Reviews
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Required for Flywheel removal
Used to loosen the center bolt when removing the flywheel.
Functionality is fine.
The restrains on the Adjustment Bolt were reluctant to move and could not be fixed properly without support.
View detail
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix. View detail
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
I feel like I've been cheated.
To be more precise, this tool can only be used to remove the Pulley side and to install the Clutch Side.
We don't use Rose's because it is Air, but we wanted to use it for Torque management when embedding...
I managed to fool them into thinking it was better than nothing.
View detail
Fits: HONDA ZOOMER(Ruckus)
KN Planning Exclusive Tool for Disassembling of Drive System
I bought it because I thought it would be universal to some extent, although it was designed to be used with ZOOMER.
Exclusive Tool for Disassembling of Drive System". This is a straightforward Naming product, but it is a proper product name.
The common trade name is Universal holder.
As the name suggests, it is used to prevent parts from turning when removing the clutch or pulley face of the scooter.
I used it to service my ADDRESS V100, but I feel like I need to think carefully about where the force is applied to use it on the Pulley face side.
I use it with electric Impact wrench as a supplement.
View detail
Good tool if used as intended.
This tool does what you're asked if you use it for its intended purpose. Bought it to hold the flywheel on my Honda crf250r while tightening the nut. Some mentioned that it failed and didn't do its job. Don't use it to change the oil filters in your car or put on your ex-girlfriend's tire and it should work just fine. I've used it on a few bikes, KTM and Honda it still looks and works as it should. I would buy it again as it's the right price for a tool you can use about 6 times in your life.shipping is very fast,well packaged, thanks webike. View detail
Thoughts on using it
[How is it used?
Used to remove Clutch and Pulley from Scooter
Was the one you received as per Image?
No problem as per Image.
How was your experience with it?
I have not had any inconvenience at all.
[Points to note]
The holes are positioned in the most comfortable manner (opening angle), and then tightened and secured in place.
How did it compare to other products?
The product is not different in usability compared to the well-known manufacturer's product used in the past, and this product can be recommended because it is less expensive.
View detail
Fits: HONDA ZOOMER(Ruckus)
Required for drivetrain maintenance.
This tool is indispensable for removing and installing pulleys and clutches. There are a variety of such tools sold by various companies, and we were not sure which one to purchase, but we chose KN Kikaku's tool this time because of its price and the fact that the company is a manufacturer that handles many ZOOMER parts. There are two types of ZOOMER parts:one is a hook type, like this one, and the other is a type that wraps around the circumference of the product, so you can choose the one you like best. I used the one shown in the photo by fixing it to the ground and had no problem using it. I think this is the most common way to use the Case when working alone. The torque for installation is large, so it is difficult to hold it down with the left hand and tighten it with the right hand. If you do not want to scratch the car body side, I think it will be a good idea to protect it with cloth to prevent wounds. View detail
Pin is short and unusable.
The pin is short and the holder is at an angle, making it difficult to apply force and work.
When incorporating Mr. Takekawa's parts, the Manufacturer listed them as tools, but…
View detail
If the payment is by Silver bank transfer, you will be contacted separately, I don't know how to contact you.
I don't know how to do Cancellation, give me your contact info. View detail
I would like to cancel this product.
How do I make a cancellation? View detail
I want to do Cancellation!
I'd like to cancel my reservationHow do I cancel my reservation? View detail
Cancellation
I'm pissed off, I can't cancel anyway, I want my Gold back. View detail
Cancellation.
This product can only be used for Honda motorcycles. View detail
good on cost
[How is it used?
TZr250R (3XV) I used it to remove the Flywheel of the generator of the "Mere Old Man" because it was rusty and I wanted to maintain it.
The Universal holder is available from various manufacturers, but I don't know the difference, so I chose this product which was cheap.
Was the one you received as per Image?
It is bigger than I expected. I was able to use it as soon as it arrived without any rust.
How was your experience with it?
I inserted it into the hole in the Flywheel and removed the Nut from the Center, but the retention was a little unstable and I wanted another hand.
Well, I was able to remove the Nut safely, so it did its job well enough.
TZr250R (3XV) To remove the Flywheel, you can also use the Puller (https://www.webike.net/sd/152021/) is required (I don't think it has to be YamahaOEM Product)
[Points to note]
Because it is a Universal Product, it is not a translation that hangs firmly, and it is necessary to hold it well so that the Holder may not come off.
I did some good work with my feet and stuff.
How did it compare to other products?
To be honest, unless it's from a Chinese manufacturer that you don't understand, I think it's the same no matter which Large body you choose.
It seems that the shape of the tool is slightly different from that of the tool manufacturer such as Straight, so it may be more stable... though it is expensive.
I thought this product, which was in stock and inexpensive, would be the best cosmetic option.
【Review】
These Items are required to Rose the Engine.
I thought it would be good to consider the one of the tool manufacturer etc. according to the budget because it comes out from various manufacturers.
This product was enough for me because I don't have so many appearances.
View detail
It's just one of those things.
It's not impossible to use, but it was easy to come off because the hook was too weak.
I think it would have been easier to use if there were no bumps in the patches.
View detail
I'm not on much.
I use it to remove the Flywheel on my LEAD 100.
There is a similar product, Band, Belt, or Type, but I would like to use the Pin type which is highly universal.
I chose the
The pin diameter of this product is 5mm and 9mm, and 5mm is just right for fixing the Flywheel of LEAD.
Also, the 9mm one is used to fix the drive train.
I really appreciate the universality of it.
I don't have a lot of time to use it in my daily maintenance, but the Gold price is reasonable, too.
It is very useful to have.
I mean, I can't do LEAD maintenance without it ….
View detail
Necessity of maintenance
Scooter drivetrain maintenance essentials
We can't start without it.
But it's hard to use it for anything else, the fate of specialized tools …
I think I'll use this on Sunday to trade the Weight Roller for the Belt …
View detail
Maintenance essentials!
Scooter drivetrain maintenance essentials
We can't start without it.
KN Planning:KN Kikak
Universal Holder SUZUKI Series
https://www.webike.net/sd/22644793/
I bought it to use at the same time
Easy to use and durable!
View detail