Reviews
Takegawa super multi TFT meter
The installation manual is in Japanese, so it requires some interpretation, and the photos in the manual are blurry and difficult to distinguish.
It is not very difficult to remove and install the existing product on the actual bike.
I think even beginners can install it on their own.
Among Monkey 125 instrument panel products, its performance is expected to be by far the most overwhelming. -------------------------------------------------- -------- There is a manual for mounting in Japanese, which requires a little interpretation, and the photos of the manual are blurry. It is not very difficult to remove the existing product from the actual bike. It is thought that even beginners can be equipped with self. Monkey 125 dashboard products are expected to be overwhelming. Powered by Google Translator
View detail
Use a multimeter
I am happy that most of what I think is in the Meter is now installed and running in my new car,
I just wish there was a fuel economy indicator....
View detail
Shipping costs are high.
The shipping cost was 500 yen for an item that could fit in an envelope, which is a rip-off. I wanted to buy it somewhere else, but I had to buy it because there was a Point that was about to disappear. There are some air bubbles in the corners, but they are easily removed with Microfiber Cloth. Place it where it will not be disturbed. Takegawa. I like the logo. I think it is better to put it on as soon as you buy Motorcycle, like a protective film for your cell phone. I had to wait two weeks to get it, but I can recommend this product. If you can buy it cheaper from other companies, I think it's better to avoid buying it here, where they charge 500 yen for shipping. View detail
It is rather easy to paste!
I am glad that it was easier to apply than I expected! View detail
Solder failure
Blinker signal line Solder defective
Since it was purchased new, I assumed there were no initial defects, so I removed the tank and inspected the wiring extensively.
I'd really like to charge the actual cost.
View detail
Beautiful Dashboard for CB400SF
You can see from the collage pictures, the before and after applying the CB400SF meter panel. I have chosen the silver colour to match my bike. The whole dashboard looks so much livelier, it brings out the quality of the Honda CB400SF. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom
The effect of wearing it is effective.
I installed it on a MONKEY125 JB03 for my wife.
His wife rated it well and it seems to be easier to drive.
I was breaking in a new car and was not sure what speed the GEAR was coming in, so I was anxious, but it was resolved.
The texture is not bad, but for this price, I wish the Included Parts:for installation were made more sturdy.
View detail
The best instrument for your Honda CT125 Hunter Cub.
The original speedometer that comes with the CT125 is poorly illuminated and offers very limited functionality which really lets the bike down. Enter Webike and the TAKEGAWA 'Super Multi TFT' meter. It fits the location of the factory gauge via a included bracket, and is fairly easy to fit to your bike. One major issue that most purchasers face is the lack of instructions in English. Google Translate or similar certainly help with this. That is the only negative, the fit and function of this instrument is fantastic. Bright, large font where needed, a very modern TFT display and needle sweep of the tachometer on ignition. Information such as speed, RPM, time, date, external temp, fuel quantity and other speed, shift light and alarm settings make for one excellent gauge. Service from Webike Japan was excellent as expected, and I received my parts as ordered within a few weeks. View detail
![Digital Meter Bracket [TYPE B]](https://img.webike-cdn.net/catalogue/10317/414-011-0400_image-1_TS.jpg)
YOSHIMURAProgress2 Mounting Bracket
GSX-R750Initial Model can be installed with Pinpoint View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW R1250R, BMW R1250R, BMW R1250RS
It was 2023 and F900XRExactly.
It was SizeExactly. It also works well for sunlight reflection. View detail
Co-tightened to Left SideMirror!
I have been making my own bracket for my Digital meter, but this time I bought a ready-made bracket, which is stronger and of higher quality than the one I made myself. It is better to buy it than to go through the trouble of making it myself. View detail
Good flim
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
lid
I was having trouble without the lid because it seemed to have been lost during removal, and I was able to find a Single Item for sale at Repair Parts.
It is just a Plastic lid, but there is no substitute, so it is a bit expensive.
View detail
Fits: SUZUKI GSX750, SUZUKI GSX750 , SUZUKI GSX750 , SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX1100S
Great quality
Brass sleeves installed on back, if I didn't know better, they could have come in a Suzuki bag and nobody would be the wiser . Exact replicas. Really fast delivery. Price seems a little high each, but at least someone is willing to make the replacements and I do appreciate that. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom
easy to understand
This is a very expensive purchase just to display Shift. I bought this for my wife's MONKEY125. The quality is good and it is easy to install, but the wiring instructions for the Ignition coil are a little confusing. The other locations are clearly shown in the photo, but the Ignition coil was not easy to understand. The location of the Ignition coil was not easy to find because it was marked with the wiring color, but I had to think a bit to find the location. View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Please sell more solid products.
[How is it used?
I was going to order HondaOEM Product for C90 because I wanted to have a meter over 60km/h since I replaced 90ccEngine in my LITTLE CUB that I got. Discontinued. I was told that the product was not rated highly by Webike, so I purchased this product, even though I thought it was not rated highly by Review.
Did you receive the item as per the Image?
It looked OEM-like and nice...but not this.
I'm going to write udderly below, but in a way. As per your Review. The product was not good at all.
Was it difficult to install?
In the era of pure Japan production Iron CUB The wiring around the handlebar is a mess, except for the Second Type Model, which is the most common Injection, and it looks terrible.
The difficulty level is low, so please be patient and follow the Wiring and install it! (And I wrote, but I don't think you should buy it) 。
How did you like it?
Listed in Review Meter stopped working." I have not experienced any symptoms of ... I don't use it that much." It would be more accurate to say that the "new" is a "new".
First, to attach the needle Gold to fix the Meter The claw-shaped part." If you understand the role of this part, even if it is a copy product, you would understand that such a flimsy material is not good enough....
The bulbs that illuminate the inside of the meter are dark & burn out quickly, and are rarely sold at Motorcycle supply stores because they are a different size bulb than the size used in OEM meters since at least the 1990s.
Even before the bulb went out, the Meter was too dark to see at night.
I was so brokenhearted at this stage that I returned to the Normal meter, as I knew from the review that the meter was likely to stop working even more...
Was "Included Parts:" attached?
OEM Product Speed Meter Assembly Similar toQuantity:The Meter is in a Set, with the Meter content bulbs and Wiring built in.
Were there any disappointments?
All of the above is true, and it's more than half the price of what the OEMMeter cost when it was sold, but it's not a product, so it's not a product. Dumping the Gold." I used a Point that I had received in this Review section, so I didn't have to pay for it, but it left me with a feeling of emptiness that all the hard work of typing the text had been lost...
Other items that would be helpful
Point and hang of installation
As I mentioned above, the nails to stop the fixing needle Gold do not function properly, so it will be difficult to install.
[Availability and clarity of the Instruction Manual
No, if you don't know what you're talking about, don't buy it.
However, some may be confused because the color of the wiring is different from that of the OEM Product.
[Notes]
Everything I've written so far. Better not to buy." That being said, I would caution that if you are still interested in purchasing the product, good luck.
[ITEMS TO BUY TOGETHER
A used OEMMeter that you can buy for a price you won't mind paying if it fails."
Disassemble this product and OEMMeter and Quantities:2pc. Set1 (Nicoichi) If we can combine the good points of each other, we may be able to turn it into a good product. (skill & knowledge & willingness to work)
[Opinions and requests to Manufacturer
Now that the Meter for OEMC90 has been discontinued, Don't sell this product! I will not say. I don't care if the price doubles. A product that works well." to the
View detail
Fits: KAWASAKI KH250, KAWASAKI KH400, KAWASAKI SS250, KAWASAKI SS350, KAWASAKI KH250, KAWASAKI KH400, KAWASAKI SS250, KAWASAKI SS350
KH 400,250 ss400Meter cable
I think it is a good cosmetic product. View detail
Opmid multimeter is way better than the Takegawa super dn multimeter
I sold my opmid to purchase the takegawa. I wish I wouldn't have. The takegawa is constantly changing settings on its own. It worked fine for the first 2 months it was installed then all the sudden I have to program it every time I ride my honda monkey. Super dissatisfied with this product. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
I still need Tachometer for ManualMission!
The Tachometer makes driving more enjoyable. View detail
It's a good one, but the cad has been yadda yadda.
MeterThe name "Mukawa" is on the place where it might be hidden if it were attached.
Material:Stainless Steel, a little rough cut, might bother some people?
I was worried about the curds, so a little yas yas.
Sticker is also available in the contents.
It's just that you can't find it anywhere in Site, and that's why it's dimensional.
No overall length because I think it's a bending assumption. (Don't tell anyone that I didn't include it because it was ambiguous due to Caliper's Size.)
I'm sure it varies from person to person, but just as a guide ….
Hole diameter 10.6mm, hole circumference 17.8mm
Meter paste position
Width 43.9mm Height 27.9mm Thickness 1mm
View detail