Reviews
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX-R250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI GN125E, SUZUKI WOLF125, SUZUKI Street Magic 110, SUZUKI Street Magic 110II, SUZUKI RM80, SUZUKI RM80V
Large change
LargeThey are solid, and most importantly, they have a waterproof feature, which is great. I chose the size by referring to the size chart. I have done so in the past, but I tended to buy a Large size because I was worried about it. If I did so, all the lower part of the cover would be on the ground, and it would be difficult to put the cover on and take it off. Moreover, the cover itself gets dirty. This time, I chose a size a little longer than the overall length of my motorcycle, so it was just right. View detail
This is good!
until now U-shaped Lock When Chain lock." was used
The U-shaped lock could not be installed due to the large size of the wheels, and the chain lock was too heavy and inconvenient to carry.
This is the first time for me to use wire lock and I did not have large expectations from my past experience with the product. Let's try it …" I bought it with only a small amount of money, but when I saw the product I felt the quality when I touched it, and I immediately installed it on the rear wheel of my CT125 with the Motorcycle Cover on. (The first roll was put through together with the cover, and the second roll was put directly through the wheel only). The second roll was threaded directly through the wheel only.
In addition, since the lock part is a fitting type, it does not require a Key after locking, which makes it very easy to buy t.
Since I just started using it, I did not rate its durability at this time, but I thought it was the best lock for me and will repurchase it and use it on my GB350.
View detail
Fits: KAWASAKI Z1000J1, KAWASAKI Z1000J2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SE+, KAWASAKI Ninja H2 CARBON, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SE, KAWASAKI ZEPHYR1100 RS, KAWASAKI 1000GTR, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZZR1100(C)(ZX-11), KAWASAKI ZZR1100(D)(ZX-11), KAWASAKI ZEPHYR1100
For Accommodation Touring
I bought it because I stayed at a Blue Sky parking lot and got caught in the rain in the middle of the night on my Venus line touring this fall, and the next time I went on the Ise-Shima tour, I was also in a Blue Sky parking lot and got drenched with dew in the morning. View detail
Fits: HARLEY-DAVIDSON FLSTF Fatboy, HONDA VT1300 CR, HONDA VT1300 CS, HONDA VT1300 CX, HONDA Shadow Classic 400, HONDA shadow slasher, HONDA Shadow Phantom 750, KAWASAKI VULCAN 400 Drifter, KAWASAKI VULCAN 900 CLASSIC, KAWASAKI VULCAN S, SUZUKI Intruder LC250, SUZUKI Intruder Classic 400, SUZUKI Boulevard 400, SUZUKI Boulevard 800, SUZUKI Boulevard M109R, TRIUMPH Rocket III Roadster, YAMAHA VMAX, YAMAHA XV1600 Roadster, YAMAHA XVS 1300CA, YAMAHA XVS 950A
Soft and Fit feeling is very good
The 100% polyester material is softer than most commonly used materials and fits the car body better. The Harley-Davidson Touring model (without windshield) and the Side Back is available in quantity.:Pair (for Left and Right) The MODELs in the "1" can be covered with a donut. View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Easy-to-use Motorcycle Cover
It is smooth and easy to use. It is just a little disappointing that there is no aperture so it is easy to get wound up. I think Y's Gear might be better in that area. View detail
For simple theft prevention.
It is not a solid security measure, but it is for those who just feel like it.
It stretches a lot more than it looks, and it is not so bothersome to leave it around the Handlebar in everyday use.
I think the product is very good in terms of merchantability, texture, and appearance.
I think it would be good to use it to fasten luggage other than Helmet.
If you choose one simple product for now, I can recommend this product.
The Dial setting is a Type that presses a standard Button, so no one should have any trouble setting it up.
The feeling of turning Dial does not feel cheap either.
Having said that, if I were to steal it, would it be easy to cut it off? I think so.
For a solid security measure, we recommend the Helmet holder of Key Type.
View detail
Fits: SUZUKI Address V125G, SUZUKI Address V100, SUZUKI address V125, KYMCO XCITING250, PIAGGIO Runner 200VXR, KYMCO GRAND DINK250Z, HONDA Lead 90, HONDA Lead EX, HONDA Lead 110., HONDA Lead 50, HONDA Lead 100, HONDA Spacey 100, HONDA Dio 110., HONDA Spacey 125, YAMAHA Axis Street, YAMAHA Grand Axis, YAMAHA Axis 90, YAMAHA Cygnus 125, SYM RV180JP, HONDA PCX
Used with CROSS CUB50
CROSS CUB50 with 40? box and Size is just.
The quality is, well, in line with the price, and I have no complaints.
Easy to use with no Floppy with cords and ties to hem.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-8R, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZXR750R, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA YZF750SP, YAMAHA XV250, MOTOGUZZI Le Mans 1000, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FJ1200A, YAMAHA V MAX 1200, YAMAHA FZR400RR
Not bad, but …
I bought this as a cover for my Ducati Deer Bell v4, and although the size is exact, it is hard to tell the front from the back, and the SeatBack is wet, so I think the waterproof property is not so good. View detail
I can keep my luggage safe
Quality and texture information wires stretch well It can be used as a helmet lock for the feeling of use and can also be tied to the rear It's difficult to install Best for keeping cost performance and comparison luggage safe WeBike packaging is always great, arriving in a week for delivery and packaging Concerns When purchasing The wire is too long to be used for tying or fixing. The way to change the password is at the back of the package View detail
I like the logo
Purchased and installed a Tanax rear bag as a replacement for the top box.
I ended up purchasing it.
I purchased it for the zipper lock and rear bag theft prevention purpose.
Despite its small size, it is sturdy and I really like the design.
In the attached photo, it is installed and fixed on the front of the rear bag. -------------------------------------------------- -------- While buying a Tanax rear bag as a top box substitute I bought it. I bought it for a zipper lock and rearbag theft prevention Compared to the smaller size, I like the design and the design very much. It is fixed after mounting it on the front of the attached photo rearback. Powered by Google Translator
View detail
Zipper makes it easy to put on.
The front is zipper, so there is no Stress to take it on and off, and I can't use anything else anymore.
Since the front and rear are different colors, the orientation is quite clear.
The fabric is not PeLePera but solid in its own way.
I set the L size on YZFR3, but I feel that the Rear floats a few centimeters and I can see the edge of the Tire.
Maybe it is not made for SSMotorcycle with the butt up.
I feel like this one is fine because it is breathable,
For those who want to hide it completely, I think it is better to raise One size.
Exhaust system is durable even if it is hit by Large,
DAYTONA's Heat Seat is attached.
View detail
Tank Bag used to prevent theft
Used to prevent Tank Bag theft in case of emergency.
By attaching the wire to the handlebar, and depending on the model of the tank bag, the lock portion can be inserted into the fastener to prevent theft of the tank bag and the fastener from opening and closing, thereby preventing theft of the items in the tank bag.
The coil-type wire and lock are compact, so they do not get in the way and are just right in terms of size.
Although the locking part seems poor, it is far more secure than unlocked and unprotected.
View detail
Fits: KAWASAKI Ninja ZX-4R SE, SUZUKI V STROM 250SX
For Overnight Touring
I bought this for overnight touring.
Since we use GIVI's Top case, we have no trouble carrying it around, so we chose one that looks sturdy and has a good impact.
It is quite heavy in hand, so it may be good for use at home, but it may be very difficult to carry it on touring etc. without a hard case.
Also, the keyhole has a sliding lid to prevent rainwater etc. from entering.
The LED light attached to the key is not so bright, but it is very useful to see the keyhole of the main key as well as the keyhole of the U-shaped lock at night.
Since security goods are also used to keep thieves away, we recommend that they have an impact on the appearance.
View detail
Fits: YAMAHA YZF-R3, HONDA CBR500R, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R1M, YAMAHA YZF-R1, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, HONDA CBR650R, HONDA CBR400R, HONDA CBR250RR
Attachment and fit is superb. Security is.
[How is it used?
...Purchased on October 5, 2023 for about 1 month. With rainfall
Was the one you received as per Image?
The product is exactly as shown in the image.
How was your experience with it?
As described in the product description, the cover is easy to put on and take off thanks to the large opening SIDE.
Since the vehicle can be checked only by opening and closing the SIDE zipper, I feel that it is easier for uninformed people to check the inside of the vehicle compared to the Cover, which is completely covered.
As the claim of "Fit", it covers from Mirror to Tire completely and just right.
Black, so a little dirt is not noticeable.
Resistant because it has not melted even if Cover is applied immediately after returning home.
The puddling of rainwater between Mirror and Stem that occurred during Y’S GEAR did not occur.
I need to fix the anti-slamming Belt at the bottom, so I have to bend down and stretch my arms. At that time, I am afraid of contact with the Exhaust System.
Fastener easily chews through the Orange fabric covering the fastener, so be careful.
Not rated because I am of the school of thought that locks do not go through Cover.
[Points to note]
Avoid contact with the Exhaust System when installing the Belt buckle.
How did it compare to other products?
*Comparison is Y’S GEAR, which was repeatedly used on a yearly basis. (YAMAHA) :Motorcycle Cover E Type (https://www.webike.net/sd/24026744/)
Attaching and detaching the Cover is easier and less time consuming with this product.
The front and rear strings can be pulled to secure the device in place. This product is mainly mentally scary.
Fit feeling was better with this product, and the weight of the water did not cause puddles in parts of the product to dip under the weight of the water.
The thickness is thicker and seems to be more durable.
The price of this product is often less expensive when discounts are taken into account.
The manufacturer that sells the Cover has the same appearance (Silver base with Blue front, etc.) for various targets such as Scooter, but this manufacturer sells only this Cover with the exception of the Inner, and it seems that this manufacturer's Cover has no security function that prevents identification of the vehicle type. However, this manufacturer sells only the Cover, except for the Inner, and the Cover of this manufacturer does not seem to have a security performance that does not allow the user to identify the model of the vehicle.
[Opinions and requests to Manufacturer
I would feel more comfortable if you sold Covers for various types of motorcycles, not just sports type motorbikes. (https://www.doppelganger.jp/product_list/cover_motorcycle/)
The ease of attachment/detachment and the fit of the vehicle are highly satisfactory as described in the product description. On the other hand, the ease of attachment/detachment and the fact that the security performance is inferior to other Covers due to the narrowing of the vehicle in the Cover state are a little scary.
View detail
Fits: HONDA SPACY100, HONDA SPACY125, HONDA LEAD110, HONDA LEAD50, SUZUKI ADDRESS V100, SUZUKI ADDRESSV125, Vespa PESPA 125, YAMAHA AXIS 90, YAMAHA CYGNUS 125, YAMAHA CYGNUS 125SR, YAMAHA CYGNUS 125X
Size don't fit in SUPER CUB with box!
Since we installed a box on the CUB, we replaced the Cover with a Size one that can also be used with a box.
I am happy with ExactlySize on a CUB110 with a 32 liter capacity box from GIVI.
As others have mentioned, it is a little minus that the fabric is thin and rainwater will pass through.
However, we feel that it is sufficient for the purpose of preventing degradation of resin parts due to UV rays.
Above all, considering the price, I have no complaints!
View detail
very good
We have a new Cover for the installation of the Homsen box.
The Homesen box is used with the RV460 made by IRISOHYAMA attached, and it can be attached and detached without difficulty. I use it with Center Stand and Handlebar Lock.
Not used when Side Stand.
I am using a U-shaped lock on the rear wheel, but the fabric is a little taut and difficult to install. It might be better to have a little more room. The holes could be positioned a little further back.
I run the Cover immediately after driving and so far it has not been burned by the heat from the Exhaust System (OEM).
The fabric is thick and tear-resistant, and I think it can be used for a long time.
I think it's a very good product
View detail
The game is how to make the enemy's will to fight disappear!
LargeSmallAfter installing various locks, we finally have 6 locks. I think now the unscrupulous person has lost his will to fight. How to make them spend time and effort? If you can make them think, "This is too much trouble," just by looking at them, you have won! Even if you spend a lot of money on parts, oil, exhaust systems, tires, helmets, jackets, gloves, boots, etc., it is meaningless if you lose your motorcycle. First of all, let's use our gold and wisdom to protect our large and precious partner. View detail
Good value for money and the ability to lock securely in place!
The quality is good enough to protect your motorcycle, and the cost is also good. I think that the most important thing is to make the enemy lose the will to fight, so you should not rely on this alone. I think it's important to have a good quality and good cost to protect Motorcycle. This makes 6 locks. View detail
Very easy to use
Very easy to use
You can put it in your Pocket and use it quickly and easily when you need it.
Wire length is just right!
If you have one of these, you can use it on other motorcycles,
This eliminates the need to purchase and install helmet locks for each car model.
For people who ride more than one Motorcycle or change Motorcycles regularly,
I think it's a very good product
View detail
Fits: HONDA CB125R, HONDA CB250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250R, YAMAHA NMAX155, YAMAHA YZF-R3, YAMAHA MT03, HONDA CB300R, HONDA CBR500R, HONDA CB150R, YAMAHA CYGNUS X125, YAMAHA MAJESTYS, YAMAHA CYGNUS X, YAMAHA YZF-R25, YAMAHA Zeal, YAMAHA YZF-R125, YAMAHA TZR250R, YAMAHA SR500, YAMAHA SRX400, YAMAHA SR400
I'm generally satisfied!
I purchased the L Size for my CB250R for about half the list price.
The compatibility chart lists CB250R as L Size, but in reality I felt that the Motorcycle Cover was a little short in overall height.
Specifically, I am worried when there is snow on the ground because I can see a little of the Wheel in the back as shown in the photo. (I guess I am too nervous).
The front Wheel is also hidden when the Cover is extended all the way to the end, but it may shift and stick out a little in wind or other conditions.
For now, we decided to wait and see until spring.
However, we are otherwise satisfied with the Large change in use.
I especially like the waterproof and moisture-proof feature. I used to use their Motorcycle Cover Kizuna on my previous Motorcycle, and when I compared the product descriptions on the Package, the only difference is that it has a flame retardant finish, but the flameproof Motorcycle Cover Kizuna does not allow water to seep through to the Cover in normal rain, and I felt that it has a higher moisture-proofing function. However, I felt that the flameproof Motorcycle Cover Kizuna has a higher moisture-proofing function. (This may be the difference in the number of years of use.)
We recommend buying the fireproof bond because there is no LARGE difference between it and the unbranded bond at the current Net price.
View detail