Reviews
Fits: HONDA SUPER CUB 110, HONDA SUPER CUB 110, HONDA CROSS CUB 110, HONDA CROSS CUB 110, HONDA SUPER CUB 50 PRO, HONDA CROSS CUB 50, HONDA SUPER CUB 50, HONDA CROSS CUB 110, HONDA SUPER CUB 110 PRO
GND
GND is not available from the Connector and must be separately connected to the vehicle body View detail
Fits: KAWASAKI Z900RS-Cafe, KAWASAKI Z900RS, KAWASAKI NINJAH2, KAWASAKI NINJAZX-10R, KAWASAKI NINJAZX-10R
It did not work for New Modelh2sx
It did not work for the 2022 Ninjah2sxse.
The diagnostic Connector seems to be using 6P025WP-MWT-F-tr.
If you want to make your own, please buy 6P025WP-MWT-M-tr.
By the way, when the key is on, the pinch is on the top, and the leftmost bottom is energized. (12V) do
View detail
For power extraction
I bought this one because I don't want to damage Wiring with Electro Tap etc.
Simply interrupt the Coupler in the Headlight.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
Installation itself is easy; Wiring is asked to Sense.
The installation itself is simply a matter of removing the Tandem seat and inserting it into the Stop-lamp Connector. If you want to use the power supply for charging a smartphone or other devices, you need to bring a charging socket or other wiring around the handlebar. It is dangerous because the wiring may be shorted or melted by heat. View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
USB power supply accompaniment
When connecting to the Diagnostic Connector, it is not easy to work with, so it is easier to do so after removing the Rear cowl. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Used on a 2022 TENERE 700
Connected to ACC power in the Right SideCowl for connection of a drareco.
The Pin Assign was different in the shipping state, so we checked it with Tester and replaced the Pin with a new one.
View detail
No hassle
You can get power just by removing the Coupler… What a good time we live in!
Ten minutes is all it takes to complete the work.
Safe for first-time tinkerers
View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI NINJAZX-25R-SE, KAWASAKI NINJAZX-25R, KAWASAKI NINJA250R
Not compatible with 2021 NINJA2 Helmet50R
For the compatible car models
NINJA250R
(FNO). (EX250P-A19891 to A24030)
I bought it but it didn't fit.
The 2021 NINJA2 Helmet50R has a
Buy the one in 756-9000440
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Installation instructions are unclear.
The installation instructions are only for the cowl, not the side cowl!
It's not that difficult a task.
View detail
Fits: KAWASAKI Z900RS-Cafe, KAWASAKI Z900RS, KAWASAKI NINJAH2, KAWASAKI NINJAZX-10R, KAWASAKI NINJAZX-10R
Bullet Terminal is a little too small.
The bullet terminal of the ACC power out is a little small, and the Male terminal of the same standard is hard to enter. As a result, I cut it off and reattached the Bullet Terminal. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
End cap doesn't fit.
The end cap that originally came with it is not attached, and although it can be attached, the claw of the clamping gold does not hang and the end cap cannot be fixed. View detail
easy to work with
I used it to get power from the Grom.
It will be a very useful product when you take out from Coupler and Battery respectively.
It is easy for beginners to work with.
View detail
Fits: KAWASAKI NINJA 650, KAWASAKI ZrX1200 ZrX1200 DAEG, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI NINJA 250, KAWASAKI ESTRELLA 250, KAWASAKI VERSYS-X250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z125 PRO, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 400, KAWASAKI NINJA 250SL
Ordinary but useful
I was able to use it on my 2019 Z650 with no problems However, the Bullet Type Terminal is slightly thinner than the one I have from Emon Industries It took some strength View detail