km/h and up)
It's pricey, but I'll continue to use it as I have no intention of returning to OEMScreen now
For installation, I drilled holes in the Screen to make it completely fixed
Attach the attached transparent seal with the hole positions marked on the screen, and drill the holes with the electric drill
The position of the seal is very important, and if you do not make a mistake, it is Large sturdy
The assembly was done while looking at the Construction Manual, but the assembly drawings were It's not very easy to understand
If you're a DIY enthusiast, it's within the realm of possibility to do it with no problem
There was one torque-Screw (6 stars) for fixation and no tooling, so I decided to use it for the + I substituted the Tapping screw of
I dropped a part from the Screen and lost it during the installation process
I'm sure it's stuck somewhere, but I can't find it …
I even thought about re-purchasing it after a lot of trouble, but I ended up with Compressor's Air I blew around and it fell off and I was able to finish it
It's an expensive item, so be careful not to lose any parts when you install it!
The best position is yet to be determined, but we'll make a lot of adjustments as we run
View detail
Visibility is [Color] Clear-!
I found it to be very popular indeed
I'm happy with the design, the clarity, the installation accuracy, the clarity accuracy, everything!
When covering a motorcycle cover to prevent scratches, you can use the T I'm wearing a shirt (Lol)
View detail
Car processing with hand guard is required
To install it on the VERSYS-X 250 TOURER (car with hand guard), you need to modify it Required I cut the protruding part and installed it I wanted to roundly cut the part that hits the tooth, but I found it difficult to cut it roundly because it was too thick If you don't want to cut it, you need to remove the Hand guard View detail
Slightly bigger than OEMScreen.
Handlebar Guard hits Screen. Processing required. I am considering cutting or using another method. I wanted you to make it as a prerequisite to install a hand guard.
View detail
Feeling the wind flow changed
Windscreen hit the chest before it got windscreen, it felt quite fast at the high speed but after installation, the flow changed around the area of ??Helmet, it is a nice feeling. View detail
Japanese Vehicle Inspection Correspondence
Currently in use Zero gravity Screen
Since there is no mall at the tip, at the time of a car inspection A little ...
I bought it.
Previously, when using MRA made Screen
Was it a bad way of stopping, Bracket stopping the tip of the mall
I flew away.
View detail
As expected it is no problem with other companies' Screen
I bought it for an automobile inspection
Screen is a pouch, but it was able to be used without problem by fitting cleanly
I do not think it looks bad so I will keep it as it is
View detail
Fits: KAWASAKI NINJA650R, KAWASAKI ER-6f, KAWASAKI NINJA400R
I'm totally satisfied!
Before purchase, the thickness of Screen itself ? Strength etc. I was worried
Actually when I saw the actual thing, the finish was also beautiful and almost almost satisfactory in terms of strength!
Screen's edge The installation of Rubber was also easier than I thought.
also [Color] Smoke 's Screen is satisfied with fearlessness as it fits a tight feeling.
View detail
Wind hit is reduced!
I think that a little height is higher than NORMAL, the hit of the wind is reduced and a lot of tiredness will also be good.
Design is also my favorite because I like MRA the first time. Clear type Any visibility is good and can be recommended in Circuit.
View detail
Simple installation, minimum wind protection effect
There are several choices such as KIJIMA and pouch in SV 650, but I chose this MRA.
I thought about making Rain jacket, but because the delivery date was quite far, MRA arrival was quickly one of the reasons.
Just this MRAScreen installation picture is few and it was hard to read, but even if I actually purchased it and installed it, the installation is also simple, the Large kitchen is well prepared, well shaped, neither the shape nor cheap feeling, do not feel cheap I'm glad.
The color seems to be good atmosphere [Color] Smoke.
I do not have the impression of a dramatic windproof effect, but I think that it will be helped by the wind protection effect if I run for a long time rather than not.
There is also a sense of security that you can surpass the cold if you lie down in cold weather.
Large Kisaya and Forme, we are quite satisfied, so please refer to the photos.
Incidentally, the wind blown up was disturbed and got to hit Helmet, so wind noise sounded noisy inside Helmet.
I think that it was quieter to receive the straight wind by HelmetSingle Body.
I also became obsessed with it at first, but I got used to it soon..
View detail
Summer is a necessity item.
Africa Twin AdventureSportsOEM's Windshield is long and long distance etc.. Although it is very effective, since the wind does not come when it is town riding, it loaded this item with too much heat.
It will be quite cool as the wind will hit Helmet beautifully. It is just fine if you are within the high speed legal speed and there is no problem.
View detail
Screen? No storage space
【What made you decide the purchase?】
Z1000 with no storage space at all.
ETC, Radar, Switch etc around Handlebar is cluttered, I was worried about how to manage somehow.
ScreenReverse sideSpace of this product seemed to be the most wide, so it is expensive but purchased!
Result All fit within the Bracket on the ScreenReverse side and it was Large Correct.
【How was it actually used?】
As seen from the front or side, you can see it as a whole, but the shape seen from the driver's seat is Bubble shape and Race ish.
[Color] I purchased Smoke, but in the daytime I can see enough before Screen.
I think that the hit of the wind became a little easier.
Because I wanted a storage space and purchased it, I did not care about the appearance and function much, but I feel much Parenthesis better than I saw in the image when I installed it.
Especially feeling from the driver's side is good.
【Was it difficult to install? (Hard parts case)】
Installation is easy and can be installed in about 20 to 30 minutes.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I did not notice until installation, but Position light moves forward with Bracket.
As a result, in order to remove the Front mask, you can not remove it unless Screen is also removed.
[Is there anything I was disappointed about?]
I thought that the shape of Screen etc. is MRA as expected.
I felt that the actual thing was pretty good rather than looking at the picture.
There is no point that was disappointing.
【Hope for Manufacturer ? Please let me know if there are any improvement points]
Amber and Mirror, if there are more color variations, it is the best.
【Have you compared items?】
Originally attached ERMAX Screen.
I liked it in design, but since it was just on the Meter, it had almost no effect other than what it looked like.
View detail
There is no rectification effect on this itself ^ ^;
You are in trouble with evaluation.
I bought it to port the EXCEL used in 14R to H2SXSE.
Normal screen is enough Wind Cutting, but when driving in Up pose it is wind influence Large.
So, you can use Excel effectively (The method with the maximum Large limited effect) If you are installing it, this is it.
Even with a sitting at doka, there is almost no influence of the wind, and the face is in a calm state ♪
I think something about Visual, but it's easier for High speed Two.
View detail
Eliminate dissatisfaction at high speed
Whether it is incompatible with OEM High Screen, 80 km / Hitting Helmet from around where it hits Helmet Because the field of vision is blurred and it can not run comfortably, it is not supposed to be a compatible model, but Base is the same car body and Large is not considered a problem and it is thought that it is attached to AdventureSports I tried.
Before assembling the OEM with the High Screen, the ScreenBody part is the same as the OEM. A bit short.
For the time being, when trying to put Bolt in a temporary assembly, the hole position does not fit and it does not enter. As the result of the verification of each part, since the curvature of Screen is different, it seems that the position of the hole seems to be shifted to put the Bolt at the fixed position of the Bracket at a right angle from the screen, and it is necessary to forcibly pierce the Well nut collapsed according to the OEMS screen It seems.
Temporarily assembled again, when you final tighten while making fine adjustments, since Screen and Bolt's heads are in close contact with each other,.
But Well nut is being pulled diagonally but I see a state while thinking.
When I cut off the Handlebar to see if there is no interference, I got a hand guard, AdventureSports was Riser's handlebar was getting high, I remembered that I was convinced and handguard went bent and I went for test drive.
When I started running, Spoiler was not an eyesore as far as I was worried. As you increase Speed, you can feel that turbulence shaking the head troubled by OEM is decreasing even when Spoiler is lowered. If you raise Spoiler further turbulence will not come in and you will see the front through Spoiler, But the sound that the wind hits the helmet is not enough.
Running with Speed ??who worked a little bit, OEM will replace the upper part of the car with Quantity : Pair (for Left and Right) I was doing a movement like being swayed by, but since there is no such movement, the overall rectification effect will be considerably higher.
However, because Spoiler raising condition unexpectedly interferes with vision, it seems to be a way of using it as usual to lower it and raise it only during high-speed driving.
Since it was a good feeling at the test drive, we will process the interference part.
Decide the processing line with Masking tape, scrape with sander, prepare with paper, stand Cutter blade and finish it like a canvas. I think that it will be finished without taking as long as 30 minutes. Just interference was deeper than I thought, we had to scrape off the projecting parts of both sides to lift it by 20 mm.
As a result, if you are dissatisfied with OEMScreen I think that it is a screen that can be quite Recommendation.
I think OEM High Screen looks better than it looks.
View detail
what?
I do not know whether there is a rectification effect or not. Screen can be Large, but the effect of Flap for rectification is not well understood. View detail
Easy installation and good appearance.
There is also a long type, but if Short is good looking, it will not bother inserting / removing the key. I can not compare the rectification effect, so I do not know. View detail