Reviews
Good for sv650x
It's very good product. Beautiful chain and perfect carbon steel of engine sprocket and rear sprocket. I recommend. I bought gold chain. 제품이 꽤 좋습니다. 추천드립니다. ---------------------------------------------------------- It's very good product. Beautiful chain and perfect carbon steel of engine sprocket and rear sprocket. I recommend. I bought a gold chain. The product is pretty good. I recommend it. Powered by Google Translator View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KX100, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, HONDA MONKEY BAJA, KTM 65 SX, APRILIA TUONO50, APRILIA RX6V, APRILIA MX, APRILIA 50RS, KAWASAKI KX85-II, KAWASAKI KX85, KAWASAKI KX80-II, KAWASAKI KX80
Delivery was very fast and neatly packaged.
Thank you for the quick delivery~!! The product was packaged very carefully. This was my first time ordering it, but I trust it and will be ordering it often.
I haven't tried installing the chain yet, but I think it will fit my Monkey 125 well since it's a trustworthy DID.
I'll leave a review again after installing it. May you prosper ------------------------------------------ ---------------- Thank you for the quick delivery~!! The product was packaged very carefully. This was my first time ordering it, but I trust it and will be ordering it often. I haven't tried installing the chain yet, but I think it will fit my Monkey 125 well since it's a trustworthy DID. I will leave a review after installing it. Good luck. Powered by Google Translator
View detail
Fits: HONDA NSR250R(SE), HONDA NSR250R(SP), HONDA NSR250R(SE), HONDA NSR250R(SP)
Worn Dry Clutch Components
Excellent set of products, sorted out Dry Clutch issue where Dry Clutch components had worn so much Clutch wouldn't disengage and spin freely. Now all working as it should. View detail
For the first time Pulley
Quantity from NORMAL's mellow:Just by replacing a set of sets, you can run comfortably.
The Lightweight Pulley Boss can also be replaced for even better response.
View detail
Fits: HONDA TODAY, HONDA DIO CHESTA, HONDA DIO CHESTA, HONDA DIO, HONDA DIO, HONDA Giorno
OEM is #1 ??
Anyway, OEM is the best.
It is safe.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom
Required but impressed
The stock springs are far to soft and the lifter plate is cheap and is known to crack if you use stiffer springs. Replaced with this high quality item. It immediatley changed the feel of the clutch and in my opinion is now how it should of been from the factory. View detail
Fits: SUZUKI Address V50 (4-stroke), SUZUKI Address V50 (4-stroke), SUZUKI Let's 4, SUZUKI Let's 4, SUZUKI Let's 4
The product arrived quickly.
I honestly haven't noticed any change in driving performance since I changed to the new one.
However, the replacement won't cause any immediate damage, so it's like buying peace of mind.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
Great fit
I installed this so i could upgrade the look and also add some more speed by changing the gearing. The item fitted really well and looked great. i have bought many products from this company and the quality is always good. View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Cool!
I went to Ron Two right after the exchange.
No problems
Gold for easy maintenance
Easy to see the dirt, easy to see how clean it is.
Now all we need is durability.
Good so far
View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100EX, HONDA CB1100RS, HONDA CRF1100L(Africa Twin), HONDA CB1000R, HONDA CB1100B, HONDA CB1100C, HONDA CB1100D, HONDA CB1100F, HONDA CB1100R, HONDA CB250N, HONDA CB250T, HONDA CB350 Four, HONDA CB400 Four, HONDA CB400AT (HOWK II), HONDA CB400D (SUPER HOWK III), HONDA CB400LC, HONDA CB400N (HOWK III)
Choose a safe and reliable DID
I purchased this product after rankdown from 530ZVMX to 530VXS, which is a lower model, but it is a product that can be used well enough.
Perhaps 530ZVMX will be more durable under the same usage environment.
View detail
Fits: HONDA TL125, SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA CB150R, KTM 85 SX, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI D Tracker 125, KAWASAKI AR125S, KAWASAKI AR125, SUZUKI BIRDIE50, SUZUKI BIRDIE50, SUZUKI BIRDIE50, SUZUKI BIRDIE50
Genuine DID spare chain link
This is definitely not a size of chain that I use very often at all but still is nice to have spare links just in case. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links for any mishaps whilst either fitting or a customer needs a spare. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CB300R
Easy Quantities:Set
I had only used SUNSTAR for Sprocket, but Chain was new to me.
The seal attached to the product is a grooved type with a structure that seems to hold grease well.
The Edge of the Plate is also arched, giving it a luxurious look.
View detail
Fits: HONDA gyro canopy, HONDA LEAD 50, HONDA LEAD 50, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA TACT, HONDA TACT, HONDA TACT, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO
Replaced for drivetrain maintenance
Replaced for maintenance of the drive system. The slide piece had probably not been replaced before, so it is inexpensive and was replaced on the side. I think the installation feeling is a little loose, but it is not something that comes off during driving, and I think it will get used to it. View detail
Fits: HONDA DJ-1, HONDA LIVE DIO, HONDA LIVE DIOSR, HONDA LIVE DIO, HONDA DIO XR BAJA, HONDA DIO CHESTA, HONDA TACT, HONDA TACT, HONDA TACT, HONDA SUPER DIO, HONDA SUPER DIO, HONDA Giorno, HONDA JULIO, HONDA GYROX, HONDA GYROUP, HONDA Eve, HONDA DJ-1, HONDA DIO, HONDA DIO (2Cycle), HONDA TACT
Driveline Refresh
Replaced for drivetrain maintenance. It was not so much to replace it, but I replaced it in a good mood. After the replacement, I did a test drive and felt that the acceleration was better. View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, HONDA CBR250R, HONDA CBR250RR, YAMAHA TZ250, YAMAHA YZF-R25A, SUZUKI GSX250R, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja250 SL, KAWASAKI Ninja250R, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z250 SL, KTM RC125, KTM RC125, KTM RC250, YAMAHA MT03
Friction loss reduction was more than expected.
I had been using the usual Gold and Silver plating types, but the 250CC seemed to be able to handle city driving... View detail
A bit pricey, but worth the investment.
Used for '09 Yamaha wr250f.
Clutch WireMaintenance was frequently performed with Bell Hammer, so the lightness was only slightly lighter, but the semi-clutch area was expanded and control became easier.
Also, it is very good that the Lever play does not change when the Handlebar is turned off and the Meet Point remains the same.
The weight of Lever's pull is not habitual and is always constant.
Leaving Lever (Connecting Clutch) Control at will in
On the flip side, Demerit is a point that is difficult to understand in the sense of Lever even if Clutch is Heat.
But there was a synergy with ClutchBody's Setting.
Since Lever is light, I don't feel like my arm is going to go up even if I apply it all over the place with one finger and a half cradle.
One personal disappointment is that the external Lever for HYMEC 167 is
I can only find about ARC and the shape of the attached Lever does not fit very well, so I will try to accommodate this by shaving it off.
Durability will be confirmed after use.
I can also get Repair Parts,
Installation is easy and I am glad I bought these parts.
View detail
Fits: YAMAHA YZF-R3, YAMAHA XJ6NA, YAMAHA SRX400, YAMAHA MT-03, KAWASAKI Ninja ZX-6R (ZX636), HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NS250R, HONDA NS250F, HONDA CBR400R, HONDA CB400F, HONDA CB250R, HONDA CB250F, HONDA 400X, HONDA 400X, HONDA CBR500R, HONDA CB500X, HONDA CB500F
The chain is also DID
The chain seems to be DID as expected.
In the 520 size, it seems to be known as DID's 520ERV7.
I ordered it at the request of a friend I know, and he was satisfied.
The gold chain goes well with the bike.
520 = DID 520ERV7. -------------------------------------------------- -------- The chain seems to be DID as expected. In the 520 size, it seems to be known as DID's 520ERV7. I ordered it at the request of a friend I know, and he was satisfied. The gold chain goes well with the bike. 520 = DID 520ERV7. Powered by Google Translator
View detail
Fits: HONDA CB 600 F HORNET , HONDA CB 600 F HORNET , HONDA CBF 600 N , HONDA CBF 600 N ABS , HONDA CBF 600 S , HONDA CBF 600 S ABS , HONDA CBR 600 F
Genuine JT Sprockets Front for CBR600F 2006
I purchased this along with the rear sprocket from JT sprockets brand. I decided to get the same brand as I have used them many times before and found the quality versus price is exceptional. Wanted to stick to the oem set up gearing as this is how the bike is supposed to operate. Maybe in the future I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the simialr price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
Fits: HONDA CBR 600 RR ABS , HONDA CBR 600 RR , HONDA CBR 600 F SPORT , HONDA CBR 600 F , HONDA CBR 1000 RR FIREBLADE SP ABS , HONDA CBR 1000 RR FIREBLADE SP , HONDA CBR 1000 RR FIREBLADE ABS , HONDA CBR 1000 RR FIREBLADE , HONDA CBR 1000 RR FIREBLADE
Genuine JT Sprockets Rear for CBR600F 2006
Purchased along with the front sprocket as spare to replace my stock ones when needed. Have used JT sprockets for many years and know they are brilliant quality and do last a long time compared to some other brands. Decided to go one tooth smaller for a bit of a punt to how this compares to stock gearing. Pretty asy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. The cost of the sprocket was excellent value. I also ordered along with other parts so the cost shipping was spread out too. My delivery was at my door and there was no damage during transit. Webike warehouse took the time to make sure that nothing moved during transit as these sprockets can make a mess of other parts less sturdy. The machining of these sprockets is second to none and I have said this from day one of using them. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the simialr price before. I will stick with JT Sprockets. I have fitted many many times before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
good-looking
Replaced with Swing Arm replacement.
Better looking than OEM
View detail