【MRA】VARIO Touring Review
Slightly bigger than OEMScreen.
Handlebar Guard hits Screen. Processing required. I am considering cutting or using another method. I wanted you to make it as a prerequisite to install a hand guard.
Responses
Other reviews
High speed driving becomes very easy.
The only demerit is that the latest two-stage Screen compliant models are more than $10,000 cheaper
Other than that it's just Merit, HondaOEMScreen winds from shoulder to neck at 100 kilometers.
This two-stage Screen increases the speed range by 15 to 20 km/h, whereas the wind cutting sound can be heard in the airflow even when the screen is down.
The wind starts to blow from 120 km/h, but if you get down lightly, it is not hard even on the New Tokyo-Nagoya +10,
The best thing is that it's almost windless when it's down, yet down the road, if you fold it up, the wind comes to the Jacket just like the OEM.
View detail
I changed it because of the increase in Small scratches over 10 years of driving.
The screw fixture does not fit the mold and floats a little.
I think it looks good if you like it.
The wind flow is the same as NORMAL if it is folded up.
I honestly couldn't tell the difference when I moved it.
If you are worried about wind in Touring
I think it's better to buy a larger size.
View detail
There is a rectification effect, &hellip!
The OEM Screen also provides a reasonable amount of wind protection, so when you're driving on the highway, for example There is no wind pressure from the chin down to the bottom of the Helmet, and I felt it was something like this However, the wind from the Screen is uncomfortable at the Helmet head and shoulder area and I started to consider Screen replacement
I was worried about many things, but the material has a reputation for durability and high transparency:I went from Acrylic to MRA [Color] I chose Smoke's valio, which has a movable Flap at the top of the Screen The Screen shape looks like a shield that the OEM stands up vertically to keep the wind out from directly in front of you, but the Screen is rounded like a turtle's shell, and is shaped like a breeze
As for the rectification effect, if you raise the Flap and set the Screen to the highest position, you can make the wind flow beautifully They avoid it It's not as windless as a high speed tourer like the FJR, but it's not as windless as the OEM felt it was There is no unpleasant wind, and the air pocket has become larger than the OEM Impressions
I am satisfied with the performance, but I have two disappointments
One is that with Screen at the highest position, it is fully locked, and the Left Hand It interferes slightly with the guard Although the installation position tried to adjust several times, it is not resolved after all
However, if you lower it by 1Notch from the highest position, you can escape nicely and use it without interference! So it doesn't bother me too much (This may be due to individual body and product differences.)
The other thing is that it comes with Flap, but because of the weight on the top edge of the Screen When going through a step, the screen shakes Large, so that the base of the screen base is I'm a little concerned about the strength (I'll have to keep using this area to find out, though …)
The result is a highly satisfying product, generally speaking, in terms of both performance and appearance
View detail
Car processing with hand guard is required
To install it on the VERSYS-X 250 TOURER (car with hand guard), you need to modify it Required I cut the protruding part and installed it I wanted to roundly cut the part that hits the tooth, but I found it difficult to cut it roundly because it was too thick If you don't want to cut it, you need to remove the Hand guard View detail
Eliminate dissatisfaction at high speed
Whether it is incompatible with OEM High Screen, 80 km / Hitting Helmet from around where it hits Helmet Because the field of vision is blurred and it can not run comfortably, it is not supposed to be a compatible model, but Base is the same car body and Large is not considered a problem and it is thought that it is attached to AdventureSports I tried.
Before assembling the OEM with the High Screen, the ScreenBody part is the same as the OEM. A bit short.
For the time being, when trying to put Bolt in a temporary assembly, the hole position does not fit and it does not enter. As the result of the verification of each part, since the curvature of Screen is different, it seems that the position of the hole seems to be shifted to put the Bolt at the fixed position of the Bracket at a right angle from the screen, and it is necessary to forcibly pierce the Well nut collapsed according to the OEMS screen It seems.
Temporarily assembled again, when you final tighten while making fine adjustments, since Screen and Bolt's heads are in close contact with each other,.
But Well nut is being pulled diagonally but I see a state while thinking.
When I cut off the Handlebar to see if there is no interference, I got a hand guard, AdventureSports was Riser's handlebar was getting high, I remembered that I was convinced and handguard went bent and I went for test drive.
When I started running, Spoiler was not an eyesore as far as I was worried. As you increase Speed, you can feel that turbulence shaking the head troubled by OEM is decreasing even when Spoiler is lowered. If you raise Spoiler further turbulence will not come in and you will see the front through Spoiler, But the sound that the wind hits the helmet is not enough.
Running with Speed ??who worked a little bit, OEM will replace the upper part of the car with Quantity : Pair (for Left and Right) I was doing a movement like being swayed by, but since there is no such movement, the overall rectification effect will be considerably higher.
However, because Spoiler raising condition unexpectedly interferes with vision, it seems to be a way of using it as usual to lower it and raise it only during high-speed driving.
Since it was a good feeling at the test drive, we will process the interference part.
Decide the processing line with Masking tape, scrape with sander, prepare with paper, stand Cutter blade and finish it like a canvas. I think that it will be finished without taking as long as 30 minutes. Just interference was deeper than I thought, we had to scrape off the projecting parts of both sides to lift it by 20 mm.
As a result, if you are dissatisfied with OEMScreen I think that it is a screen that can be quite Recommendation.
I think OEM High Screen looks better than it looks.
View detail