Reviews
Used for Jams Gold BECK-1 Riding jacketM Size
This is a RoughAndRoad Air throughPad, which means that it is not a product that matches JamsGold's Jacket, so you are on your own regarding its use.
Each Size of Pad is
Back Pad, approx. 43 cm (length), 33 cm (width)
Chest Pad, approx. 34.5 cm (length), 16.5 cm (width)
Shoulder pad, approx. 21.5 cm (length), 17 cm (width)
Elbow pad, approx. 27 cm (length), 16 cm (width)
The shoulder and elbow pads are curved and the length is aligned with the curved surface. The shoulder and elbow pads are curved, and the length is adapted to the curved surface.
The material is urethane, so it can be cut.
The Jams Gold BECK-1 Riding jacketM Size allows me to use the shoulder and elbow pads as they are. The back and chest pad had to be cut to fit.
View detail
I bought it because of how cool it looks.
I purchased the SeparateChest Protector from Thailand Chi to make it independent of Wear.
The CPS-compliant Protector can be attached directly to the Wear, but I was concerned about the Protector dangling when the front is open and the chest portion of the Wear pushing up toward the face when worn, so I decided to make it independent by attaching a Belt.
I didn't like the fact that the OEM product from Thailand has a large logo, so I bought the Honda collaboration one because of its appearance.
I am a firmly type of person and I wear XL for riding wear with a little room to spare, but I am able to wear this band with a little room to spare. Especially the adjustable back is very convenient.
By making the Chest Protector independent, it is possible to move around after getting off the Motorcycle without Stress.
It is very convenient.
View detail
Used for DEGNER Riders
Purchased to replace the Protector that came with DEGNER Riders.
The L size was just right for the M Riders.
View detail
If you are thin, you will drop down to your stomach.
I used it on an off-the-shelf Racing suit, but there is a gap in the tummy and it falls down to the bottom of my stomach.
It would be nice if the situation did not allow for a gap in the chest at all times, but this problem would not occur if the Type was shoulder-mounted, so it should have been that way.
View detail
Stack them up to increase defense!
Was the one you received as per Image?
At first glance, it looks like a slightly hard urethane sponge, which may seem a little uneasy to protect from the impact of an accident, but it is certified under the European standard EN1621-3Level 1. [Color] Since it is Clear, the performance is probably guaranteed to a certain extent.
[How did you feel about the Fit?
I usually wear Komine's JK-574 full year touring jacket Rama II, and although this jacket originally had a Chest Protector called SK-689 Inner chest guardSF as Standard Equipment, I have not used it. The SAS-TECChest Protector is a thin plastic and urethane foam protector, so I use it over the SAS-TECChest Protector. I don't end up using the special bag that comes with this product. 2 layers of Chest Protector gives me some pressure when I put on the jacket, but I don't mind it while riding.
How was your experience with it?
The Protector is somewhat stiff when cold, but becomes quite squishy and soft when warmed by body heat. It is good that the Protector fits to the body shape, but I am concerned about whether it can really protect the chest area. Impact "surface" I guess it's fine when you take it in the "point" I feel that it is quite bad when the product is subjected to a The fact that there are holes all over the Protector to ensure ventilation also makes the impact "point" The "M" in the name of the "M" is not supposed to be used in the case of the "M". For this reason, we thought it would make sense to use Komine's PlasticProtector on the front side and this SAS-TECProtector on the lower side (body side).
[Was there anything that disappointed you?
As long as we don't have accidents, we won't be disappointed, so we will strive to have no accidents!
How did it compare to other products?
However, since there was some concern about using it alone, we decided to use it in combination with Komine's Chest Protector by overlapping it on the underside (body side) of the Chest Protector.
View detail
For chest protection.
Since I have Power age Riding jackets for winter, summer, spring and fall, I purchased PA-539, which can be used for all of them.
It seems a bit expensive for the quality.
View detail
Focus on thinness
I was looking for something thin and soft, and after comparing with other manufacturers, I came to this one.
Although it does not say that it is ce acquired, it is said that it hardens when impacted, so we decided that its performance is sufficient.
This is a great product.
All Chest Pads are thick, and if you want a thin one, it is worth considering.
View detail
Relatively thin
[How is it used?
There are not many jackets that have a standard chest protector, so I used to use a separately sold integrated protector, but it was annoying, especially when I took it off.:Pair (for Left and Right) I bought this product in a separate body.
I always wear it when I drive.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is thinner than I expected and feels comfortable to wear.
I don't want to check on the effects.
The time and effort required to take it on and off is the same as with the one-piece system, but it is easier to take it off and hang it on a chair.
[Points to note]
Be sure to wear Chest Protector.
How did it compare to other products?
It is more comfortable to wear and take on and off than an integrated system.
I think it would be more popular if it were cheaper.
View detail
Buy to protect yourself.
I bought a new Ruffolo Jacket and an optional chest pad to protect myself.
This is a stabilizing measure in case of a fall or an accident.
It is better not to use it, but it is an insurance policy in case of emergency.
I think any Rufflo Jacket that is compatible with the chest pad is strong enough to be attached to the Large.
It is hard, light and easy to install.
It looks and feels like it will last forever unless there is an accident.
View detail
SAS-TEC is soft and reduces the pressure on the chest
It is a store purchase but Impression.
[How is it used?
It is worn in a Jacket with a chest ProtectorPocket for summer winter.
How was your experience with it?
SAS-TEC is soft and can be worn without much discomfort because it adapts to the body, and it becomes a pigeon chest when seen from the outside because it becomes a little thicker than HardProtector, but it is whether to allow there.
View detail
It's better than you think.
I bought this for my Mesh jacket. It's not as strong as the Brass Tic, but the fit is excellent. View detail
Light weight for Hard Type
I bought this because the Protector for my Raflo Air Through Parka was too thin and this is an OEM product so it fits perfectly.
Also, it is light for a Hard Type and does not make you feel heavy.
View detail
For everyday use
I'm very happy with the fit of the Image. View detail
This is a good product, light and strong.
Hokkaido Touring is being planned. "For God's sake, wear a jacket with a Protector on it. I bought a jacket with Protector for the first time in my 5 years of motorcycle history, and I also bought this jacket.
Fits the ProtectorPocket of Daytona's and Henly Begins' Jackets.
When it comes to Protector, CE Standard is famous, but this seems to be a product that protects with a completely different Approach.
It seems to harden upon impact. I understand that it's kind of amazing, but I don't understand the mechanism at all. The development of technology is remarkable. Well, I wore it a little for street riding, but I feel protected and I might end up driving more dangerously. I am going to be careful.
View detail
Easy to install, large and secure.
I bought this product to attach to my Thailand summer jacket, the Viento Air Jacket. The ProtectorBody can be removed from the Cover, so it is good that you can wash the Cover Only that is dirty with sweat. It is better not to encounter Situation to be able to confirm the extent of the effect, but I think that it is better to have less Damage to the body even a little in case of emergency, so I think that it will bring a good effect mentally to have a sense of security plus when I am riding. Considering that I buy a new one every few years, I appreciate this price. View detail
trustworthy
The Protector that came in the Mesh jacket was quite thin, so I decided to go Hard for safety.
It's nice because it's hard enough and has a large enough area to be protected.
View detail
ProtectorSingle Body with a bag is a little expensive.
I think.
At least if the entire front surface is Velcro and the position can be adjusted anywhere, but if you can do seamstress, it is better to buy ProtectorSingle Body and process it appropriately.
Let's try to put EmblemBase on the vacant Space for now.
The Protector itself is a little thicker than the CE1's and a little thinner than the CE2's.
According to DAYTONA, the load capacity is 50% higher than the CELevel 1 standard.
I hope you never get a chance to try it.
View detail
Reliable (?) JMCA recommended Chest Protector
Mesh jacket for commuting (Made by Alpinestars) It was used to enhance the protective power of
I've been using Mesh jacket for my commute for a long time, but recently I bought it because I suddenly started noticing that I wasn't using Protector at all.
I tried to install the L Size to the M Size jacket, but the size was quite limited.
It is recommended by JMCA, so you can feel secure about protection performance.
The Protector is designed to fit inside the jacket, so it won't flap around when you take it off or put it on.
(The Protector made by TAICHI that I use separately is a type that fastens with a Button, so it flaps around. https://imp.webike.net/article/321102/)
Compared to the Urethane that is installed from the beginning, there is a weight, but once you put it on, it is Level that does not bother you.
The downside is that it has a mysterious smell, probably due to the material used in the product... ・ I'm sure it will wear off with use, but it might bother you when you first start using it.
View detail
I'm concerned about the thickness of the Protector.
I bought this product to use with my leather jacket that does not have Chest Protector. It's a solid product, easy to use, and the Chest Protector is now universal. The only disadvantage is that the thickness of the belt is a bit large in addition to the thickness of the Protector. But I'll put up with it for the sake of safety. View detail
Protector is a must.
Cannot be used with Single Item.
This product must be used in conjunction with Spine Protector.
The Fastener on the front makes it easy to remove and install, but the center is unprotected.
As I wrote in the Spine Protector, the joint is too loose, so it's not good that it sometimes comes off.
View detail