Buy Original SP Takegawa：Super Multi DN Meter DAX125

Product Detail

Specification

■Speedometer: 0-360km/h
Tire circumference setting (Setting range: 50-210% Setting unit 1%)
Speed warning light (setting range: 30-360km/h Setting unit 1km/h)

■Needle-type tachometer: 0-13000rpm
RPM Warning Light (Setting Range: 1000-13000rpm Setting Unit: 100rpm)
Ignition setting (setting range: 0.5・1-24)

■Odometer: 0-99999999km (display unit: Returns to 0 when 1 km range is exceeded)
Total mileage
User-odd setting (start point distance optional input)

■Trip meters A, B: 0-9999.9km (display unit: Returns to 0 when 0.1 km range is exceeded)
Show / Hide setting of Trip Meter B

■Maintenance mileage
The entered mileage will be automatically decreased as you drive.
Maintenance distance (notification mode)
(Setting range: OFF, 500-16000km Setting Unit: 100km) *OFF is not displayed

■Gear position (Display contents: OFF, All gears (displayed up to 9))
*OFF is hidden
Gear number registration function by learning mode

■Clock (Setting range: 12 hours, or 24 hours)

■Voltmeter (Display range: 8-18V)
Voltage warning light (Setting range: 8-18V) Setting unit: 0.1V)

■Thermometer (Display range: 0-150 degrees)
Temperature warning light (setting range: 60-150 degrees)

■Fuel gauge (Display range: 6 ways)
Fuel sensor resistance preset 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance setting Resistance range: 1-1500Ω
fuel warning light

■Indicator lamps
Warning lights (speed/mileage/fuel/battery low voltage / temperature / rpm *light when item is set), Neutral lamp, High beam lamp, Turn lamp, Fuel level warning lamp, ABS lamp, Engine check lamp
(For bikes without ABS, the ABS lamp can be hidden.)

■External switches: All included with meter

■Backlight
Brightness (Setting range: 1/5 (dark) - 5/5 (bright)
Lighting Color: Red, Orange, Yellow, Green, Blue, Sky, Purple, White

■Installation time: 0.8H

Description

Multi-function meter replacing the stock meter [Super Multi DN Meter]
This is a multi-meter that can be installed by simply replacing the stock meter without any wiring modifications.
Speed, RPM, gear position, temperature gauge, fuel gauge, time, battery voltage display, tire diameter correction, backlight color change, and so much more!!!
Also, since it is almost the same shape as the stock meter and can be installed in the same position, the exterior parts (windshield, etc.) that were installed with the stock meter can be used without modification.
The basic functions for Dax125 (speed/temperature units, stock tire circumference, ignition settings, fuel) are preset.

■External switch
All meter operations and function settings are made using the external switches provided with the meter.

■Selectable backlight illumination color

Caution

*Regarding thermometers.The temperature can be measured at the drain bolt by purchasing SP Takegawa drain bolt separately.
*Cannot be installed with H. I. D. or other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage conversion devices) emit high-voltage noise that adversely affects digital circuits, causing product failure or malfunction.
*On setting the gear position.To set the gear position, both the speed signal and the engine speed signal must be input to the Super MultiDN meter.Therefore, it is necessary to load the data automatically by "actual riding".
*Because of traffic lights and heavy traffic it can be dangerous, so do not set the gear position on city streets.
*When riding, select a road with good visibility, check the surrounding road conditions, and drive with caution.
*Gear position display is switched based on speed and rpm.When stopped, the display does not change even if the gear change is operated.
*The light-up image is the Monkey 125.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.