Reviews
Large satisfaction, I should have changed it earlier.
I have tried various levers from brembo OEM, but this one fits me the best, including one for Clutch SideRCS.
When I inquired about the compatibility with my favorite XR0.11.71, I was told that it was not made by brembo, so I could not get an answer. I checked the description of ASite and found that RMCMASTER is available! I immediately bought it because the delivery date was earlier than this one.
View detail
Easy to use
There were not many options available for the GSX-S1000GT, but I am satisfied with the product. It is easy to adjust.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
It's not bad.
The lever position adjustment is a mechanism where the screw comes out and hits the base, so it is not possible to adjust without a tool. I would like to have a dial type adjustment like the brake lever.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
Fits: SUZUKI GSX-S1000, YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000F, YAMAHA YZF-R1M, SUZUKI GSX-R1000R, KAWASAKI Ninja ZX-25R, KAWASAKI Z650RS, SUZUKI GSX-S1000GT, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4R RR, SUZUKI GSX-R1000, SUZUKI KATANA
appearance
It is almost all about looks. Installation is easy, but be sure to follow the tightening Torque. View detail
Fits: HONDA Dio (2 Cycles), HONDA Livudio SR, HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Superdio, HONDA Superdio, HONDA Livudio SR, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA livudio, HONDA Livdio ZX, HONDA livudio, HONDA DIO [Dio]., HONDA DIO [Dio].
Bearing was subtle.
I have concerns about Bearing.
It is made differently from OEM and the Ball easily comes off RoseRose and falls off.
It is easy to restore a dropped Ball, but I felt it would cause problems after assembly, so Bearing reused the original OEM.
Other than Bearing, I don't think it is much different from OEM.
View detail
LightOnOff switch purchased and installed at Shop
It is also convenient to install a switch with a light ON/OFF function. View detail
ZETA X3 Protector
I installed the AdventureArmor Handguard and purchased the Protector from the same ZETA.
Although I was not sure if I wanted to go with the XC, which is a bit larger, I was happy with the X3 because it was a small motorcycle to which I would install it.
The Size is good for those who are OK as long as they do not get hit on the fingers by flying rocks or hard insects while driving, because it is Small for wind protection.
The Master cylinder guard, removable with Screw, was also a simple but interesting GuiMick.
Four bolts are also included, making it easy to install on vehicles that already have a hand guard installed.
The color White can be Blue-ish or Green-ish. I saw a Review that said
The color of the one I received was what can only be described as White when viewed indoors or in the sun.
Perhaps there is a slight difference depending on the production lot.
View detail
Fits: SUZUKI TL1000R, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI GSX1400, SUZUKI GSX1400Z, SUZUKI GSX1400, SUZUKI GSX1300R Hayabusa, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250F, SUZUKI BANDIT1250
rumor that appears to be quite true (rumour)
Replacement from FoldingLever in U Canaya.
The Kanaya Lever itself is a good one, but I replaced it because it had a fall damage since I bought the body and I did not like the Straight shape very much.
In comparison to Kanaya Lever,
The gentle bend at the base of the lever allows for more freedom in where you place your fingers.
As sung in the advertisement, the lever is gently curved so that it is soft to the touch when you hold it.
Both Levers are about the same thickness.
It was like that.
As the previous reputation suggests, I think the feature of the Largeest is the gentleness of touch when you hold it.
It is truly a lever for city driving and touring.
Those who want a Solid Touch or Sporty feel will not meet with many people, so the Straight shape is better.
View detail
Fits: HONDA VTR1000FVTR1000F FIRESTORM, HONDA VFR800, HONDA VFR800XCROSSRUNNER 125, HONDA VFR800F
Lever of Leaning Type
Unlike the Touring type, it has a hard feel to the touch due to its angularity. View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Color variations are great!
I was attracted to the fact that all three Parts can be specified in different colors, the length of the lever can be changed, and I had recently become fond of Speedra.
I don't know yet how it feels or how comfortable the grip is since I have only been able to ride it once since the replacement.
View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA SHADOW400, HONDA SHADOW1100/1100Classic, HONDA VTR250, HONDA VT750S, HONDA VFR400R NC30, HONDA VT400S, HONDA RVF400 NC35 , HONDA NSR250, HONDA NC750X RC72, HONDA NC750S RC70, HONDA NC700X RC63, HONDA CBX400F
GOOD looking
Installation itself is very easy.
With Adjust so it can be adjusted to your grip.
I think it is a very flourishing Parts with good detailing.
View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
Great upgrade on my monkey baja!
i got this item to upgrade my monkey baja, it fitted really well and looked great. i was super happy wth the fitment and it all plugged into the factory harness with no adjustments View detail
Fits: Others MIKUNI VM26, Others KEIHIN PE28, Others KEIHIN PE24, Others KEIHIN CR mini, Others KEIHIN PD22, Others KEIHIN PC20, Others KEIHIN PC18, Others KEIHIN PB16
Improved the throttle feel!
I used this to change out my factory honda throttle and it worked really wel and gave me a much better throttle feel and i really enjoyed how fast it made the bike feel! View detail
A classic!
I wasn't unhappy with the feel of the OEMLever, but I didn't like the look of the Silver, so I replaced it!
It looks better and feels better, and the grip is more comfortable.
I am glad I replaced it!
View detail
It is inexpensive and Parenthesis is good!
I wanted a closed type hand guard, and at first I was going to buy a ZETA, which is available only for car models, but I was hesitant because of its high price.
After much thought, I remembered this product that I use in my SUPER CUB, and when I checked the price again, I was astonished at how inexpensive it was and purchased it immediately! (Lol)
SUPER CUB is in Black, but CRF is in White.
The hand guard itself was not a simple installation, but rather a simple cut where the brake hose interfered. The holes for the handlebar clamp did not fit.
The material is soft, so processing is not a pain.
It is inexpensive, and if you like the shape, you can buy it on the assumption that it will be processed.
However, if the purpose of attaching a hand guard is to protect against wind and cold, we recommend that you purchase a larger hand guard.
As for me, I like it very much... ♪
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 1199 PANIGALE, DUCATI 1199 PANIGALE R, DUCATI 1199 PANIGALE S, DUCATI 1199 PANIGALE TRICOLORE, DUCATI 1299 PANIGALE, DUCATI 1299 PANIGALE S, DUCATI 749, DUCATI 749EVO, DUCATI 749EVO CORSE SE, DUCATI 749R, DUCATI 749S, DUCATI 848, DUCATI 848EVO, DUCATI 848EVO CORSE SE, DUCATI 848R, DUCATI 848S, DUCATI 899 PANIGALE, DUCATI 959 PANIGALE CORSE
Adjustment range
It is great because the adjustment range is very fine. The other day, when I fell down on Circuit, the force was applied to the front side, and the Crack appeared at the root, not the lever. It is good for standing fall, but it may be weak for Circuit fall. I repurchased it again because of its good cost performance. View detail
Fits: HONDA CRF250L, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
Now in an easy-to-grip position.
The OEM clutch lever was too far away, and I had to grip it with the base of my thumb for support, which caused me pain, so I replaced it.
I wanted a firm four-finger grip, so I bought the 4FingerType.
I have seen other reviews stating that it was not as close as expected, etc., but in my opinion, it has improved a lot and is easier to grip.
I felt that 3FingerType would have been better because it pinches Small finger when I do it with 4FingerType Lever. (Lol)
It looks Parenthesis good and the grip is very comfortable.
Since the price is high, I'll put up with OEM for the Brake Side, which I'm not particularly happy with. (^_^;)
View detail
Impeccable!
I chose a handlebar 100mm longer than the OEM one to replace the handlebar on my SR400. The movement is smooth and I like it! View detail
Fits: HONDA GB250 CLUBMAN, HONDA MVX250F
The texture and shape is so nice that you can hold the Lever all the time!
The adjustment range is quite large, which is convenient, and the large 1-Click angle makes it easy to see the effect. However, the furthest away is too far away to grip, and recently it is too close to full break or full clutch cut.
The color is very nice, I chose Titaniumium color for both Lever and Adjuster, and it matches the traditional atmosphere of GB250 CLUBMAN EXACTLY. I could have chosen a gorgeous color for the Adjuster with Accent, but I think it would have floated around the Handlebar of GB250 CLUBMAN, so I am glad that I chose the same color.
Once, Side Stand didn't go down to the end and I tipped it over, but thanks to Foldable, the lever didn't break! (Lol)
I am satisfied with the WW because the reversible function worked perfectly.
View detail
I think the texture is good.
[How is it used?
I replaced it and ran about 150 km.
The shape of Lever is slightly different from NORMAL, but I soon got used to it.
Was the one you received as per Image?
Almost as Image.
Clutch lever is a little cheap in the Plastic part.
Was the installation difficult?
I am a beginner and it was very easy because there was a video of the exchange on Youtube.
I think anyone with 8mm and 10mm Wrench can do it.
How was your experience with it?
It looks good because we matched the color to the Fork and Wheel!
[Included Parts:were they on?
Grease is not included, so if you don't have it, you should buy it.
[Was there anything that disappointed you?
Plastic part of Clutch is cheap.
View detail