Reviews
Easier Knee grip
This will be a reReview.
Immediately after delivery, only the side cover was attached, but later the tank side was also attached because the legs hit the tank side when the vehicle body is supported by the outer legs with the ass shifted, such as when driving on a mountain pass.
The positioning was done without any particular instruction manual, and the position of the legs was determined by straddling the tank, making sure not to miss the point where the legs hit the tank, and fine-tuning the position so that the line of the tank would be consistent with the line of the tank.
As with the Side cover section, when attaching, peel off the backing paper gradually to prevent air bubbles from entering, and apply it from the center outward in a way that releases air.
Although I am rather clumsy, I think I was able to apply it reasonably neatly.
As a result of driving on the pass, the Tank was well supported during Cornering and had the expected effect.
Especially in the forward leaning posture of SS, it is somewhat easier to support the upper body by having a good knee grip.
As I wrote in my last Review, [Color] Even though it is called Clear, I am a little dissatisfied with the Cream coloring.
A little more transparency would be nice without destroying the design of the car body.
View detail
Only the positioning bothers me.
In the meantime, I am worried about positioning.
The Tank itself is rounded, From this line ??mm" It is difficult to decide on something like Quantity:Pair (for Left and Right) I thought I had it exactly in the same position, but when I straddled it after applying it, it was a little Quantity.:Pair (for Left and Right) There's a difference … and so on.
The center part is aligned from the end of the Seat and overlaps the logo mark, so the back part is aligned from the front of the vehicle and placed under the Seat.
I think if a simple positioning jig or something was included, I would have been able to apply it accurately without worrying.
In terms of performance, it is quite Good thing you put it up." Before I put it on, my feet used to slip off the tank even if I did a knee grip, but after I put it on, I can do a firm knee grip and it is very good.
I thought the Black Rubber on the Silver Tank would stand out, but personally I think it looks rather better with a bit of Accent.
I wrote about the pasting, but overall I am satisfied with it.
View detail
Fits: YAMAHA DT 125 R, YAMAHA TW 200 TRAILWAY, YAMAHA XT 600, YAMAHA XT 600 Z TENERE, YAMAHA XTZ 660 TENERE, YAMAHA XTZ 750 SUPERTENERE
Fuel Cap was a functional component.
Unexplained stall.
Idling with the fuel cap on 。 Engine stop after a while 。 No matter how many times I try, Engine stops.
Now, with the fuel cap removed, let it idling. 。 This time, Engine shows no sign of stopping.
The cause of the glitch is. Fuel cap intake clogged." It was
It is not easy to understand,
If you smell Gasoline from the Tank, be careful!
And the tank cap is a consumable item! It was an old body we bought used, so it probably should have been replaced.
In the case of automobiles and motor cycles, the structure of the fuel tanks allows some gas caps to play an important role 。 In order to move gasoline out of the fuel tank (to a carburetor, etc.), the volume of the gasoline that has been moved must be replaced in the fuel tank. To explain this in a simple way, this is the principle of how a cup of pudding comes out of a cup. 。 The volume of liquefied gasoline in the fuel tank increases dramatically when it vaporizes, and since the volume capacity of the fuel tank is fixed, the fuel tank may expand to its full capacity if the increased volume is not taken out of the fuel tank. 。 It is not likely to rupture, but when the gas cap is removed and the internal pressure builds up, like a Champagne bottle opening, that is when it happens.
And Packing, especially inside the Gasoline cap, is constantly exposed to evaporated Gasoline, which causes Rubber's Packing to deteriorate.
If the packing is not sealed properly, a lot of evaporated gasoline will leak out. This is what happens.
After replacement .......
No more stalling.
good point
◎OEM compatible, so it can be firmly Cap.
◎Rubber packing texture is as durable as OEM.
◎Easy to manage with Key.
A component that is often forgotten, fuel CapPacking seems to be a regular replacement part. After years of use, it can become thin and lose its seal, and cracks can appear countless times due to deterioration, so when you notice such packing, do not hesitate to order new parts.
If you don't want to replace the cap itself, you can buy just the packing, so please give it a try.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It looks Cool.
Purchased as points were accumulated,
It's just a look, but it's Cool's.
I think it is nice because it is in your line of sight when you are on it.
Simply apply it after cleaning and degreasing with Parts cleaner.
View detail
Mounted on EC250
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
The Hose stuck in the Tank allows Gasoline to flow back into the HeadBike when it falls over.
In this case, grease around the Stem will drop, causing Rust and worsening Handling.
This cap is available in a lineup of different colors, and it is a good part with an easy customizable feel.
However, after two rides after installing it, it came off when I fell down somewhere or lost it.
I ended up buying a second one right away, also in tears.
View detail
Genuine Yamaha Fuel Tank Pad for MT09
This was something I had been meaning to buy but never got around to it. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue although I pre fit with low tach tape to get the placement visually before starting. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Looks good and lightweight.
It looks great and is lightweight, but the Tank's mounting accuracy is not very good, so some machining kills are required.
Side covers in particular do not fit properly without machining long holes.
After Color:The unpainted condition has several small holes and the surface is not clean, but it can be covered depending on the skill of the painter.
Even without that, the Parenthesis in its installed state is excellent.
It is now half as light and rust is no longer a concern.
View detail
What are the effects, not just the appearance.
Just by putting it on a normal tank, it can be easily transformed into a cafe racer style.
The effect on the appearance of the product is extremely Large, but there are other Large effects as well, so let me introduce them to you!
Originally, Tank Cover is a product to cover tanks, which was born out of the European motorcycle culture.
With a wide range of color variations, this is the perfect makeover for your car.
What does it mean to put a Cover on a Motorcycle Tank? A Cover attached to a tank is not exactly "Tank Pad These items are called "tanks" and are mainly used to prevent scratches on the tanks. They are also sometimes used for a dress-up effect.
Effects of each.
The most important reason for installing the Tank Pad is to prevent scratches on the tank, which is often caused by rubbing against the Zipper, Belt Bracket, Jeans, etc. The area that comes in contact with the Rider's crotch is often scratched. 。
The rear end is raised in a large size, and the forme with a good edge improves the hold of the inner thighs and the machine in the hanging on posture, etc., and realizes more aggressive machine control. This means that the Knee grip is easier and machine control is improved.
It is effective for forward leaning vehicles such as Continental handle and Separate Handlebars.
(3) By attaching the Tank Pad to the tank, it prevents the tank from being scratched and prevents it from slipping, making it even easier to get a good grip on the knee.
good point
The tank is simply placed over a normal tank, and the fueling port hole is also intact, making it easy for beginners.
The shape of the lower part of the tank cover has an egri, which makes it easy to get a good knee grip. It also has a dress-up effect.
(3) Just put it over the Normal tank, so if you miss the Normal tank, just take the Cover.
(4) Of course, it can also prevent scratches on normal tanks.
? Effective in preventing slipping when used in combination with Tank Pad.
As a result, it is more cost-effective than replacing the tank with an aluminum tank or an external tank, because it can improve the press-up and machine control while keeping the normal tank.
I am glad that the knee grip is easier than it looks, as a lightweight motorcycle is ideal for a person and car as one.
I painted mine, but I think it would be cool to put a sticker or something on a plain black one.
View detail
comfortable tank pad
About quality and texture : very comfortable and soft About the feeling of use : increases our grip during rides Products to buy together : none Difficulty of installation : very easy, just remove stickers and stick to tank Cost performance and comparison with other products : higher price due to good quality About shipping and packaging : neatly packaged, fast shipping Any concerns, cautions, or advice when purchasing : clean the tank surface before apply tank pad View detail
Fits: Others , HONDA GORILLA, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA APE 50, HONDA APE 100, HONDA BENLY50CD90, HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, YAMAHA XSR125
Good pads!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI Z400, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Z250, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250
Genuine Kawasaki Tank Pad (3 piece)
I have said this before and this is something every fuel tank should have on them from factory. Fortunately, no scratches to cover on this beautiful tank. No need to tempt fate so I just thought it best bet for now to get a tank pad. This will help stop any scratces and abrasions from the jacket etc. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Kawasaki one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Kawasaki packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. Fitting was straight forward and when on without issue. As this is a 3 piece tank pad, you should really mock up the fitting beforehand so you know where it will sit once you remove the backing. Easy if you take your time. No one wants to have a constant reminder that they messed up with a wonky set. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail
Best Match for 2022SPMODEL
It is one of the cheaper carbon parts from Magical racing, but still a high-end product. The line is perfectly aligned with the top of the tank, so it does not look like an unfortunate afterthought. The 22 year color has a lot of silver area on the tank, so it looks tighter with the new parts.
I can especially recommend this for the 2022-2023 SP body.
View detail
Tank Pad
The price is high because it is an OEM product. It is normal. View detail
Fits: GPX DemonGR200R, GPX DemonGR200R Dacorsa2, GPX DemonGR200R 4V
I got the wrong item
The product spec. seems to have been changed and I received a product different from the picture. 。 I sent an email to WEBIKE saying that if I received the wrong item, I could have it replaced with the correct one, but the reply was that the item had been Spec. changed.
The picture of the product at the time of my purchase had nothing written in the center, but the product I received had SHARK something written in the middle in the English version. 。 The product description page stated that the manufacturer was ASY, but nowhere on the product itself or on the package was ASY mentioned, and I could understand if ASY had changed the product spec. I thought that a different Manufacturer would not be called a change in the product spec.
It must have been over a week since that exchange, but the photo on the product Page has not been replaced.
I don't think it's up to the consumer to make sure the right product is being sent. 。 It is an inexpensive product, and I can understand why they handle so many items. 。 I think you should replace it with the correct product photo immediately, or if you can't do it immediately, you should temporarily suspend the sale. 。 I ended up returning the product and getting the gold back, but don't forget that the customer also put in a lot of unnecessary effort in exchanging emails, packing the product, shipping it from the post office, and so on. 。 I hope you are not thinking of returning Gold.
View detail
![Traction Pad Street Bike Kit [ICON]](https://img.webike-cdn.net/catalogue/images/103505/55-14-0179C_TS.jpg)
Double the ease of knee grip
Doubles the ease of Knee grip!
It is not a type of mussel, but it has a firm and secure Grip feel.
The Large and shape are perfect, and the adhesive is quite strong.
Recommended Parts!
View detail
Parenthesis good!
I like Largeisa and Design very much.
The thickness is about 3mm, so I think the Body can be well protected.
There is no backing paper included for positioning the paste, so you have to measure and paste it yourself. It would be great if a backing paper was included.
View detail
viscosity
When I remove the Cover during the next touring after applying the adhesive, the pad at the bottom is fluttering. Already no adhesion.
It was put on by a Shop Service person. I wouldn't write this kind of comment, but it's a pity that PRO put it on.
I'm wondering if I should buy the same item.
View detail
I have a good knee grip.
[How is it used?
Purchased because the tank was too large and difficult to grip by the knees.
I chose the Pro type because I thought it should look less lumpy.
Was the one you received as per Image?
I think it was as per Image.
I thought it would be like this since it is Rubber or Silicon.
Was the installation difficult?
A cleaning sheet before pasting is also included.
Size was also no problem, as it is dedicated to the car model.
How was your experience with it?
It is not rugged, but it does serve as a firm non-slip surface.
[Included Parts:were they on?
The cleaning sheet and Instruction Manual are included, but the Instruction Manual is only available in English version.
[Was there anything that disappointed you?
I think it is a little expensive, but I will use it for a long time, so it is OK.
View detail
Quality is better with Stomp Grip.
I had installed the Stomp Grip but the seat on the side cowl side was too small and didn't hit my knee area, so I left the Stomp Grip on the tank side as is and replaced it with the EasyGrip on the side cowl side. As other reviewers have said, the EasyGrip is a large size, and I am satisfied with its functionality, but the EasyGrip looks like it is cut out from a large Seat to fit the car model, but the StompGrip has no warts on the edges and is molded one by one, so the texture and appearance are parenthesis. The StompGrip has no warts on the edges and is molded one by one. It's a choice between functionality and appearance. View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Cover the cheapness of OEMs
I put it on for appearance, but since I have a bar lock key and a traffic safety talisman attached to the main key, I thought it would also prevent scratches on the fuel cap when refueling. I think it will also prevent scratches on the fuel cap when refueling.
I think the evaluation of quality and cost performance will depend on durability.
View detail