Reviews
Fits: Others Wire clutchCompetition model, SUZUKI RMX450, SUZUKI RM-Z, SUZUKI RM, KAWASAKI KLX450R, KAWASAKI KX-F, KAWASAKI KX, YAMAHA WR-F, YAMAHA YZ-F, YAMAHA YZ, HONDA CRF-X, HONDA CRF, HONDA CR
Definitely lighter.
I had been using OEM Clutch for a long time, but it was too heavy and tiring, so I replaced it with this one.
To install, remove all the originally attached clutch lever and holder, leaving only the wires in place, and then install.
The dust cover is screwed on, so it must be disassembled and assembled before installation.
Also, the Clamp portion is rotated so that it is less likely to break than a regular Lever or OEM.
The Nut that adjusts the distance of the Lever is also hexagonal, a spec. that can be firmly fixed in place.
I prefer to set it quite far away, but it feels quite light when I pull the lever, I don't know if it's because of the Ratio or some other secret, but I think you can feel it the moment you hold it.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Tail Bulb replacement for KSR's Fender Eliminator Kit
I purchased a used KSR80, but the previous owner installed a Fender Eliminator Kit, and the tail lamp is a Lucas type.
There was a Trouble with Tail Bulb immediately after purchase.
I removed the Lens to see the model of the Lamp to replace it, but unlike the usual Double Bulb, the head was a Small Rhinoceros Bulb.
This Type was not sold at Home center or Car Shop 。 Maybe MotorcycleParts specialty stores have them, but I can't find any near me. 。
However, because the length of the Tail Bulb was different, it interfered with the Lens, causing the Lens to chip, melt, and consume more power due to its higher wattage.
I had put it off because it was inexpensive but the shipping and other things made it needlessly expensive, but I had some shopping to do at WeBig, so I bought it as a package deal.
After installation, there was no interference (obviously), and since the Watt number was lowered, the power consumption was also lowered, eliminating the concern factor.
I am planning to eventually switch to LEDs, but there is a barrier of full-wave rectification, so I may end up putting it off.
View detail
It doesn't work well.
Since I changed to this pad, the Rear does not work well and I can't get to the point where I can activate the abs.
On long descents, it sometimes didn't work at all.
View detail
Great grip comfort
The OEM Lever for the SV650 is a good or bad bike Level, but this Lever not only looks cool, but I was surprised at the high quality when I held it for the first time after installation!
Installation is easy and takes less than 30 minutes if you have experience with grease up and lubrication of Lever!
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA400R (-2013), KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI NINJA650R, KAWASAKI VERSYS 650
For NINJA400R
Installed on NINJA400R.
Since it is an important safety part, we asked Motorcycle shop to install it.
The feel of operation, texture, etc. was perfect without any complaints.
If you are not confident about installing it yourself, ask a professional contractor to do so.
View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Firmly.
I could not tell how light the Clutch was, but the build quality was solid, as if it were an OEM product.
Durability, that is the most decisive factor.
View detail
No different than OEMs
Purchased due to leaking oil line. I am glad that the quality is the same as OEM and the price is lower. I will buy again when it breaks. View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
Very common EXGaskett
CROSSCUB110 (JA45) Used to replace the Exhaust System of
I think Gasket is the same for all Manufacturers.
No exhaust leak etc.
It was cheaper than OEM Parts.
View detail
Fits: HONDA CBR250RR, HONDA MONKEY125, HONDA CL500, HONDA CL250, HONDA GB350S, HONDA GB350, HONDA Super Cub C125, HONDA GROM, HONDA CB250R, HONDA MONKEY125, HONDA CB125R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR250R, HONDA CB250F, HONDA CBR400R, HONDA CB250F, HONDA CB400F, HONDA CBR400R, HONDA 400X
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R750, HONDA CB1000 SF, HONDA CB400SF, HONDA X4, HONDA CBR1100XX SUPERBLACKBIRD [Super Blackbird]., HONDA CBR900RR FIRE BLADE [Fireblade]., YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, YAMAHA FJ1200, YAMAHA FJ1100, YAMAHA XS1100, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, SUZUKI GS1000, SUZUKI GS750, SUZUKI GSX1100, SUZUKI GSX750
Just cover it!
Funnel is bad for the engine and does not pass vehicle inspections. The RAMAIRSystem is a simple system that can be installed on the engine, and it is easier to remove than the Power Filter, so if you want to change to a funnel, you can easily remove it. View detail
Fits: HONDA HORNET (600) (HORNET), HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET, HONDA HORNET-S (600) (HORNET)
NTB Air Filter Review
I purchased this Air Filter for my Hornet 250. Its been great, product is just like the genuine Honda Air filter. Product size, design and all specifications are same to the genuine Honda Air Filter. Must say, the package was in good condition the packing was done perfect. Thank you Team webike for giving us the maximum value for our paid price. I recommend this product to anyone, personally the best for the price. Thank you Team webike! View detail
Fits: SUZUKI GLADIUS 400 ABS (GLADIUS650), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (Glass TRACKER), SUZUKI Grass Tracker (GRASS TRACKER), SUZUKI Grass Tracker BIGBOY (Glass TRACKER Big Boy), SUZUKI Grass Tracker BIGBOY (GRASS TRACKER Big Boy/GRASS TRACKER Big Boy 10th Anniversary MODEL), SUZUKI GSX1300R (GSX1300R HAYABUSA), SUZUKI HAYABUSA (GSX1300R HAYABUSA), SUZUKI KATANA (KATANA), SUZUKI KATANA (KATANA), SUZUKI RGV250 ' (Gamma), SUZUKI RGV250 ' (Gamma), SUZUKI SKY WAVE 650, SUZUKI SKY WAVE 650, SUZUKI SKY WAVE 650, SUZUKI SKY WAVE 650LX (SKYWAVE), SUZUKI SKY WAVE 650LX (SKYWAVE), SUZUKI ST250, SUZUKI ST250, SUZUKI SV400
Satisfied
I purchased this product to replace my Exhaust System. After installation, there were no exhaust leaks, etc. I am very happy with the product. View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI NINJA ZX-10R, SUZUKI GSX-R750, KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-10R, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R, SUZUKI M 1800 R2 INTRUDER, SUZUKI GSX1300R HAYABUSA, SUZUKI V-STROM1000XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R750, KAWASAKI NINJA1000
Be careful when making a hit.
I have not purchased this product in a long time.
It is a good quality pad that can be used on public roads and circuits in all weather conditions.
The Control at the beginning of the grip is similar to the Rear, which is useful when the foot is unstable.
Braking power doesn't matter in the rain, and it doesn't become blatantly ineffective like a cheap Pad.
It's a little further back that you'll get decent braking power compared to the Pad, which has a quicker startup.
The braking force is satisfactory for use on public roads.
With Circuit, you have to grip it hard to get enough braking power.
I guess that's what I'm talking about in exchange for Control.
I have no complaints about the release condition of the Pad at my Level.
Compared to the 6POT Pad, if overused, Lever will be in the back.
But that is only at the beginning. If you adjust Lever to a wider range beforehand and start driving, there is no problem.
I think it is a good Pad to use with BPF, in my opinion.
This level is just right for that characteristic of gripping a little and entering with a "scauper" sound, and then returning with a jerk after releasing.
I don't think the price is too high, so I will still be Repeat.
What you have to be careful about is when you make a hit.
It does not work as well as you might think, so be sure to check the effectiveness of the system or there is a high risk of a rear-end collision.
Be careful if you use Brake strongly from the beginning and stop after a short distance.
View detail
Fits: DUCATI Multistrada Enduro, DUCATI Multistrada Enduro Pro, BMW R1200GSW, BMW R1200R, DUCATI Hyper Motard SP 800, DUCATI 959Panigale Corse, BMW R1200GS Adventure, BMW R1200 R nine T, DUCATI Scrambler CR Cafe Race, DUCATI Scrambler CR, DUCATI Hyperstrada, DUCATI Monster Dark, DUCATI Scrambler Flat Track Pro, DUCATI Scrambler Classic 800, DUCATI Scrambler Enduro 800, APRILIA RSV1100, APRILIA RSV1100, DUCATI monster, BMW S1000XR, DUCATI Hypermotard
Good Control property
I have used it with other Large type NKs and was satisfied with the Control property braking power durability.
The brake of the Street Triple 765R, which was added to the fleet, was strong but difficult to control, so we decided to try this one first while we were considering replacing it with a radial master.
It is expected that the back plate is thicker than the standard bremboPad, or that the corners are beveled to a Large width.
Control could be improved without feeling a loss of braking power.
It is good enough to put Radial master on hold.
View detail
Fits: SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSR750
The texture is very good.
As expected from Made in Japan, the texture and finish are very beautiful.
Easy to operate as both lever and position can be changed.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Lever is rounded for easy grip
Texture and finish are both very beautiful
Unlike other types, Touring type has a rounded lever for easy gripping.
Easy to adjust lever position
View detail
Useful for Wiring protection and concealment
Useful for concealing and summarizing Wiring
Bend it about 45 degrees toward the uncracked side to open it up and put it in.
It is recommended to install it near moving parts or near the heat source.
This time, I protected the Cable on the front of Camera in DriveRecorder!
View detail
Useful for Wiring protection and concealment
For fine lines, φ3mm is sufficient
Only one Plus wire (ACC power etc.) so it is ideal for protection!
View detail