Reviews
A vital tool for a specific task
Easy to apply the rim stickers with this tool. A couple notes- firstly; absolutely perfect application of the rim stickers was impossible for me. But it's close enough that I'm probably the only one who will ever notice. Secondly: wheel balance weights will obstruct the use of this too & a degree of freehand sticker application will be required, it's not difficult though. View detail
Yamaha tappet adjuster 3mm
Original YGP. Fast shipping 3 days from mailed date to Singapore . Package bubble wrapped to ensure no priduct damage during shipping. View detail
Ideal for NAKED's Engine area!
As per the Title, it is ideal for cleaning around the Engine of Naked motorcycle!
I have been driving a GSX1400 motorcycle for 16 years. The front side of the engine is hard to clean because of the oil cooler, exhaust pipe, oil line, and oil filter, and I have half given up on cleaning it.
However, I didn't want to leave it like this, so I was looking for something better and found this.
I purchased this product expecting it to work as well as it looked, but it was even better than it looked!
The size is a little large and the core wire is hard, but that is good!
A 1400cc straight-4 Engine is wide, and being wide means that it takes a certain amount of force to shove Brush into it and scrub it.
LargeSize and hard core were exactly Exactly for my use.
Also, the core Wire is not very thick, so it will properly fit into the gap.
After washing the car using DAYTONA's Shampoo in combination with this, Engine has regained the beauty of its original black paint!
This is highly recommended for those who want to keep Naked motorcycle's Engine appearance beautiful!
View detail
I found it difficult to use myself.
Maybe I am clumsy, but I was able to apply it more neatly when working with FreeBand. If you are dexterous, this is a good product. View detail
It would be useful to have when pinching round objects with Vise
I had only had a Mini Vice until now, but when I needed to do some welding, I bought a medium sized Vise. I bought it because I thought it would be useful.
I wish the material was sized to fit the groove of this product, but it is a little difficult to use when the angle is not right. Also, this product has a strong magnet that sticks to the vise, but it is a little troublesome to use it after aligning the teeth of the upper and lower jaw because the teeth of the upper and lower jaw seem to be misaligned and the tooth sides are not aligned properly.
So, it is not suitable for all purposes, but there will be several times in a lifetime when it would be very convenient to have it. The color is Kawasaki green, which I personally like, but there is no Kawasaki motorcycle at the moment, so I am not sure.
View detail
For crafts
Purchased to secure aluminum plate when cutting out and drilling holes
It is working as expected.
View detail
Seriously, Garbage.
It was fundamentally broken after 1 shot of use! Seriously Garbage. View detail
As a test
PlasticCleaner, I bought it to try it out because it seemed to have good reviews. The price is not that high, but the quantity is not too much.
It seems to be good for some Small scratches and dirt removal.
View detail
Well done!
I honestly did not expect much from a reasonably priced product, but it is well made! The rubber strap is too long, so I recommend cutting it and sewing it lightly by yourself to make it more comfortable to use! View detail
High quality at a low price!
I like that it is affordable and can be easily replaced with high frequency! In places where the dust is great, two layers of Filter can be suffocating, but it is a recommendation because it further coughs up the dust! View detail
Swing Arm scale is for reference only
As the title says, the scale on the Swing Arm is for reference only.
I was looking at Motorcycle from behind and noticed that the teeth of Sprocket were somehow closer to the body side of Chain.
Quantity in the Swing Arm scale:Pair (for Left and Right) The position of Chain and Sprocket is not good, even though they are in the same position.
The Chain Alignment Tool was used to straighten the Chain, and the alignment between the Chain and the Sprocket was perfectly aligned, and as a byproduct, the Swing Arm scale was set to "Quantity:Pair (for Left and Right) We found that there was a Gap of about 2-3mm in the
If the alignment of the Chain is not correct, it can cause uneven wear of the Tire and damage to the Sprocket and Chain.
This is a Tool of Recommendation for those who are interested in getting ChainAlignment right!
View detail
Great tweezers
Love these so far. They are a great build quality that feels sturdy in the hand.Works great and made from metal so it's more environmental and sustainable material. Pleased I avoid buying another plastic tool.definitely recommend View detail
Lining Peeled Off Tool, but also useful for peeling off the exterior
The product name is Lining Peeled Off Tool, but it is also useful for removing the exterior.
There are two types of shapes, and the principle of leverage makes it easy to apply force, but it is likely to break if force is applied too much.
It's better to break it before the exterior cracks, though,
PushPins and other difficult-to-remove items can also be removed.
When using the product, cure the contact surface with Curing Tape, etc. before use.
View detail
Nicely made and very useful
Pretty good at holding motorcycle parts or softer metal you don't wish to mar with the vice teeth. I purchased 2 different jaw pads. Plastic and metal. All were very similar. They give multiple ways to hold part secure with damage. Good quality and durable. Retention magnets are weak though, slight bump and they fall off the jaws. Holding round rods at an angle or parallel to the teeth, not so much. They will warp if given too much torque. View detail
should have got these a long time ago,Great product
Nice tools from KTC. They are well made and effective. They wood handle is nice and the packaging serves as a storage case for them. these are amazing! These little gasket scrapers work great. I actually prefer them over most other kinds in my tool box. Ive used them on everything from bikes to jeeps to and they have always worked pretty good. you just need to be extra careful on aluminum gasket surfaces with them. Since they are steel they can gouge your aluminum gasket surface if you dont know how to use them and not careful. View detail
Universal Product
I bought it to clean the parts that were soaked with oil.
It may be a little soft, but I will adjust it by cutting it a little.
View detail
Suitable for portable, not stationary
Purchased to adjust air pressure at Circuit.
Since the capacity is small, filling a single tire is not efficient because the air runs out. TradeOff is unavoidable if the limited loading space is to be used effectively.
It is not a quiet Type and is not suitable for home use.
The 100V power supply type is perfect for use as a portable Small Type Compressor with a generator.
Other negatives are reasonable considering the price and Size.
View detail
Finishing touches change with tools.
[How is it used?
I am always playing and playing with Enduro on my off-road motorcycle. I am not a very good rider, so I always try to keep my motorcycle beautiful. If I am not a good rider and my motorcycle is dirty, I can't even look at it.
WAKO:Wako's Car Wash Brush for everyday car washing PP Predecessor (https://www.webike.net/sd/23289227/) I used to wash the garnish with this and wash the details with some random Brush around the place. I found this product that looks like it would appear in an Insta car wash video, so I bought it.
Was the one you received as per Image?
Brush is softer than I expected. Material seems to be poly.
How was your experience with it?
I think it is just right for around the LINK. I think it is a good idea to brush areas where you don't want to apply too much high pressure to prevent Grease from leaking out.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a RECOMMENDATION because a serious car wash will not only keep your car Beautiful because it is easy to find places that are poorly maintained, but it will also prolong the life of your Motorcycle. It is good to have the right tools to make it fun.
View detail
Car wash is a tool
[How is it used?
I play and play with Enduro on my Off-road motorcycle. I am not a very good rider, so I always try to keep my motorcycle beautiful. If I am not a good rider and my motorcycle is dirty, I can't even look at it.
WAKO:Wako's Car Wash Brush for everyday car washing PP Predecessor (https://www.webike.net/sd/23289227/) I used to wash the garnish with this and wash the details with some random Brush around the place. I found this product that looks like it would appear in an Insta car wash video, so I bought it.
Was the one you received as per Image?
The bristles of the brushes were stiffer than I had expected, but not too hard. The material seems to be made of pig bristle.
How was your experience with it?
It is best suited for washing the top bridge and other in-built parts of the car. The bristles are pig bristle and soft, so it is also good for use around the meter of on road vehicles.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a RECOMMENDATION because a serious car wash will not only keep your car Beautiful because it is easy to find places that are poorly maintained, but it will also prolong the life of your Motorcycle. It is good to have the right tools to make it fun.
View detail
I was able to exchange Spring with peace of mind.
A special tool is required to remove the rear suspension spring.
There is a special Type tool that attaches directly to the spring and shrinks it, but I fear that it may come off when tightened and the special tool may fly away.
This special DAYTONA tool was able to work safely and stably because it uses ThailandBelt to tension the springs and fix the rear suspension mounting points.
In the actual work, a special tool is used for Rear suspension in quantity.:Set to shrink the Spring and remove the Lockling at the bottom end.
The spring replacement is completed when the new spring to be replaced is shrunk in the same manner, and the Lockling is attached and put back on.
The work was comfortable using solid, specialized tools.
It is a dedicated tool that is used only very occasionally, but it would be nice if the price were lower.
View detail