Reviews
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA SUPER CUBC125, HONDA ADV160, HONDA SUPER CUBC125, HONDA PCX125-E HEV
The price is ・・・・
Frankly, I think the price is tough for this product. View detail
Fits: SUZUKI SWISH, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI LETS5, SUZUKI Address V50, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI LETS4, SUZUKI LETS, SUZUKI ADDRESS V50 G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI Gixxer 150.
It is safer to replace it with a new one every time Oil is replaced.
This Washer has two sides, but the instructions are easy to follow and you will not get lost.
If it were cheaper, I would change it every time, but frankly, I don't think it would leak even if I changed it every two times. (I don't know...)
View detail
Good cosmetics if you don't take it on and off often.
[How is it used?
Used on OEM Exhaust pipe and Silencer joint of MainMotorcycle's XJR1300C that had been inspected.
The Exhaust System itself is the same as the normal XJR1300, so Gasket could be used normally.
How was your experience with it?
The exhaust leaks were normally prevented, and this black shiny joint gasket from KITACO was able to keep the exhaust from leaking once it was used.
Even if successfully removed, it is basically non-reusable. This is a type of Gasket that is quite crushed and sealed.
How did it compare to other products?
I decided to go with KITACO because the OEM Product costs 2300 yen.
However, the OEM gasket is a metal type that can be used over and over again as long as the shape does not get messed up when tightened.
I think they are essentially disposable. In fact, it can be used normally.
So it is cosier to buy OEM if you have to wear it on and off a lot.
[Points to note]
Anyway, Gasket sticks to it and I can't peel it off. I wish you could do something about this.
Even if I wanted to make a new Gasket, it just falls apart and won't come off at all.
Can it be removed quickly if I apply something to it before installation?
View detail
A little more Click feeling when wearing it.
The Belt width of the chinstrap was 24mm, with a Magnet stud to hold the ends together at the end of the chinstrap, but it passed through easily with no machining Tomei required.
It is difficult to tell if the Buckle has been installed because there is not enough Click feeling on the Buckle when it is installed. I think this is an area in need of improvement.
Also, there is no Instruction Manual on how to attach it. This is one more reason.
I'll use it a little more and may switch back to the original D Ring…
View detail
You can have it without it, but you can have it with it.
Motorcycle body
I wanted to add a few more Gold colors.
I installed it.
It's more for appearance than for protection.
Side cover by Cats and
Note the interference!
LimitLarge because I think it's sturdy.
We will see how it goes for a while.
View detail
I would like a little more Click feeling when wearing it.
Installation was surprisingly easy.
I think a sense of Click when wearing it would increase the sense of security.
View detail
Fits: HONDA SUPER CUB110 Weather Child ver., HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSSCUB110, HONDA CROSSCUB110 KUMAMON ver.
Tail lamp
Bolt to Quantity:It was an easy replacement just by loosening 2pcs.
I think it looks better.
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
CT125for Front as
I replaced it somehow.
I can't feel the effect when driving, but I guess it's a matter of feeling.
The color is black, so it is recommended for dress-up purposes.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA CRF50F, HONDA solo, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA XR70R, HONDA XR50R (for competition), HONDA CRF70F, HONDA MAGNA50, HONDA CL50, HONDA GORILLA, HONDA GORILLA, HONDA JAZZ, HONDA GIORCUB, HONDA DAX, HONDA CUB press 50, HONDA CUB press 50
InsuranceParts
Incorporated with Bore up.
There are many theories as to whether it is really necessary, but it is better for your mental health to have it set up as an insurance policy.
However, if the orifice diameter expansion Large is not done in conjunction with the orifice diameter expansion Large, it will not make much sense, so processing is a prerequisite.
Also, it is highly likely that the Plus screw for fixing is damaged when removing the NORMALPump, and since the fixing screw is not included, it is better to prepare a suitable size or a spare OEM Product.
By the way, I have been shibaing down Mt.
View detail
A little expensive...
It makes you look pretty! It will stand out enough to get everyone's attention lol.
It will also make it easier to step on the Brake.
Just be careful not to over-tighten it when installing it, the Screw head will lick it!
View detail
The condition of the packaging of the product is questionable, but …
It was supposed to be new, but some of the corners had been scraped off and the substrate was visible.
Silver would not bother me at all, but since it is Red, the underlying Silver is a concern.
It may cost more, but the material of these items must be packaged individually, or there will be bound and scraping due to contact.
I would like to see quality commensurate with the price.
View detail
Fits: Others Compatible with Digital Temperature Indicator
Water Temperature Gauge Attachment Car Day Use
I purchased this product to intercept the Heater Hose of my vehicle.
I bought this product for Motorcycle, although there is also a for Vehicle.
It is 14mm, but I shaved it down to 13mm and used it.
It looks great and I am satisfied with the Large change!
View detail
Fits: HONDA LEAD110 EX, HONDA LEAD110, HONDA BENLY50110 PRO, HONDA BENLY50110, HONDA BENLY50 PRO, HONDA BENLY50
passing mark
It gets dirty very quickly, and the air cleaner replacement is several times benly50110
The air cleaner I am currently working with from KN Planning is about 105% larger than STD and I had to shave a lot to get it to fit, so I felt bad and wanted to try another company, so I bought KITACOBrand.
As a result, KITACO was 97% of STD, so it fit perfectly, but the position of the fixing hole was also on the inside, so we had to widen the hole a little.
Well, Quantity:Pair (for Left and Right) It's only about 1mm each, and since it's plastic, it's easy to process, so if you're willing to do it, it's a good idea.
However, there is no doubt that OEM is the best when it comes to air cleaner for Benly50.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
I added a helmet holder to prevent theft.
I forgot to input the vehicle type for installation, so...
[How is it used?
I usually hooked it to Mirror, but I thought it would be better to consider security when I was on the road, so I used Helmet holder. K. TOUR Purchase
Was the one you received as per Image?
I received something that looked very ordinary.
Was the installation difficult?
Installation itself was so easy that I did not need the Instruction Manual, but it would have been nice to have an option for Torque Screws, because I could remove it with a Hexagonal Wrench even if it was locked with a key.
How was your experience with it?
Since the lock is free to flip up after turning the key, I thought it would be useful if it stopped lightly when opened.
[Included Parts:were they on?
It came with everything, but it needs a screw lock agent or something like that.
[Was there anything that disappointed you?
I wish there was a locking agent on the Screw.
Installation
Only 5mm and 6mm Hexagonal Wrench are used.
How to install.
Remove the existing Left Side Tandem Footpeg with a 6mm Wrench.
I don't know if it was Screw stop or sticking, but it was hard.
Helmet holder K. TOUR and assemble it while reading the Instruction Manual.
[About the key].
The key is Quantity:It comes with 2pcs.
Diary to the community is here.
https://imp.webike.net/diary/241088/
View detail
one's feeling when wearing something
It feels like it sticks out more than expected.
The same size as the OEMBolt is considered Beauty.
View detail
Looks great!
Looks nice, but Mirror visibility is not good. View detail
For power extraction
I bought this one because I don't want to damage Wiring with Electro Tap etc.
Simply interrupt the Coupler in the Headlight.
View detail
Fits: HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50
For maximum speed UP!
Since CUB's Engine is limited, I aimed to increase the maximum speed with Final. The effect is so-so. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
Installation itself is easy; Wiring is asked to Sense.
The installation itself is simply a matter of removing the Tandem seat and inserting it into the Stop-lamp Connector. If you want to use the power supply for charging a smartphone or other devices, you need to bring a charging socket or other wiring around the handlebar. It is dangerous because the wiring may be shorted or melted by heat. View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
USB power supply accompaniment
When connecting to the Diagnostic Connector, it is not easy to work with, so it is easier to do so after removing the Rear cowl. View detail