Reviews
POWERAGE indeed!
I also have a PoronPRORecta for the upper body, but this time I installed it for simplified use.
I wore it over CompressionWear and it was not too tight, yet it did not slip off.
Another advantage is that the protector portion can be bent, making it less bulky when stored.
View detail
To Guard
I bought this for my Motorcycle but also for my Guard when I do SnowSCOOT. I think I have thick arms, but the size was just right for me. However, it may be too large for women. The bad thing is that the mesh bag with the storage function and the tag are sewn together, not stapled together. I had a sewing store sew it up for me. View detail
I'm a soft shell guy.
I have previously purchased a Jacket with Hood with a hard pad in RSThailand.
However, I personally do not like the firmness of the pad and was thinking of replacing it with something softer like a soft shell. The reason I don't like it is that it makes me tense up when I am not riding my motorcycle.
This product is a product of RoughAndRoad, but the Pad shape is similar, so they were compatible.
Of course, the safety will be less than the original performance, so I believe that it is the responsibility of the individual to replace them.
View detail
Size feeling
I selected the size after looking at the data, but I think it is a little too large for US size. I think the best size for me would have been M Size, even though I have a stocky build. The function itself is fine. View detail
Cover widely from elbow to forearm
It will consist of a gray Pinpoint HardShell + 3DF Shock Absorbing Pad underneath.
?? about the fit
The type of attachment is a type that wraps around the Cover portion, not the Band with Magic tape, so there is no need to worry about deterioration of Magic tape, mud, wear and tear due to fiber entrapment, or loosening of the Band, which I think is very good.
On the other hand, if it grows out, it will be difficult to recaBarry, but it would be better to replace it when it grows out, considering that it is something that protects you in the first place.
I wore it over a long-sleeved, quick-drying inner layer, fearing a fiber rash due to my constitution, and felt a gapping sensation due to vibration.
The stretchable material is also breathable and flexibly follows the bending motion of the elbow, including the Protector, making it suitable for long-time use.
?? about the key defenses
We chose this product from the company's lineup for use in Enduro competitions, where contact and collisions are relatively frequent, and we think it is the right choice for our application.
The plastic shell reduces the impact of sharp blows when falling on a rough terrain or coming in contact with trees or other obstacles on the course, and the 3DFPad absorbs the impact, making it more durable under usage conditions than the company's 5.0, which does not have a plastic shell.
Unlike HardShell products, which are made entirely of plastic, many of the 3DF parts are wrapped in cloth, so they are likely to deteriorate quickly when they are damaged by rubbing or scratching.
View detail
Purchase for tandem
I was looking for an upgrade to my existing elbow protector and purchased a small M size to use as a tandem chair. It's a shame that it moves a little every time you insert it into the elbow pocket of the jacket, but I'm satisfied with it because it seems stronger than the existing protector. -------------------------------------------------- -------- I wanted to upgrade the elbow protector, so I bought it in a small M size to use it for Tendemja. It is a pity that it will move little by time when you move into the elbow pocket of the jacket, but it is satisfactory because it looks stronger than the existing protector. Powered by Google Translator View detail
Large Scale
I bought it so that I can run in normal clothes, but it is too large to be used under a Jacket.
I'm all about sleeves.
I thought it was for use at the top of Jersey or Outer.
I thought it would be cheaper and better, so I went with Hard Type, but I guess I made a mistake.
Installation is simply by threading the arm through the Rubber, but the tightening adjustment of the Rubber is for Type, which adjusts the tightness of the Rubber using only the moving ring,
I wish it had a Velcro stop.
Also, the ends of the rubber are sewn on, so it would be a hassle to replace them when the rubber is ruined.
The Protector itself is quite tight, and if the Protector is tightened to the point that it does not Gap, the elbow will be fixed in place.
I got CE, but Level 1 would have been thinner.
View detail
Solid
SimpsonNSW-2103 (Winter Jacket) I purchased this product to be installed in a
I was looking for a Shoulder and Elbow protector, which can be installed but are not included.
Both Size:There is a little bit of play on the jacket side, but it is a firm protector, so it will adjust to your body shape when you put it on and will be fixed in place effectively. It does not deform even if you hold it from above.
Winter jackets are thicker than the original jackets, and look stiffer when Protector is added. It is the opposite of the recently popular motorcycle wear that looks like regular clothes. But I personally like it.
SimpsonNSM-2203 (Jacket for summer) I also put it on the
It is thicker and more secure than the mesh protector that came with the Jacket. When I actually use the protector, I find that there is no airflow in the protector part. It feels very hot because the air can't escape properly. It is not good in summer. The mesh protector that comes with the mesh jacket is better.
The product description clearly states that it is for both Simpson and elf use. I was able to purchase it without hesitation.
View detail
This is good enough, no worries about gapping!
It is fixed in three places:the upper arm and two places in front of the elbow.
In addition to the Velcro, the elbow front portion has an inner-like portion, which holds the elbow relatively firmly in place.
On the other hand, it may not be to everyone's liking, as it is sweat-soaked and the feeling of pressure can be bothersome.
There is also a possibility of interference when used with Protector with Shoulder Pad.
No problem at all to attach to OffJersey's Inner.
View detail
It was not bad to use, but CUB leaked due to sweat!
I wore it for a day on a hot, sweaty day and the part where the Protector was adhering to it was CUB-red and CUB-red….
The mesh fabric part is fine, but the ProtectorPocket part is made of stretch fabric that adheres closely to the Protector, and the Protector itself has no ventilation holes, so it gets stuffy.
This would not work in the summer or in sweaty situations.
I'd rather wear a mesh jacket that doesn't stick to my Protector.
View detail
It is for MTB.
It is originally Protector for MTB, but I bought it believing in Material called D3O.
Elbow protectors for off-road motorcycles are usually equipped with plastic cups, which are safe, but I was concerned that they were stuffy and difficult to move around in, but this protector is D3O, so it is soft and fits well.
I fell down several times in Enduro the other day, but thanks to you, I did not have any injuries, especially to my arms.
I washed my sweaty Protector as it was, because it was D3O, and I was glad that I could do that without Cup.
I am 170cm tall with a normal build and the M size was EXACTLY what I was looking for.
View detail
^o^Good Fit feeling.
Easy to put on and good cosmetics! View detail
just to be sure
The same is true for all parts, but the shape tends to float, so it may not be suitable for those who chose the Power age because it does not look like a MotorcycleJacket.
PJ-20301 I used it on WaterBlockAll seasonsParka and I am glad I bought it because this one doesn't float much.
View detail
A gem I finally found.
This is the fourth similar item I have bought and finally came across this gem.
Excellent fit.
View detail
Defense Up
The standard protectors on Power age jackets are a bit insecure, so for safety reasons, we upgraded all the areas of the jackets. It is a good product with high shock absorbing power in a soft material that doesn't make you feel stiff. The only drawback is that it is expensive…. View detail
Fit feeling Good!
The fit is better than that of a well-known manufacturer I used to use.
It looks like mesh but has almost no breathability.
View detail
DEGNER Protector Knee
I purchased this for Knee.
Compared to the Protector made by HYOD, which is used separately, it is almost the same size and moderately soft, so I think it is easy to attach to the Jacket.
View detail
breathable elbow pads
It is inconvenient for me to wear cycling clothes during my daily commute to work, so I bought alpinestars elbow pads on webike, which are used directly on the outside of the clothes. The design has a curved structure to facilitate joint bending, and the elastic straps are convenient. It's quick and easy to adjust, put on and take off, and the ventilated design won't feel stuffy.
-------------------------------------------------- -------- It is not convenient to wear cycling clothes when I work in daily commuting, so I bought Alpinestars's elbows on Webike. It was used directly on the outside of the clothes. It is fast and convenient to adjust and take off, and the ventilation design will not feel sultry. Powered by Google Translator
View detail
Maybe this is the one for Soft-based Protector?
[How is it used?
I bought several pairs of Riding Pants for summer and winter from Werxman at a reasonable price, but they only have a thin urethane sheet in the part where the Protector is inserted in the knee, so I thought I would try to attach several types of Protectors sold by various motorcycle accessory manufacturers to each of them. So, I decided to try several different types of Protector sold by different motorcycle accessory manufacturers. DAYTONA SAS-TEC Protector Single Item PairL Size (Shoulder, Elbow, for Knee) I purchased a
Was the one you received as per Image?
Material is Viscoelastic Screw Koella Stick It is said to have a soft feel in normal use, but when an emergency occurs, it absorbs weak shocks softly and strong shocks rigidly.
It is said to have much higher impact resistance than silicon or urethane materials, and its performance does not deteriorate after impact, and it is said to last about 10 years under normal use.
It seems to be a product that is more than an Image.
How was your experience with it?
It was like a slightly hard Tempur-type low rebound Material, until I bought it. Is it as heavy as Rubber-type Material?" However, it is surprisingly lightweight and the material itself is soft, so the fit to the body surface is good and there is little discomfort when wearing it.
As expected, it is just a little more expensive than the other products we purchased this time.
[Points to note]
The heat resistance temperature is also 100°C, so I wondered if it could be managed in Loose. I was wondering if I could manage it Loose. Do not machine wash." It is stated that the Riding Pants can be washed by hand, so it may be better to remove the Riding Pants once before choosing to wash them, even if it is troublesome (it is stated that they can be washed by hand).
How did it compare to other products?
It is lighter and more flexible than rubber and silicon products, and is said to have higher anti-shock properties, so this type of product may be good for those who do not like hard protectors.
Several similar products are available from other Manufacturers, so please choose one considering price and preferred Manufacturer.
Other items that would be helpful
Point and hang of installation
Quantity" as with other products:Pair (for Left and Right) Since they are "same shape" products, make sure to put them in place on the Riding Pants side without making any mistakes only in the top and bottom.
[ITEMS TO BUY TOGETHER
Buy Riding Pants that can contain Protector, which are available from each Manufacturer.
Expensive Riding Pants may be equipped with a Protector as standard, but you may find it easier to replace it with a Protector sold separately, like this product, to increase the fit and ease of use.
[Opinions and requests to Manufacturer
It is a little more expensive than the Urethane, Rubber, and Silicon type Protector, but there is nothing to say about it because it seems to be more functional.
View detail
Lightweight and good Fit feeling.
[How is it used?
certain The Working Man. I purchased several pairs of cheap Riding Pants from the following manufacturers, so I decided to try to fit each Manufacturer's Protector to each of the Riding Pants.
Was the one you received as per Image?
The yellow colored part is on the body side, so it is soft and the black part is on the outside, so it is made of hard plastic that will not be affected by external shocks. It gives a sense of security.
How was your experience with it?
To be honest, I thought the yellow-colored part was a low-resilience material, but it was a normal UrethaneMaterial.
Yellow-colored urethane inside gives a sense of fit. to the "Guard" on the outer Black rigid plastic part. The light weight of both materials may also be a factor in reducing discomfort.
[Points to note]
The urethane part is not resistant to heat, so it may not be suitable for use in a dryer.
How did it compare to other products?
It is slightly lighter than the Rubber and Tempur systems. I'll take it." Or "absorption" There is a difference between doing it and not doing it, but I am not sure which is better at the moment.
I'm also purchasing Protector, a shock-absorbing system. You have to experience it for yourself." I'd like to check it out (I don't like to fall down...)
Other items that would be helpful
Point and hang of installation
Quantity:Pair (for Left and Right) There is no difference between the top and bottom of the Riding Pants and the top and bottom of the Riding Pants, so be sure to put the top and bottom in the correct position on the Riding Pants side.
[ITEMS TO BUY TOGETHER
Buy Riding Pants that can contain Protector, which are available from each Manufacturer.
Expensive Riding Pants may be equipped with a Protector as standard, but you may find it easier to replace it with a Protector sold separately, like this product, to increase the fit and ease of use.
[Opinions and requests to Manufacturer
The price is Reasonable and the functionality seems reasonable, so there is nothing to say about it.
View detail