Reviews
I wanted to do the installation with two people if possible.
No evaluation of effectiveness will be made.
Please use your own sensitivity to decide whether you believe in Yamaha's development, or whether you think this will predict the effects you think it will have.
According to Yamaha's instruction manual, the installation time for this part is 0.3 hr. but it was
It took me 1 hour and 30 minutes, including cleaning up after the tools (installation is over an hour...).
There are some parts that can be easily damaged (around the brake switch, for example), and the CanisterBracket can be used on both the upper and lower sides.
Or removing it....
The most difficult part was the installation of the parts, where I had to hang the Torque on a large piece of wood. Bolt/Nut. and
I was careful not to lick Bolt's head because the torque wrench is a one-handed operation.
It might be better to work with two people if possible.
View detail
interference
When installing on JA60 YOSHIMURAExhaust System Up Type
Even if the exhaust system can be installed due to interference between the frame and the exhaust system, the blanket of the headlight portion will also be at an angle, so it cannot be installed neatly.
I put Washer in the footpeg position to adjust the height, but it didn't make sense.
If a washer is inserted, the Blanket position in the Headlight section will not be aligned.
The Exhaust System and Frame are always interfering with each other. I am OK with it because I value the appearance.
I would like to see a compatible product.
If you don't want to add Exhaust System Up Type, I can recommend it because it looks great Parenthesis.
It's like the CROSS stock has evolved from a monkey to a GORILLA. (Lol)
View detail
operability
The Frame feels less fluffy and feels like it can be operated TIGHTLY without blurring. The sense of security has increased. View detail
Can also be installed with MORIWAKIShortMONSTER S2 at the same time.
Was the one you received as per Image?
Although the price seems quite high, we choose this Manufacturer for future expandability over similar products.
Quality is, of course, also reliable and high quality.
Was the installation difficult?
First of all, the Exhaust System was replaced with ShortMONSTER S2, so we purchased it after referring to the images of the installed car to see if it could be installed.
I want you to look at the picture of God Clearance.
The installation itself can be done in about 30 minutes if you have the energy to crawl on the ground.
How was your experience with it?
I am more satisfied with the fact that the body looks large than with the engine protection.
However, the bolt is not a part that is finished once it is installed, as it seems to be held in place by a screw, so I think it is necessary to retighten the bolt periodically.
Installation Point or hang
The Corrugated Cardboard that contains the product is used as a matte. (Lol)
View detail
The silver subframe looks great.
I considered the black color, but I chose silver.
The side view is even better with the subframe shining.
The finish is excellent. There was almost no processing error and it seemed to be worth the price.
When installing, note that the bushings entering the frame are different on the left and right.
I thought about it before buying, but I have no regrets. -------------------------------------------------- -------- I considered the black color, but I chose it as a silver. The subframe is shining and the side is even better. The deadline is excellent. There was almost no processing error and it seemed to be worth it. Be careful to install the bushing that enters the frame when installing is different. I was worried before buying, but I do not regret it. Powered by Google Translator
View detail
While retaining the OEM design
Recommended for those who do not want to break the OEM Forme, but want to make some changes.
The weight, which is also a concern, is slightly lighter than the OEM, although it is a sturdier design.
The installation accuracy of this product is also high because of the distortion of the body of the car.
No complaints, but one thing, the paint is sweet, it is thin.
During installation, a slight drop on the Asphalt will scratch the paint.
How about this?
Can't you make the paint film a little thicker?
I painted the wound with Magic.
It's really just because everything else is so good. Nice try."
When installing on the car body, all screws must be temporarily attached to the car body.
Retightening!
The body of the vehicle is distorted, so time is wasted on installation.
View detail
Satisfied with the product,...
I am very satisfied with the product itself, including the color of the sub-frame and its appearance after installation.
However, the seal on the text portion is too cheap for the price.
Since it is a commemorative MODEL, it is attached to the Aluminum Plate with Transfer Sticker, etc,
I think it could have been a little more special. I feel that it would have been better.
I bought it for the purpose of dress-up, so I don't know if there is any change in rigidity.
View detail
OVER Racing ?
First of all, I wanted one just by looking at the photos of the presentation, so I placed an Order that day!
I waited over 2 months, but when I received it, opened it and picked it up, I was Large satisfied with the quality of the finish and rigidity.
When installed, it has a luxurious feel and surprises everyone who sees it.
I think it is over-quality for the CT125, but I am glad I purchased it just because I am more than 100% satisfied.
View detail
Standard modifications
Silver is cheaper but the color MATCH feeling is Black.
The person wearing it is Large body Polished aluminum.
Matching good with Engine Black.
Quantity:Pair (for Left and Right) Note that the color thickness of the "Color Thickness" is not the same in some areas, so be careful when installing the product.
The sub-frame per-frame surface will float.
View detail
Black Match the vehicle
Stiff but relatively lightweight, with a casual dress-up look. View detail
Obvious effect
My motorcycle is YAMAHA NMAX155. Recently I saw webike put the PD pull rod of this NMAX155 on the shelf, so I immediately placed an order to buy it. The installation is still a little difficult, so I need to go to the repair shop for installation. After the installation of driving texture has been significantly improved, the effect is very good. View detail
Not sure how well it worked...
[How is it used?
Street Riding and Touring
Was the one you received as per Image?
Exactly as pictured.
Was the installation difficult?
The instruction manual is well written, so there are no problems when installing the unit according to the manual.
Torque management is to be installed in such a way that it is firmly protected with a Large cut.
How was your experience with it?
I installed it right away when I took delivery of the car, so I couldn't tell the difference in effect....
However, the mounting part is also the part that makes the car run smoothly, so it is important to keep it in place.
I think Shock absorber is doing its job....
The rest of the time, I think it is highly evaluated as fashion parts because of its good appearance and processing.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Vibration mitigation
The YAMAHA Performance PD puller is a great accessory to buy. This puller is complicated to install and requires a professional shop to install it. The actual experience was very good, with less vibration, more stability and improved overbend support. All in all, it's worth it. View detail
reduce body vibration
My motorcycle is a YAMAHA TMAX560. This bike has some annoying vibrations when driving, so I bought this YAMAHA Performance Damper on webike. It is a flagship product designed by YAMAHA. It is used on many performance cars Equipped with equipment, it can effectively suppress the vibration of the vehicle and improve the driving quality. The installation is a bit troublesome and many car shells need to be removed. It is recommended to go to a professional car dealer for installation. -------------------------------------------------- -------- My motorcycle is Yamaha Tmax560. When this car is driving, there will be some annoying shocks, so I bought this Yamaha Performance Damper on Webike. With equipment, it can effectively suppress the vibration of the vehicle and enhance driving texture. There are some troublesome installation to remove a lot of car shells. It is recommended to go to professional car dealers for installation. Powered by Google Translator View detail
The effect is definite.
It is definitely effective against vibration.
My butt used to itch when cruising at high speeds.
After installation, it was LARGE and no longer a concern.
Straight line stability is also good. It feels like it has become stickier.
The rider's spirit is also a large part of it.
It is also possible to drive down the road for 23 hours.
Sticker is Sporty.
I'm Arrangement because I thought it wouldn't fit in SR.
It is quite Large strange to peel it off because it is perishable Brown bitter Brown stubborn.
After installation, I'm quite enthusiastic.
Around the fixed Bracket after using it for a while.
Noticeable color fading; HEPCO & BECKER's
It seems to be quite incompatible with Engine Guard.
Simultaneous installation is also possible in a manner of speaking.
View detail
Focus on appearance
I installed it and honestly cannot tell how rigid it is. However, the Handlebar and Seat feel stiffer than before. Setting of front and rear suspension is necessary. Installation itself is easy. If you change the order of the instruction manual, you can do it without Jack-up, but Center Stand or Maintenance Stand is indispensable. I am not a fan of XJR, but I like XJR even more now. View detail
Mostly satisfied!
In city driving, I can no longer feel the vibration to my buttocks at traffic lights. On the highway, I could feel the difference from before the installation. I recommend it to those who often do one-day long-distance touring using highways. I think it will reduce the feeling of fatigue. View detail
Recommended
Less vibration!
Custom feeling is improved, vibration is reduced, and long distance is easy!
Half the price of a Manufacturer!
I don't know what it looks like.
View detail
fine parts
My motorcycle is a KAWASAKI Z900RS. The bumper I bought elsewhere was big and thick, not good-looking at all, and very heavy. I repurchased this OVER RACING side engine bumper on webike, this one is made of aluminum, strong and light. The shape is also handsome. Webikie shipped very quickly, the packaging is in good condition, and will repurchase. -------------------------------------------------- -------- My motorcycle is Kawasaki Z900RS. The barrier bought in other places was big and thick. It was not good at all, and it was very heavy. I re -purchased this Over Racing side engine bumper on Webike . This is made of aluminum, which is strong and lightweight. The shape is also handsome. Webikie is delivered quickly, the packaging is intact, and it will repurchase. Powered by Google Translator View detail
perfect accessory
My motorcycle is YAMAHA NMAX155, and my other bike XMAX300 is equipped with Performance Damper rods, and the effect is very good. Recently, I saw this NMAX155 PD lever on webike, so I quickly placed an order to buy it. It is still difficult to install, so I need to go to a repair shop to install it. After installation, the driving texture has been significantly improved, and the effect is very good. View detail