Reviews
without a problem
Cheap ones are dangerous, so I wanted to buy a proper one.
It's working fine
View detail
Used on XJR1300.
I used this part for the OEM return of the OEM Carburetor on my XJR1300 RP01J. This part was cheaper than ordering from YamahaOEM Parts. View detail
Fits: Others For TDMR Carburetor Large body (Φ36-Φ41), Others TMR Carburetor for large body(Φ36-Φ41)
CarburetorOH
Replaced the original old part and no problem. View detail
CarburetorOH
Replaced from old parts, no problem. View detail
CarburetorOH
A complete set of CarburetorOH was available and the work was completed successfully. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
CarburetorOH
Replaced the original old part and no problem. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
CarburetorOH
Replaced the original old part and no problem. View detail
Replaced together with intake manifold
The purchased Spigot ring and intake manifold will be used to replace the Carburetor.
Size is almost the same as OEM Product. (OEM Product is discontinued and no longer available)
I need to check with the actual Motorcycle to see if it fits my Motorcycle.
View detail
tmr mjn32 main jet for cb400sf
Changed Main jet from #122.5 to #120 for tmrmjn32 for cb400sf to Regular Specification.
Jet is an ultra-precision part, so YOSHIMURAOEM Parts is purchased.
It is a very nice Jet with no BALI etc.
I had to buy four of them because of the 4-cylinder, but I felt it was a bit pricey as the Gold price was quite a bit higher if I got two each for the front and rear.
View detail
good quality, perfect fit
I used one of these for my needle seat on my dragstar 1100 carb. works great. Don't forget to lube it just a little to ensure a better seal. View detail
Used for DJEBEL250OEM TM28SScarburetor
Important!
As the title suggests, it was used for the OEMcarburetor of DJEBEL250.
We are using the OEM version on a DF200 DJEBEL, but the 250 setting is too rich, so we are changing a lot of things.
This carburetor is well The sticking is terrible." If the setting is removed from Large, the Idling suddenly becomes extremely high. [Color] It should be possible to clear.
As you can see from the size comparison photo with the persimmon seed, this is a very small part, but it is an important part that changes large.
First of all, just by replacing the number one footpeg, it becomes a completely different Character! I was surprised at this.
As per Net article. [Because it's OEM, we can OEM pimp it out. The only thing is that it can be used physically. Naturally, each Machine has different settings, so it will not run at all without modification.
It is still not a perfect score, but it is now running for a large amount of time.
It is not only Main and Pilot, but here, it is quite Large.
Replacement is recommended.
But the expense for each setting... I don't have a choice.
View detail
Used for TS200R OEMcarburetor
It was diverted to the TS200R OEMcarburetor.
OEM Parts, but they are already out of production and halfway I had no choice. This is the situation after purchasing and installing the product.
After the replacement, I feel that the sticking feeling in the low to mid speed range has diminished.
Since the Needle Jet had also been replaced earlier, we were not able to achieve a large improvement, but we are satisfied with the results.
We will continue to devote ourselves to maintenance so as not to let the fire of the 2 stooges die out.
View detail
tmrmjn32 mj122.5
I have a hanging tmrmjn on my CB and the only initial widths available are #125, #130 and #135, bought #122.5
Purchased to thin it out as it was faltering in the full open range.
Setting has improved and runs comfortably without faltering.
View detail
Valve
This is a common mjn Overflow countermeasure Parts. View detail
It's a cheap one
I have seen numerous MJN24s and almost all of them were torn up in this area.
On the other hand, I suppose I could get by with tattered ones, but they are cheap and I feel better if I change them.
View detail
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
When we purchase used equipment, we replace the Main, Pilotc., and all the parts.
We believe that replacing them with new ones will improve the peace of mind by an order of magnitude.
When replacing the driver, it is recommended to prepare a solid driver and remove it by pressing 8 times and 2 images, as it is easy to damage the large driver.
We have prepared the OEM Product No. this time. We are looking forward to seeing the changes after the actual ride.
View detail
Used for TS200R OEMcarburetor
Used to Restore TS200R.
OEM parts were too expensive, so we replaced them with these parts.
O-rings are also securely attached.
Since they are carburetorManufacturerOEM parts, the quality is second to none.
I think it is safe to use.
The packaging, in the case of SEA BASSOEM Parts, it comes in a transparent blind cap-like component. However, this product comes in a Vinyl bag, folded several times. If you are a nervous person, it might bother you. I am a Large sturdy person.
Since there was no image on the Product Page, I am attaching an image.
I hope this is helpful to you.
View detail
Used for TS200R OEMcarburetor.
As the title suggests, it was used for the TS200R OEMcarburetor.
The used car we purchased at a certain auction had a roughly bent float, perhaps because they did not want overflow, so we introduced a new one. The shape is a little different, but we assembled and tested it and found no problem at all.
I think it is also a good idea to replace old units as much as possible.
View detail
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
SEA BASSOEM Parts would cost twice as much. Inexpensive (But no...) The Large change is very helpful.
Use, as a matter of course. OEM parts from carburetorManufacturer are truly reliable!" We feel that this is a good thing.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Used for TS200R OEMcarburetor
As the title suggests, it was used for the TS200R OEMcarburetor.
As I mentioned in the washer section, I think many people lose the O-ring and washer here.:I think it would be much safer to replace it with a Set.
This is a part that can be recommended for Large change.
View detail