Reviews
Daytona usb 18w.Good
Type C usb.Bult qulity good.water proof.cable lenth inought for from head cowul to handle bar mount.good thing is out put port dust seal is replacibale.Main power supply cable along with mini barral fuse.Out pout usb c port is very tiny and simple mount with cable tie Unfotunatly my unit dosent work some time in idel rpm,I'm suspecting volatge detecting(even viltage above 12,4v )Any way im satisfied. Charging is good can be charge phone battery quickly. View detail
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
Fits: Others
Orthodox USB port
[How is it used?
no problem
Was the one you received as per Image?
Wiring is also discreet and Refreshingly cohesive.
How was your experience with it?
I was able to charge my phone with no problem.
[Points to note]
I doubt that it will be Waterproof on rainy days.
Other items that would be helpful
Installation Point or hang
:Rare/old cars should be installed by a store you can trust.
View detail
Fits: Others
For charging smartphones
I put it in for powering my smartphone and a separate ETC. Maybe it is because my motorcycle is old, but DAYTONA products always give me a hard time. View detail
Fast and furious tokio. Fast and furious tokyo.
"Original product, reasonable price, fast delivery. Thank you. Greetings from Japan.
Original good, good price and fast delivery. Thanks. Regards to japan. -------------------------------------------------- -------- Original product, reasonable price, fast delivery. Thanks. Greetings to Japan. "Powered by Google Translator"
View detail
Fits: Others
Power supply for PanasonicGORILLA
I don't mean to brag, but Motorcycle is Polishing Specialty The length of the Chain cannot be adjusted in
The installation work was done by a Motorcycle shop that we are familiar with.
The installation fee Gold is included in the X-ADV used car delivery and maintenance fee Gold, so the details are unknown.
The USB port is designed to be waterproof, but the plug port is facing down to prevent rain.
I have only used it once, but I have a feeling that Large will be very active in the future.
The cell phone Navigation is inconvenient for some reasons, such as signal loss in mountainous areas. We do not use it because of the high communication charges.
I use a PanasonicGORILLA which I also use with my own car. (VWGolf's Navigation has little information and does not show Costco. (VWGolf's Navigation is not very informative and does not show Costco, and the other information is also very poor.)
View detail
Fits: HONDA DAX125, HONDA MONKEY125
Room for improvement
This set comes with a connector to avoid cutting cables. Unfortunately my 2023 monkey did not have the connector in the pictures nor anything remotely resembling the connector layout. Had to cut cables, sadly. I managed to slightly round one of the handblebar bracket bolts from the set while tightening.. with a small ratchet. The bracket itself and the USB connector are nicely made. Back light is green. The cap seals nicely and gives confidence in water resistence. Manual is japanese. View detail
Fits: Others
For Touring
I don't know how difficult it is because it was installed at the shop when I took delivery of my car.
This is also an OEM Product, but this one is slimmer and looks better, so we installed it.
The appearance of the product looks and feels better than the OEM product.
View detail
It does not require processing. The lid is a bit ….
The USB power supply can be removed very easily if you don't feel the need to remove the front parts, which are the face of the motorcycle. If you don't feel that removing the front parts and drilling holes in the body is too much work, you can take out the USB power supply very easily.
It is not difficult if you have a set of tools used for maintenance. Drilling was done halfway using a plastic cutter, Nipper, and File.
Wiring is completed by simply joining the existing Connector, which is the quintessential OEMAttachment.
It is also helpful to be able to download the illustrated Instruction Manual.
Material for Waterproof:It has a rubber lid, but the fit is squishy and unreliable, and it hits a nearby screw when closed, so it's not great here.
Aside from the amount of work and quality, I wonder if the most appealing feature of the Large is the ability to take out the USB power supply without any wiring process.
For reference, it took about 2~3 hours to do the work by hand.
View detail
Fits: Others
The Connector part is Compact, but the Body box is in the way.
As a result of changing Navigation from 5-inches to 7Inch, when connecting Navigation power to the USBConnector on the BOLT Shoulder Bag
It became difficult to do, so I thought it would be a good opportunity to replace it with this product, which is 2.4A compatible.
As mentioned in the Title, the Connector is compact and unobtrusive, but the Body (transformer from 12V to 5V?) is not. However, the Body (transformer from 12V to 5V?) is
I was worried about the mounting position because it is bulky.
Finally, it is fixed with Double-sided Tape on the Front side of the Top Bridge, which is hidden by the Bullet Cowl.
Red wiring is very noticeable as it is, so the Bullet Terminal is cut out and soldered on.
Spiral Tube and Wiring Cover were used to prevent the Red color from being seen.
The Connectors placed on the Handlebar are Compact and unobtrusive, so they look good when not in use.
View detail
Easy to secure power supply
It is an excellent and easy way to secure power. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Durability may be difficult.
The ease of installation was a plus.
The battery stopped charging less than six months after installation.
According to Manufacturer, it was due to age and not covered by warranty.
I hoped it would be a little sturdier and last longer.
View detail
DAYTONAusb power supply& voltmeter
Since I ride a Motorcycle with Touring as my main vehicle, a voltmeter is very useful for battery management.
The usb power supply is really useful when touring.
DAYTONA products are reliable and satisfactory.
View detail
USB Socket plugged in...
I think the slide style cap is great in terms of both gimmick and operation. However, since the SocketBody and the middle box are of a certain size, I could not pass through the small space around the Handlebar to hide the Wiring, and I had no desire to make it all Rose, so I ended up compromising. In this respect, it might be better to have an intermediate connector like other manufacturers, but it might cause contact failure, so it is a win-win situation.
The included parts are sufficient for most motorcycles, but a plain type terminal would have been a nice addition.
Test after installation is completed (using Anker USB Cable) After repeated unplugging and plugging several times, we were able to confirm that the device was energized. There was a feeling of being stuck until the device was energized, so there may have been something wrong with the molding of the USB Socket.
In any case, we are satisfied that the system is currently fully operational.
View detail
For power supply for the driver's recorder and smartphone.
For power supply for the driver's recorder/smartphone. It is not difficult to do if you have a tool that can reach deep enough. View detail
Necessary for extending power lines!
This wire is needed for the power line for DAYTONA's Radar to be a direct out instead of USB.
The KITACO power supply extraction unit is placed under the Rear Sets and wires are extended from there to the Front.
Wiring is a hassle, but once it's on, it's perfect!
View detail
It's best
Installation is so easy.
Just unplug the headlight and connect it to the blue service wire.
It fits perfectly with the Hunter Curve and has a good sense of unity.
The only downside is that it is not waterproof when it rains.
You need to quickly unplug the USB and close the lid.
It would be even more perfect if it was supplemented to make it waterproof even with USB installed.
thank you -------------------------------------------------- -------- Installation is so easy. Just unplug the headlight and connect it to the blue service wire. It fits perfectly with the Hunter Curve and has a good sense of unity. The only downside is that it is not waterproof when it rains. You need to quickly unplug the USB and close the lid. I think it would be even more perfect if it was supplemented to make it waterproof even when USB is installed. thank you Powered by Google Translator
View detail
Fits: Others
For phone charging +α.
[How is it used?
For securing power supply for smartphones and Cameraetc., which are now necessities.
I purchased the 2-port Type this time because I had previously installed 1 port of the same Type in another car model and found it very convenient.
The Grip heater was installed in the previous car model with a separate system, so we only needed to secure the power supply for the smartphone, but for this car model, we wanted to install a Grip heater of the wrap-around type that can be easily detached with a USB power supply, so we chose the 2-port I chose the 2-port type for the Grip heater and smartphone charging.
Was the one you received as per Image?
It is a Type that attaches to a Handlebar and is a Simple & RefreshingDesign that is compatible with both 22.2mmSize Handlebars and 25.4mmSize Handlebars, and is just like Image.
Was the installation difficult?
It is not too difficult because the Instruction Manual describes how to take out the power supply in several Patterns.
If you are not good with electrical systems, it is better to request a trusted friend or Shop.
How was your experience with it?
It is also able to charge my phone, and it functions properly when I charge the battery of my ActionCamera or use the electric pump (for Tire's Inflator) on the go, so the Large change is very useful.
[Included Parts:were they on?
It includes USB power supplyBodyBody, two RubberSpacer, Extension Harness, Branch Harness, Connector for wiring, and two Tie Bands, so it can be installed with only this product if you have a Large Mortgage Motorcycle. This product alone should be sufficient for installation on most large motorcycles.
[Was there anything that disappointed you?
None so far, how durable is the Rubber cap? I am curious.
0Other items that may be useful include
Point and hang of installation
Since it is a universal product, the waterproof cover (rubber lid) may not be able to be installed in the desired position depending on the treatment of excess wiring or the conditions around the handlebar depending on the type of car.
Let's devise and modify it well and install it in an easy-to-use position.
[Availability and clarity of the Instruction Manual
A simple but thorough Instruction Manual is included in the package. If you cannot understand it, do not hesitate to ask a friend who is good at electrics or a shop.
[Notes]
As mentioned above, do not force yourself to work on something you do not understand, or you may cause an unexpected trouble with the electrical system.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I am concerned about the durability of the rubber cap for waterproof. I think it would be even better if you could devise another way or sell the rubber cap as repair parts.
View detail
OEM-like.
It was easy to attach without any processing required.
It looks and feels like it could be in an OEM.
View detail
I like that you can choose the number of Cigar sockets and USB in the Series.
A long time ago, the power source for additional electrical appliances for cars and motorcycles was mainly a cigar socket,
Recently I have been using more and more USBs, so I bought this product which allows me to do Wiring at once and use both at the same time.
For products that have been used for a long time or for products that require a constant power supply (e.g., a digital camera), we use a cigar socket. Cigar sockets that are left attached are reinforced with Vinyl Tape to prevent them from falling out.
(*When I installed it, I was in a daze and wired the + and − of the battery as per the instruction manual, and made the rudimentary mistake of turning up the battery while the power to the camera was still on. Please be careful.)
Each Wiring Cord is made long, so it is convenient to distribute the installation location. On the other hand, it is necessary to hide the excess cord when it is left over.
In the case of this product, there are a total of three connectors, but of course the total power consumption must be taken into consideration, so care should be taken not to use unnecessarily high power products. For this reason, if possible, it may be a good idea to always have a spare Fuse (MINIGlassTube Fuse 5A) on hand for touring. I wrote this as a reminder to myself.
View detail