【MINIMOTO】Universal Holder Review
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix.
Responses
Other reviews
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Thoughts on using it
[How is it used?
Used to remove Clutch and Pulley from Scooter
Was the one you received as per Image?
No problem as per Image.
How was your experience with it?
I have not had any inconvenience at all.
[Points to note]
The holes are positioned in the most comfortable manner (opening angle), and then tightened and secured in place.
How did it compare to other products?
The product is not different in usability compared to the well-known manufacturer's product used in the past, and this product can be recommended because it is less expensive.
View detail
good on cost
[How is it used?
TZr250R (3XV) I used it to remove the Flywheel of the generator of the "Mere Old Man" because it was rusty and I wanted to maintain it.
The Universal holder is available from various manufacturers, but I don't know the difference, so I chose this product which was cheap.
Was the one you received as per Image?
It is bigger than I expected. I was able to use it as soon as it arrived without any rust.
How was your experience with it?
I inserted it into the hole in the Flywheel and removed the Nut from the Center, but the retention was a little unstable and I wanted another hand.
Well, I was able to remove the Nut safely, so it did its job well enough.
TZr250R (3XV) To remove the Flywheel, you can also use the Puller (https://www.webike.net/sd/152021/) is required (I don't think it has to be YamahaOEM Product)
[Points to note]
Because it is a Universal Product, it is not a translation that hangs firmly, and it is necessary to hold it well so that the Holder may not come off.
I did some good work with my feet and stuff.
How did it compare to other products?
To be honest, unless it's from a Chinese manufacturer that you don't understand, I think it's the same no matter which Large body you choose.
It seems that the shape of the tool is slightly different from that of the tool manufacturer such as Straight, so it may be more stable... though it is expensive.
I thought this product, which was in stock and inexpensive, would be the best cosmetic option.
【Review】
These Items are required to Rose the Engine.
I thought it would be good to consider the one of the tool manufacturer etc. according to the budget because it comes out from various manufacturers.
This product was enough for me because I don't have so many appearances.
View detail
It's an outside item
I used it to hold up a Pulley on a moped
Please note that this product is an external product
It cannot be pinched like a Stag beetle
No rattling etc. and high quality
View detail
It didn't work, but it's a good cosmetic
I bought it as a Pulley off of co-MAJESTY, but as I feared, the Pulley It couldn't be used because it interfered with the back face fin But it's just an universal product, so it's not the same as the Clutch area It is a good tool to have because it can be used for motorcycle View detail