Flat Continental Type-4 Φ7/8-Inches Handlebar Steel
- Product number: HB0064C-01
- HURRICANE
- |
- 4.5
- (6 Reviews)
Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
CB1300SUPER BOLDOR 10-12 *Processing of switch hole drilling required|* Side cap required (for inner diameter φ18mm)
CB400SS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
CB400SF -98 NC31 *Processing of switch hole drilling required|* Side cap required (For inner diameter φ18mm)
FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
Show more
W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
ZRX400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX400II *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
Show more
GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
ST250 -07 (NJ4AA)(Carburetor) *Need to drill switch hole|*You can use normal side cap. |*You need to change the direction of the brake banjo.
ST250 E Type -07 (NJ4AA)(Carburetor) *Need to drill switch hole|*You can use normal side cap. |*You need to change the direction of the brake banjo.
GRASS TRACKER -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GRASS TRACKER 09-12 43355(FI cars)*Side caps can be used for stock.
Show more
Product Detail
Specification
[Handlebar color] Chrome plating[Handlebar specification]
・Outer diameter Φ22.2mm / inner diameter Φ18mm
・Stock cables and hoses can be installed on as is
[handlebar size]
Total height: 35mm
Full width: 670mm
Effective width of holder installation part: 120mm
Pullback size: 130mm
Insertion angle: 20 degrees
Forward leaning angle: 45 degrees
Description
Made in Japan.Prototype, installation confirmation and mass production are all under in-house management.These handlebars are made with a great deal of care and attention to detail, including careful selection of materials, several types of polishing, engraving of part numbers, high-precision bending and welding, and high-quality surface treatment, based on technology and know-how cultivated over many years in Osaka in Japan.STKM13A steel material with excellent tensile strength is used.Cleared by JMCA safety standard value.Triple nickel and chrome plating (3 layers of nickel and chrome) finish with thick film and excellent durability and corrosion resistance.
Note
For the list of optional parts such as cables
Monkey Handle Holder is here.
7/8 Inch Road Model Normal Handle Size Chart
7/8 Inch Scooter / American Model Normal Handlebar Size Chart
1 Inch American Model Normal Handle Size Chart
Caution
*Handlebar clamps (holder or post) in the photo are not included in the product.
*Sizing shown is for a horizontal position.
*Images may contain other colorings and types.
Applicable Models
CB1300SUPER BOLDOR 10-12 *Processing of switch hole drilling required|* Side cap required (for inner diameter φ18mm)
CB400SS *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
CB400SF -98 NC31 *Processing of switch hole drilling required|* Side cap required (For inner diameter φ18mm)
FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
Show more
W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
ZRX400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZRX400II *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
Show more
GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
ST250 -07 (NJ4AA)(Carburetor) *Need to drill switch hole|*You can use normal side cap. |*You need to change the direction of the brake banjo.
ST250 E Type -07 (NJ4AA)(Carburetor) *Need to drill switch hole|*You can use normal side cap. |*You need to change the direction of the brake banjo.
GRASS TRACKER -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
GRASS TRACKER 09-12 43355(FI cars)*Side caps can be used for stock.
Show more