Reviews
The parts are different.
I purchased this part for my KYMCO Agility 125, but it was a HondaDIOSeries part.
I chose the right model, but the shape was different.
Webike has the wrong model of car for which it is compatible.
View detail
Cheaper than OEM
Since it is not a fixed part but a consumable part, I decided to purchase a cheaper one.
And the fact that it was a WeBig special order was Plus.
View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS
It was less expensive than OEMs.
I don't think it's particularly difficult if you have the tools and kills to replace the Belt, although it does feel a little stiffer than OEM. Enhancement." Could it be the Brush-bo effect of the word "Brush"?
There are no arrows for the direction of installation rotation, so be careful in installation. Perhaps the direction in which the letters can be read at the time of installation should be correct.
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
ALBA Weight Roller
I used it for OEMPulley.
No abnormal noise.
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Repeat
Quantity in the previous vehicle:2pc, this is the first pc in a newly purchased vehicle.
The last two replacements were used for 10,000 km and 13,000 km respectively, and they did not malfunction or break, making them a safe repeat purchase.
As the product description says, it is compatible with High Speed Pulley. Is it a little Long?
I am using it on my PCX125 engine in combination with a DAYTONAHigh Speed Pulley and a KITACO Power Drive Kit Type X. I have not had any problems.
As the product description says, it is compatible with High Speed Pulley.
View detail
Strengthen Belt
CYGNUS x2 type
Used for commuter rapid transit
KN Project High PulleyType 2 Boss Washer0.8mm AdvancedPRO Boss kosoClutch&Outer kosoCHAMPTorque Camshaft KN Project Two-Split Pin ALBA Reinforced Belt Assembly
I didn't run that much and it stretched out like a LongBelt. There are no cracks at all. The inner side is less reinforced than the outer side.
View detail
Fits: SUZUKI LETS II (2Cycle)
I think it's good as a for repair, about a light tune.
LETS II (CA1PA) I thought it was good for NORMAL and light tune.
By the way, my LETS II is Burial's StealthExhaust System DAYTONA's PowerAdviseHigh Speed Pulley Red Box. Surprisingly? I'm not sure if it's a good match with these, but it's contributing to a good amount of speed.
As for durability, I can't say for sure since I haven't driven more than 1,000 km with it yet. I think it will be durable if I break it in a little.
View detail
Fits: HONDA LIVE DIO, HONDA DIO (2Cycle), HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA Giorno, HONDA GYROX, HONDA GYROX, HONDA GYROX, HONDA GYROX, HONDA GYROUP, HONDA TACT, HONDA TACT
new blet drive smooth ride
my old giorno (2T) has poor drive feed so i open the L case i found the belt has old and loose tension so this is best chance to change NEW BELT after change? good After replacing the belt, the drivetrain noise is reduced, the vibration is reduced, and it runs well anyway. I checked the size and bought it. View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Reinforcement Type?Does it really make a difference? → Results
[How is it used?
In use.
PCX125 (JF28) I replaced the drivetrain on the suspension of the The DriveV Belt that I had originally put on felt like it was slipping somewhat. It had about 5000km on it since I last checked it. When I opened it up, the old one already had a crack in the valley and was already at the end of its life. Was it a little too late?
Was the one you received as per Image?
I liked Parenthesis better than Image because it was kind of, well, fibrous.
I was under the impression that I received a very good product for the price.
The side angles are totally different when compared to the OEM Drive belt.
The angle is much closer to vertical on this product. This product is much closer to vertical angle. I think so.
Was the installation difficult?
I thought it needed a little more Power to install than the OEM one.
I'm not sure if it's because it's new or not, but I'd suggest doing some preliminary research on youtube on how to do things with Tie Wraps before you go to work on it.
The first time I opened the Crankcase, I had a hard time getting it off. If you are going to do this, please use a T-type Box Wrench before you start. (I think it was 8mm) and Rubber hammer are recommended to be prepared.
How was your experience with it?
It has been driven about 100 km.
To be honest, I thought it wouldn't change that much even though it was a reinforced V-Type. Immediately after the replacement, it feels like there is no change.
But after about 10k miles it started to feel right, and it was clearly quicker and more fun at lower speeds. Maybe it's because it's new, but well, that's it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None! Satisfied!
View detail
Fits: SUZUKI LETS4, SUZUKI LETS4, SUZUKI LETS4
High Speed Pulley compatible
I replaced it at the same time when I installed the High Speed Pulley Kit.
After 12 years and over 8,000 miles of use, the OEMs still seemed to work, but I chose to go with the reinforced version because I drive over 60 miles every day to work.
There is no visible effect when installed, but the price is cheap and good.
I will have to run it to see how durable it is, but I'm hoping for the best.
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
Reassurance of domestic production
I changed it to LEAD125 at 6,000 km It seems to fall off Also, when the vibration of the Engine becomes large during driving, it is time to replace it
This is a GRONDEMENTMassimo Belt This is a simple packaged item in Vinyl, so it's a GRONDEMENT Massimo Belt It's cheaper than the Belt The product is the same, so it's a good buy
I have used it on various Scooters and it is very accurate Inexpensive belts can increase the engine vibration and break easily It is a very good Belt with no It is recommended It does not include an Instruction Manual, so it is only for those who have knowledge of it It is
View detail
Fits: HONDA Sh MODE, HONDA PCX125, HONDA LEAD125
The Drive belt is a necessary and sufficient for the cost performance
Purchased for the drivetrain Refresh on my commuter vehicle I installed it
I wonder if it's made a little longer than the OEM Product, pulled to Top speed I feel that the sense of the drivetrain at the time has decreased Until now, the feeling that the resistance other than Engine Power has been applied with the depression of Belt is But when I replaced it with this Drive belt, the discomfort was gone
Often times, mid-custom scooters tend to have a High Speed The lack of belt length due to the inclusion of a Pulley will cause your belt to run out You may be able to avoid such risks by using this slightly longer Belt
View detail
Fits: SUZUKI zzz, SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI Address 110, SUZUKI Address 110, SUZUKI Let's 5, SUZUKI Let's 4, SUZUKI Let's 5, SUZUKI Let's 4
I'm happy with the costumer!
I used it on my ADDRESS110, and after 3,000km, I checked it, and there was a little bit of wear and tear I think it is acceptable The price is low enough View detail
Fits: YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA BJ, YAMAHA Jog ZR
soft
Just grab it with both hands and shrink it to close to the main line
With BearingSlider in the old Dio110
Used in conjunction with KN's Sense p-collar
Belt is made from ZOOMER50 and has enough hardness
If you turn it, it will catch on the Torque CamshaftCover a little bit
Polishing BALI with Water-resistance Paper
No reduction in maximum speed due to the impact of SenseP hardness
It's not a fluffy gearshift because it's assembled by pushing it in
A neat finish
There is no feeling of extreme hardness loss after a while of assembly
I didn't have a SenseP that I was happy with the combination
I could use the Bearslayer that I had removed
I'm satisfied
View detail
Fits: HONDA JOKER90, HONDA JOKER90, HONDA LEAD 90, HONDA LEAD 90, HONDA LEAD 90, HONDA LEAD 90
The size is completely different
I did a search for JOKER Helmet 90 and got a Hit, so you'd think you could use it
Not that you can compare it to the OEMs... by the way
I couldn't use it because it was very small, and I think the seller is also responsible for it
I cried myself to sleep and said it was my fault for buying it without checking
The Large size ones in the image are OEM
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY, HONDA Giorno, HONDA DIO, HONDA LIVE DIO
Installation is fine
We will test the performance and durability in the future
The OEM is 13g, so I bought 10g and planned to use half of it, but the OEM rollers got worn out and hand (of a clock)
I used all of them because they were no longer circular and I couldn't use them
Will the acceleration be better and the top speed drop off?
The picture is an OEM with discolored wear, how can it wear this much with 4000km on the odometer?
Looking at the wear and tear, I'm guessing it still needs some Grease
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA Axis Street, YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA Majesty 125
Sorry
At the time of installation, when the Holder came off the universal holder was not fixed well Two fins were missing in
There is no problem to run, but if the fin breaks off so easily, I doubt the durability of the future You will not
The gearbox is not so different from OEM... but.. Well, it's a substitute for OEM, so..
If you want to get rid of it quickly and cheaply, it may be useful, but it has some difficulties in durability I would recommend buying it as a link to buy Face
View detail
Fits: HONDA ZOOMER
Ordinary Belts
Not the Reinforcement Type, but the GRONDEMENT VBJ- as shown in the picture 109H
It's not so cheap, it just doesn't have a bag
Just in case it's not the cheapest of Taiwanese, I want to buy a GRONDEMENT NORMALBelt You can buy it when you want
View detail
Fits: HONDA LEAD 50, HONDA LEAD 90, HONDA ZOOMER(Ruckus), HONDA Giorno, HONDA DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA TODAY, HONDA LEAD 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA CREA SCOOPY
That's how much it changes!
Searching the Net for instructions before the AF 34 air cleaner replacement, Weight If you remove the GEAR? part, you will not have to worry about it Replacing the WR itself was so easy that even my 6 year old son could do it The feedback after the replacement was so noticeable that even I could tell the original bike was lighter If you're on the same motorized bike, you should swap it out sooner rather than later! View detail