Reviews
Elf Gloves
I've never used anything but Elf Gloves, I've used them for 2-3 years and replaced them, and since I only ride on holidays, if I use them until they have holes, they should last more than 3 years. View detail
It's more Design and Brand-like than functional.
It's like city glue in the summer. I'm looking forward to summer coming and now I'm using it as Gloves for Motorcycle. View detail
A disappointing purchase.
The quality is good, they are sturdy, good looking leather gloves. The problem for me is the dimensions of the glove- While the index finger length was perfect length ..the other finger lengths of the glove were a size too big. So I can only recommend these gloves if you have abnormally short index fingers. View detail
I've been waiting for a long time
I've been waiting for a long time Order and other gloves shipped I can't change it. I promised to use it roughly, but I don't like it View detail
somewhat thick
As Inner Gloves are slightly thicker, they are warmer.
However, if you put on thick gloves that are too tight, the fingertips will be compressed, and the fingertips will be cold. 。
Consult with the Gloves you have on hand.
View detail
The sense of Size
I'm new to Motorcycle so this is my first time to buy Winter Gloves. I was looking for the size XL recommended by a YouTuber, but Webig didn't have it in stock, so I bought the L size based on the SizeChart. I returned it because the hand circumference was good but the fingertips were too long, dropped the size to M and ordered again. When I googled, I saw that it is normal for Winter Gloves to have about 10mm of room at the fingertips, so that's OK. (I'm glad I didn't buy XL because the hand circumference itself was a little tighter than the L. Even if I had looked at the SizeChart while buying, I would have felt this size. My hand length is 19.7cm and hand circumference is 23cm, so even if the hand circumference can't be helped, the fingers are still long. We also tried to keep warm. The outside temperature was 1°C and we drove for about 30 minutes in the city center. 20 minutes into the ride, my fingertips started to get cold. I knew I needed a grip heater or an electric heater in this temperature. View detail
I've managed to use it by applying a lot of Wax to soften the skin, but the skin is very hard. And the position of the Protector is not so good. 。 When I gripped it tightly, a part of the Protector hit the back of my hand and I felt pain. The thermal protection performance is not as high as I had expected. I thought this is what you get for this price. I live in Yokosuka city and Miura peninsula is relatively warm area, but my fingers feel numb in the middle of the night or in the morning. If it were in a colder area, I don't think I could stand it.
The product looks very nice and I am generally satisfied with it, except for the texture of the leather and the fact that the Protector hits me, but I have to give it a lower rating for the cold protection and the hardness of the leather.
View detail
High cosmetic satisfaction
This is a replacement from Berrick Winter Gloves. This is my first pair of FIVE Gloves. They are for winter, but they are thinner than I expected. I was able to use them for a short time touring at a temperature of about 8 degrees Celsius without any problem, and my fingertips did not get cold. View detail
not as good as one would expect
It is thick, difficult to operate, and not as warm during operation as expected.
The fingertips get cold in spite of the thickness.
View detail
I don't think we'll get single digit temperatures.
I was looking for gloves that could be used in the middle of winter other than electric gloves, and chose Power age gloves with a good feel.
It is full of cotton and looks quite tough. However, the Grip and Lever are very easy to operate, and I think they are Power age gloves. The fingertips are also filled with padding, so be aware that it is very difficult to unlock the shield lock with the ARAIHelmet. At temperatures in the teens, they will last 2 hours. Once it starts to cool down, it doesn't take long before your fingertips start to hurt. I like the design of the gloves, so I try to use them as much as possible and then switch to the electric gloves in the middle of the day.
View detail
Size is too loose for Mechanic Gloves, one size down is recommended.
I had been using DRC's Mechanic Gloves for a long time, but they were discontinued, so I bought these new ZETABrand Mechanic Gloves.
Compared to DRC's Mechanical Gloves, the size is too loose, and if you buy the usual size, there is a lot of room around the fingertips and palms.
I think it is a bit tough as it is because the fingertips of the Gloves get caught when doing detailed work.
I am usually a M Size, so if you are looking for a glove that is Exactly as Mechanic Gloves, I recommend you to buy One sizeSmallest Size.
View detail
M Size is a large size equivalent to L Size.
[How is it used?
I used to use Komine RACING Gloves, but I started using a motorcycle to commute to work and wanted a pair of gloves that I could put on and take off quickly and easily. However, they were unexpectedly large and it was more convenient to be able to operate a smartphone, so I ended up buying DAYTONA's Cow leather Protector Gloves in S Size again.
Was the one you received as per Image?
The Brown shade, which is not too bright, was just right. The country of manufacture was Pakis Tan.
[How did you feel about the Fit?
I have used gloves of various manufacturers, and the M size was just right for me, but in the case of DAYTONA's gloves, the M size was as large as the L size, and I could not use them at all. The leather is very soft, but it was hard to feel as it was when I bought it, probably due to the lack of oil, so I applied Cream for Leather all over it and it became very soft after about a week. Only the Magic tape on the wrist was just the right length.
How was your experience with it?
The size is too large to be useful. I think the leather texture is good for the price.
[Was there anything that disappointed you?
The Size notation is detaLame.
How did it compare to other products?
It is a large size, equivalent to the L size of other manufacturers.
Other items that would be helpful
Opinion or request to Manufacturer:It is a pity because this is a very good product if only the Size description was appropriate.
View detail
It wasn't bad.
I had been using SP-8 for many years and it was getting tired, so I decided to buy SP-8 next time.
Minor changes have been made to the design, etc., and a wrist-stopping band has been added for a more fit feel.
It was a good impression.
… but the stitching on the index finger of the Right hand is distorted and the sensitivity of the phone Touch is significantly poor, so I asked for a replacement.
I think the sewing in this area is better handled in the old version.
The product was found to be defective, but there was no replacement in stock, so it was returned Gold.
Perhaps it is an individual difference, but it is unfortunate.
View detail
Warm but thick
Was the one you received as per Image?
When I was heading for touring around Urabandai at the end of October, I was wondering what I should do since 3SeasonGloves are too cold, but I don't have Winter Gloves, and I can't put a Handlebar Cover because I'm not a CUB.
I thought to myself, "Shut up and buy Winter Gloves," but I didn't have any Gold, so I tried a bad idea with these WIN de BlockInner Gloves.
[How did you feel about the Fit?
From other users' impressions, it seems that I have large hands, so I chose the M size, one size smaller than usual. I think it is a good idea to buy a smallest size, because the operability of the inner gloves will be significantly reduced if you do not choose the smallest size due to the characteristics of inner gloves.
How was your experience with it?
Again, as I knew from other people's impressions, it is quite thick. It was about twice as thick as I imagined.
I was able to fit LimitGloves inside, but I had to take them off because the fingers were hard to bend and the grips were hard to grip.
[Was there anything that disappointed you?
I guess it's the thickness. I didn't expect it to be this thick. Because of this, it is better to check Gloves in person.
What are the specs of the product, such as protector?
None in particular. But I think it will improve protect performance a little.
How did it compare to other products?
I will look for something a little thinner.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
The warmth was quite good, so it would be great if you could make Inner Gloves half as thick as these.
View detail
It's gotten lame….
I buy these every year and have no problems with fit, grip, or wind resistance. 。 The! Every year, the design changes a little, but this year's is a little tricky. or so I thought. 。 The detail and this HONDALogo are gone. The color is also very dull in real life. The previous Cream color was the best. Well, I'm looking forward to next year! View detail
How about thermal protection?
It said the lining was boa, but in fact it seems to be regular fabric.
I tried it on but it didn't feel very warm, is it windproof since it is Goat skin…?
However, the fit and grip are very good. The drawback is that it looks a little cheap-looking.
View detail
Fit feeling is good.
The Magic tape part ripped off and it didn't last one season. View detail
It's normal
I was looking for a replacement for my summer Gloves as they were starting to show signs of slippage.
I bought FIVE because it was my favorite Manufacturer and was at Outlet price.
The size is L in HYOD and M in TAICHI, and this time it was M and Exactly, but the thumb is long compared to the length of the middle finger.
Since I purchased it in October, I haven't used it in midsummer yet, but it is so airy that it is cold when the temperature is around 15 degrees Celsius.
The Protect has a minimalist impression, but it is easy to operate for that reason.
Outlet price would be a good buy.
View detail
Not for people with short fingers?
I usually do a thin Inner and then Gloves.
Inner or not, it is easy to slip in and out, and the long wrist part makes it easy to pull on and off.
During the day it feels hot when the temperature is high, but if the temperature is below 25-Degrees, it does not matter if you run.
On the other hand, if the temperature is below 10 degrees Celsius, or before sunrise or after sunset in spring or fall, it will be chilly, so it is better to switch to Gloves that claim to be for winter use.
I purchased this product for use during the day in the spring/fall and it did just fine,
Fit feeling evaluation is that the thumb and index finger are "One." and the rest of the fingers are Five." It is
The Protector on the back of the hand is also so small that you can't even tell it's in there when you grip the Handlebar.
I have a Large palm size (175cm tall), but my fingers are short for that size.
This is the first time in my life to wear DAYTONA gloves, and I chose a size (L) that seemed to fit after looking at the size chart, but with my hand wearing a thin inner, there was 1.5cm left on my thumb and 1cm left on my index finger.
This did not allow Blinker to operate.
I thought about selling it at a flea market or something, but decided to shrink it and use it.
Fortunately I don't care about looks, I'm OK with most large as long as they are practical, so I'm going to use them shortened by sewing them on with Harris or something.
I envy people with long fingers.
I don't know about the protective construction as I haven't rolled it. I have high hopes for it. Three. It is
Once you get used to the Touch panel on the phone, the response is almost perfect if the phone is in new condition.
View detail
Phone Touch part and PalmSlider are very slippery
I bought it to use with vSTROM1050XT, but the cheap Nylon-like material of the Touch part of the phone is incompatible with Lever and it slips, and the PalmSlider is in a bad position and the material is hard, and the shape is also flabby and has a large area. The PalmSlider is not well positioned, and the PalmSlider is hard and has a large surface area.
In general, the material of the Goat skin of the palm also has a low elongation rate and is very slippery, so I did not need to do a test run and sold it.
View detail