Reviews
Convenient.
I was looking for it because I got bent out of shape standing up.
Separate handle category only by car model, and not in the Separate handle supplemental parts category.
If it only appears in the Handlebar category, it won't be found.
in a hurry
According to HURRICANE officials, the effective length of the handlebar differs for each car model.
CBR250R that turned. (MC41) Effective length 205mm for
The one I bought this time is the Universal one from for Repair, 217mm.
The former is a bit helpful because the Handlebar length is quite short and the Switch box was also Limit.
Incidentally, I asked HURRICANE officially if there was anything longer than this, and they said this is the longest.
I would like to see the information properly posted by car model if possible, though.
It's not so friendly, though, because it's often out of stock, and the model number is not listed in the official HURRICANE website, and it's hard to find the official HURRICANE website in the first place,
The angle can be easily adjusted, the holder is strong, and as long as you have the holder, you can use it in any way you want.
View detail
Fits: HONDA APE 100, HONDA GB250 CLUBMAN, HONDA APE 50, HONDA APE 50, SUZUKI GRASS TRACKER Big Boy, YAMAHA SR500, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E, SUZUKI GRASS TRACKER, Others , YAMAHA SR400, HONDA MONKEY, YAMAHA TW200, HONDA FTR223, HONDA FTR223
Caution when installing
It is an inexpensive product, and since it is made by a long-established manufacturer, there should be no problem with the quality of the handlebar.
Two requests for improvement.
(1) The paint is too soft and just a slight touch will cause wounds. (2) Extreme care must be taken when installing this product.
I would like the center mark to be engraved instead of Sticker, because Sticker is too hard and peels off easily.
View detail
Is it no wonder it bends so easily….
I am using it on a HRC Grom jc92 and the Switch box interferes with the Shroud unless I add a Handlebar Stopper.
I use the 4th one because I prefer the Position I get with the Handlebar in Kochira. The reason why I use the fourth one is that it bends easily even after a light fall during a practice run. It would be nice to have a little more strength.
Well, I'm just saying, as long as you don't mock it up (laughs).
View detail
5 month wait
The wait from order to delivery is approximately 5 months.
In SNS, etc., I think it is quite good, with the Position in between NORMAL and Separate handle, with inverse attachment.
I would like to install and review the product as soon as it arrives.
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI 250TR, HONDA MONKEY, HONDA MONKEY, HONDA HORNET250, YAMAHA XJR400R, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, Others
Stable Made by HURRICANE
Purchased to change the Position of gsrj.
I bought it because I could see detailed dimensions in the drawings.
As a result, after installation, it didn't fit me and I had to replace it.
They are sturdy and come in a variety of types.
This is a product that can be recommenedation if the position is right.
View detail
Fits: SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI RV200 VANVAN, KAWASAKI BALIUS2, SUZUKI GSR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100, KAWASAKI ESTRELLARSCustom, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
I knew it. HURRICANE.
I decided on this Handlebar after much consideration of height, pull, angle, etc. The only thing was that it was a little long. The only thing is that the length was a little long, so I decided to go with Quantity:Pair (for Left and Right) I have slightly packed the Installation is just about to begin, but I am looking forward to seeing how it will change. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA FTR223, HONDA FTR223, HONDA GB250 CLUBMAN, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, KAWASAKI W400, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI BALIUS2
The position is now to my liking.
I was looking for a Pipe Handlebar with a lower position than my current Handlebar and found this Handlebar.
Compared to the Handlebar before replacement, the Position is now lower and slightly narrower.
This was the best position for me personally.
View detail
Fits: HONDA CB400SS, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI BALIUS2, SUZUKI RV200 VANVAN, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI GSX400
Connection to Tommaselli
Timing was not available for Tommaselli, so I bought it in time
The looks and Position are great, but … it won't pass inspection. w
View detail
WeBig side wrong product exchange support
I received a Handlebar for a different model and tried to exchange it, but it kept giving me errors, and there was no phone support, so I had no choice but to post an Impression with a rating of 1, and Customer Service contacted me by email.
They wouldn't give me the name or phone number of the person in charge, so I just kept emailing Yari Bird and they managed to replace it with the Handlebar I ordered.
I give it a rating of 3 because the products they offer are the largest in the industry, but the after service is not very good.
View detail
Fits: YAMAHA TW200E, YAMAHA TW200, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI RV200 VANVAN, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS2, KAWASAKI ZEPHYR1100, KAWASAKI W400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI 250TR, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA APE 50, HONDA APE 100, HONDA VTR250
The texture is good
It is easier to work with CenterMark for positioning and Memory for angle adjustment, but
I was able to work with BrandSeal as a landmark.
View detail
It's okay
Position is now easier
It took me a while to install it, but I managed to do it.
The weld spatter at the bottom of the weld was painted without finishing it.
It looks very bad in that area.
Whenever you have time, you can scrape off the sputtering morsels.
I'm thinking of repainting it.
View detail
Fits: HONDA glom, HONDA glom
Pre-drilled holes for pumping
Pre-drilled holes for pumping
And for all the Machines we've seen so far.
Go ahead and use the black paint.
I'm feeling a little weak.
I chose Black again this time.
Handlebar position has been changed.
The position of the brake master has been changed.
Strain on the brake hose.
Mirror position also needs to be fine-tuned
Position is certainly good.
It is similar to the Image in Separate handle, but
The overall width will be wider than NORMAL.
From OEM position
Forward, Low, Wide
But if I wanted to, I could change it to
Forward, Low, Tight
If you have all three.
I personally think it's better than that.
View detail
Fits: HONDA CB1100, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA FTR223, HONDA FTR223, HONDA NC700X, KAWASAKI 250TR, KAWASAKI W400, SUZUKI RV200 VANVAN, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, Others , YAMAHA TW200, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW225E
When in doubt, this is it
HURRICANE HURRICANETrucker special Φ7/8 inches Handlebar Steel was needed for this one, so I bought it.
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
I bought the product and I don't feel like I'm losing money
As far as shopping goes, I felt like it wasn't a loss
It is a product worth the Gold amount
View detail
Fits: HONDA CB750, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1100, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI RV200 VANVAN, SUZUKI GSR400, KAWASAKI BALIUS2
Feel free to change the position
I wanted to move the Handle position up and back a little bit, so I changed from the RENTHAL that I had been using.
My impressions with it are...maybe a little too Upright...after all, the BMConti3 model might have been better.
There are a lot of lineups in this Handlebar, so you can try to change the position based on the dimensions of this Handlebar.
I selected the Iron Handlebar Black Paint Spec. for this project, but I felt that the paint quality was not as good as it could be. The paint film is thin/weak feeling. In fact, a lot of Wound is attached at the time of installation, and in addition, the paint is peeling off the Choke Lever sliding part (of LeftHousingSwitch) also after a slight period of use. Next time you will probably choose something other than the Black paint spec.
View detail
Awesome Product, but a few issues
Purchased these handlebars for my 2016 FZ-09 to replace the stock handlebars. The installation was very straight forward, but there were a few issues. 1. Stock Brake Master Cylinder gets in the way of most aftermarket windscreens. I had to remove my PUIG windscreen to install the Hurricane Fat Swallow handlebar. 2. Throttle cables had to be routed above the brake reservoir to prevent the throttle cables from binding. 3. Had to grind some of the plastic trim around the ignition to provide room for the clutch cable. 4. The stock brake line ends up on a 90 degree bend using the factory setup. Luckily, I'm upgrading the brake lines to braided stainless steel and will route the front brake line differently. Otherwise, you will want to disconnect the front brake line and route it differently. Overall, I am very happy with new sportier ergonomics on the bike that the Hurricane Fat Swallow handlebars provide. Just be warned that you will have to make some modifications for the clutch and throttle cables and be very mindful of the front brake line. View detail
Fits: YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900
Halfway to the front leaning posture
I am used to leaning forward in a forward leaning posture, but I can't hold my upper body in a fixed position, and I have a hard time holding onto it It will Once I got used to it, it was fine and easy to operate, but at first it felt indescribably strange, STD I decided to change the Handlebar because it feels like I'm on a wr and it's wide enough for me The OEMOption buffalo handlebar would have been better View detail
Fits: HONDA glom, HONDA glom
watchman
I thought it was a staple in Grom's Handlebar …
Basically, I'm happy with what I expected However, I have one complaint The paint peels off easily I rubbed the switches during installation and the paint came off It's not so much noticeable, but the durability is questionable
View detail
Limited Adjustment Range
If you don't clamp the cable in a very high position, the Clutch Cable will touch the meter
I want to use it with as low a position as possible, but it looks like a squeeze handlebar Usage
When I asked about it, since it's guaranteed to be We-Big's compliant product, the Manufacturer's response was It was like it was a custom part so it was inevitable
It is certainly possible to install it, but it is difficult to adjust it with little flexibility
View detail
Fall and to for Repair.
Bend with a fall at Circuit and purchase as for Repair.
I think that I am thankful for purchasing Parts,
Although it is only Handlebar, Quantity : I am dissatisfied that the sense of cheapness is thin compared to Set.
View detail
It's neither good nor bad
I wanted to raise Handlebar a bit more than OEM
I bought it.
fiSpec. Because it is expensive as Wire exchange
We exchanged in the range of OEMWire compatible.
View detail