Reviews
Fits: Others Compatible with CPB-1VShield, Others Glamster
face board
I decided to go with Red because it was in stock and I am glad I did.
I'm not sure how useful it is since I avoid running at night as much as possible, but I think it would be effective against the western sun in the evening.
I would like to try other colors.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Pin lock, excellent anti-fogging effect
I chose the dimming Type.
When exposed to ultraviolet rays, it becomes dark during the daytime when the sun is strong because it is firmly Black, and when the sun goes down and it gets dark. [Color] It is a convenient Pin Lock Shield that will become Clear.
It is more expensive than other colored ones, but I feel that it was not an expensive purchase as it changes with the weather and reduces Stress when driving.
I am currently using it on my touring helmet and am considering installing it on my commuting helmet as well.
View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
U-LOOK Blaze MirrorAnti-FogSeat
[Color] As a Smoke Mirror shield user, the ability to convert the OEM Clear shield to Mirror will help prevent the Mirror from peeling off due to cost savings or pebbles, etc.!
No distortion and the view is easy to see in Mirror.
View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
The costumers are great and the quality is great!
I bought the Silver mirror. I was a little concerned because the visible transmittance of the Silver was 12%, but I don't ride at night, so I thought Large would be durable. The quality is very good and the price is lower than buying Shield. The cost is great! Highly recommended! View detail
Fits: Others Compatible with VAS-V MVShield, Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Not too dark and easy to see in Mirror
Used for Clear shield.
I think you can hardly see their faces from the outside.
From the inside, it is not too dark for Mirror, but the view is quite blue.
Darker than La Semi-smoke's Shield in the comparison I used, [Color] It seemed brighter than Smoke.
Individuals differ and have their own preferences, but I find it works fine at night.
I also like the fact that Mirror will be on the inside of the Shield, so I don't have to worry about it peeling off by touching or wiping.
I loved it so much.
View detail
FOGWIN
My impression of wearing it on SIMPSON's RX-10 is that it gets stuck when opening and closing the Shield. I think this takes some getting used to, but I didn't mind it too much. I think this is something you have to get used to, but I didn't mind it too much. View detail
Fits: Others Compatible with CWR-F2Shield, Others Compatible with CWR-F2RShield, Others X-Fifteen, Others Z-8
Cost-effective!
OEM Mirror shields are expensive, but this product provides the same level of replacement as Mirror shields and is very cost effective.
However, it was necessary to adjust the Pin lock with the adjusting Screw to make it adhere.
View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
I highly recommend it because it is not too dark!
"Green Light" I purchased Mirror!
There are other options for color variations, so you can choose the one you like best. The installation was easy:just remove the Shield from the Helmet and fix it to the Pin lock, so anyone can do it, and there is no need to buy an additional Shield. Moreover, the price is low compared to the cost of buying an additional ShieldBody.
I was surprised at the anti-fogging effect when I actually used it.The color of the Green mirror is SMART, you can just barely see your face inside the Helmet, but from the inside it has a Gray tint. It is like wearing thin Sunglasses.
It allows you to concentrate on driving during the day and also blocks reflected light. However, it sometimes felt a little dark when driving in Tunnel or at night, but it was not a hindrance.
View detail
Fits: Others Compatible with CF-1WShield, Others KAMUI III, Others SHUMA
It's insanely good.
It's great, I think changing the Shield makes it too dark, but this makes it so much easier to see both day and night. I think I made a good purchase. View detail
Fits: Others Compatible with VAS-V MVShield, Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Recommendation
The NORMALClear shield can be made Mirror, so it is the best cosmetic solution, and it is about half the price of a Pin Lock Seat on a Mirror shield. Also, VAS-V shields are especially good because you can make the entire shield Mirror when the shield is closed. View detail
Fits: Others VECTOR-X, Others XD, Others RAPIDE-NEO, Others ASTRO-GX, Others ASTRAL-X, Others RX-7X
Not good as a high functionality added product using Pin lockSystem.
Maybe not.
I bought Pink to see if it would help with my tired eyes and blurred vision.
To put it roughly, it is ARAI's Semi-smoke with Color.
As you may know if you use ARAI, the ARAIHelmet works well with the Blow Bench and the Shield fogging is not so bad. (Personal) 、
To be frank, it is more cost effective to buy a regular semiSmoke Shield. It can be used as a spare.
As for my impression of the touch before Installation, the glare certainly seemed to be suppressed when I looked at SilverMatte's illumination through the Shield.
Ordinary Pin Lock Seats are made of a soft material, which can cause a wound if you scratch your nails on it, but this one is made of PET material.:Plastic-like, hard. Anti-Scratch Seat-like for the phone.
I thought it would be nice to be able to handle it rougher than the anti-fogging Main Pin lock.
And then the actual running. I ran about 200 kilometers on a sunny day.
The Green color component is emphasized.
Semi-smoke cuts the sunlight and also makes the shaded areas more clearly visible. [Color] Better visibility than Smoke. In general, it is easy to see.
I think the performance is as good as the manufacturer claims.
[Color] I feel like it's taking longer to dark-adapt than Clear, but I think it's just a Vitamin C deficiency.
The darker the room, the better the impression.
There is also a polarized type in the same series, but I don't want it to be too dark&I guess it's a spec for people who prefer natural vision as much as possible.
There is a discomfort in the coloring when Shield is opened and closed.
When closed, it is easy to get used to it, but when the Shield is opened, the scenery looks greenish due to the complementary color afterimage effect. It seems to be intoxicating for some people.
Pin Lock Seat is annoying in dark places such as Tunnel because of the double reflection of the light source, but this one seems to be suppressed. However, it may be different at night.
As a general comment, I bought the Pink color for daytime use, but I thought I could also buy the Yellow color for nighttime use.
Now, the important thing is the installation, but as others have said, it floats. However, it is possible to make it adhere.
The hard seat also makes it difficult to fit the seat, and because the hard seat suppresses the warp of the shield, the seat does not stick together and floats when it should with a normal Pin Lock Seat.
In addition, the adhesion of the liner that adheres the Shield to the Seat is so good that once it is seated in the SeatPost, it can no longer be positioned without gapping.
I mean, this is a very bad match with ARAI's SeatPost.
It is still hang to be adhered to closely,
After installing the Seat, turn the SeatPost to lock it lightly. At this point, the Center section should still be floating.
With one hand, hold the center of the Shield with the Seat by holding it with the fingers, and with the other hand, hold the edge of the Shield and spread it out and back again.
Then Seat will move Gap a little bit. If SeatPost is moving, you can tell because SeatPost will become slack.
After lightly tightening the slack SeatPost again, adjust the position by spreading it back while holding the floating part with your finger, and then tighten the slack Post......this is called "Quantity:Pair (for Left and Right) Repeat until it adheres nice and evenly etc.
If you try to force the SeatPost to adhere to the Seat by using only the adjustment function of the SeatPost, the Screw will quickly become licked.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I am satisfied with the low price.
Used for Z-7.
The dimming is unpopular with other reviewers, but we purchased the [Color] The product is Clear, so there were no problems whatsoever, and the feel was comparable to the OEM.
The price is also lower than SHOEI's, so this is the recommendation for those who change frequently.
I'm going to Repeat it again.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Transparency is low.
I purchased ARAI's OEM Clear Shield in the hope that it would be a dimming shield, but in a nighttime room with almost zero UV light, the transparency is quite low, and although it is hard to convey in the photo, it seems to be slightly cloudy and cloud-like. I removed the protective seat. I didn't test the dimming in winter outdoors, but I don't think I should expect too much. I will make a comprehensive judgment after actually driving the car. View detail
Effective
Anti-fog effect is perfect.
I used it inside a Clear base Mirror shield and it was perfect for nighttime visibility. It also looks great as a brown.
It takes a hang to install it, so I was forced to install it and the edge chipped off...
Next time. [Color] I would also purchase Smoke and Polarized
View detail
Mitsuba sankowa Anti-fog film for ULOOK VAS-Z
Item received.as in picture,packing was excellent.shipment arrived on time.my 5th purchase so far.no issue.product as advertised.install and vision a bit blur,not sure if it's supposed to be that way or the product is not well store or old stock.can refer to the picture,the bottom is the pinlock install and the upper is the visor. View detail
Not bad, but ….
I put it on SHOEI's GramStar.
I was going to replace it with Mirror shield, but when something that looked white was released, I bought it.
It is a Pin lock modoki, but it is a mysterious product with color.
As you can see in the image, it does indeed add color, and the view you see is a Yellow color.
At first I wasn't sure about this, but once I got used to it, it was easy to see at night.
It was unfortunate that it was more transparent from the outside than I had expected.
Also, the installation was moderately Large strange. I found an official video of the installation, but I could not imitate it because it seemed that they put so much effort on the Level. I could not imitate it.
Large was strange depending on the direction of warping, but I managed it.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
uncomfortable feeling
Anti-fog Film for ULOOK VAS-V Item No. : UL-01T01
Color; Dimmable For ASTRO-GX
OEM Pin Lock Seat (MVPin lock120) is not a problem. I was told that dimming is determined by the amount of UV light, but it is winter so I could not check.
View detail
Fits: Others X-Fifteen, Others Z-8
Dimming Type
Enough dimming to be easy on the eyes
I think it is better than the expensive Shield dimming Type.
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Anti fog screen for Arai Rapide Neo
About quality and texture Smooth plastic well made, flexible but very durable. About the feeling of use During rainy days it will definitely not fog up. It works very well and serves it's purpose. I got the tinned color and it helps to block out the UV ray and the sunshine too. But once riding in the tunnel, there maybe a "double vision" on lighted vehicles. But will get used to it after familiar with it. About Design. Well made easy to install without any trouble. Cost performance and comparison with other products Not sure about other products as this is only my first time using a antifog visor. But I'm very satisfied with the price and the product. About shipping and packaging Small and light product. Well package with very professional packaging. Any concerns, cautions, or advice when purchasing Able to remove and wash it with any problem too. So able to purchase and use the product with ease. View detail
Fits: Others RAPIDE-NEO, Others ASTRO-GX, Others ASTRAL-X, Others RX-7X, Others VECTOR-X, Others XD
Circuit use!!
[How is it used?
I bought this product because my RX-7X I am using for Circuit use is fogging up and I wanted to put a pin lock on it.
Was the one you received as per Image?
I used it at the Fuji Speed wayShortCourse in early December and it did not fog up at all.
How was your experience with it?
I am wondering if I should buy more because the gold amount is reasonable and there is a wide variety of colors, etc.
[Points to note]
How did it compare to other products?
I have only used this one, but it was easy to put on and take off.
View detail