Reviews
Fairly
The degree of sitting still attached so long distance is unknown
Band obstructs installation in my Motorcycle
Although it was a bit painful, I managed to adjust the position of the band and managed to manage it
I think that I feel pretty familiar
I am looking forward because I run a long distance nearby
View detail
Fairly ...
Until then, I was wearing the weight of the Grip end, but with this BIG I feel that the vibration of the Handlebar has been alleviated somewhat.
It might be a little heavy ...
View detail
Posture approaches NAKED, comfortably.
Height 167 cm. Although it was MOTARD feeling strongly at OEM, after replacement it became quite natural position, regime. I think that the price is high ~, but exclusive items of fluff stones. View detail
Reduction of fatigue
Attached to 2 st off-road
Seat is not rigid for racing use, it is used for something a little solid with Large texture.
As expected, it can not cope with the 2 minute special vibration.
However, due to the fact that Gel strikes the hard part of the buttocks and the anti-slip effect, long distances are relieved and fatigue caused by Seat can be reduced.
Magic tape part is firmer than I thought, adjustment is easy and there is a sense of security. So far Gap is untouched.
Quality is not complaining overall, but the material of the lining seems a bit miscellaneous. Lining is concerned about durability.
Although I thought that Seat High had some influence, I did not mind.
So far Waterproof nature is also no problem.
It was somewhat expensive shopping, but exactly "Japanese cushion" It is the impression that. I thought whether there was an effect for reducing fatigue caused by Seat.
View detail
Because it changed to Pipe Handlebar ....
We installed Pipe Handlebar Kit on ZX - 14R so it was fitted to prevent Handlebar shake.
Although we did not understand the change before and after installation, the weight of the Bar End at NORMAL was quite satisfactory and Separate handle itself was also heavy, so its Spec. Weight should be earned to get close to.
Because the texture and shape are good and the price is so so, it was a product that did not feel unsuccessful even if you purchased it.
View detail
It's pretty good..
I attached it to Dtracker.
With attached Band?, I fix Seat and install Seat, but handling this band is quite difficult.
In truth, I'd like to set it on a tight fit and prevent Seat and Gel Zab from floating, but I can not do it from the structure of Band and Seat that I turned around.
So, Seat and the gap in the lateral part of the Zab (a little) I can do it.
Well, as long as you get on, it does not matter.
It is thinner than I thought, is the effect feeling?.
Those who run long distances are indispensable.
View detail
Exchange for vehicle inspection
Adjustable formula Separate handle (World Walk) Although I was using a thing of, I exchanged it for the automobile inspection.
Material : It is very light in Aluminum, but there is a very rigid feeling, and the ride attitude was also very easy.
Replacement itself has already opened to a place where the holes are right, and it was truly non-machining and could be replaced.
The World Walk's adjustable Separate handle remembers that it took time to replace, though the hole was open, but it was a misplaced place or there was a problem with accuracy, but I could exchange this with Smooth It was.
Thanks to the rigidity during running, I feel that the vibration has become less than before.
A cheaper Handlebar is also sold, but I think that it was good for this.
View detail
Vibration reduction
I attached it to the XJR 1200 and it was running for 2 hours at high speed but leaving running but after all the hand gets numb after all compared to the normal Bar End.
However, the vibration of Mirror seems to be reduced and I feel that it has become easier to see.
Although it was also in other Impressions, it seems that the part of Rubber is left behind in Handlebar when tightening too tightly, so I installed it a bit.
View detail
Is it working ??
I feel that I can not understand much about the effect of what I attached.
I think that it is better than not attaching anything.
View detail
Easy??
We used GSR 750 for GLADIUS 650650.
The OEM had a shape which was raised considerably in the upward direction, and it was considerably bad as looks.
After the exchange, Handlebar is low and wide, I think Parenthesis improved with Mirror and Lever.
Although it is Silver 1 option in OEM diversion, it is one of the reasons why we chose this item to be able to choose Black, not to puncture Switch box.
View detail
Before use, it looks good
I bought it for improving Position of GSX 1300 R HAYABUSA. GSX 1300 R HAYABUSA personally dislikes Bar handle and Position up spacer from the point that Fork top is downward looking downward.
I do not know if it will be helpful because there are few images that understand the difference between Position, but I will put an image. Even though it is still unprinted, the upper body will rise even if it straddles and it seems good at Touring etc.. Also the texture of Cut-out was good and the surroundings of Handlebar became beautiful.
As for installation it was easy as it can be done without removing the Top Bridge!
View detail
For vibration prevention
VTR 250 bought in second hand (Handlebar is Aluminum Other Company Product) I purchased it before delivering it by measures against vibration of.
VTR 250 had less vibration in his hands, so I wonder if it was meaningless.
Iron Pipe handle would be fine, but Aluminum Pipe did not keep the hole diameter 14 mm all the way, so Weight diameter is machined thinly with a lathe and installed. Still the Rubber diameter was Limit.
A person of Aluminum Pipe needs to check the state of inner diameter and purchase.
Though it is a thing, unlike other companies, it has a structure to insert the Grip end part into Pipe, so it will be safer because it will not move on falling.
Although it is riding KATANA, it will kill the vibration considerably, so if you are troubled, try it
(KATANA further changes the Grip end to heavy)
View detail
I really like Separate handle...
NORMAL 's Handlebar is too wide and not favorite, and it is motivation for purchase to be a vehicle type Exclusive Handlebar.
The actual size is several centimeters, the Grip position is on the inside, and the front is coming, but the appearance is a level that I do not know unless I say it.
Because of the same height, subjectively, I do not feel the big difference between Large.
It's saved because there is a Memory from Center in HandlebarCenter.
Replacement procedure from PLOT to You Tube Since the movie is released, it will be helpful.
Grip If you want to change the position and diaphragm, the price is not so expensive, so it may be worth replacing.
View detail
Position Batch
It is slightly Down from Normal handle but it is battle for me! If it gets too low, my waist becomes painful but it does not change much with NORMAL, but it is Fit from NORMAL. I also like Gun meta's shibuy color. View detail
This is about the better Standard
? 【What made you decide the purchase?】
The original Handlebar width was not suitable for me, so after riding the stiffness around the shoulder blades was terrible.
? 【How was it actually used?】
As Size is almost unchanged, the ride of XSR 900 does not change greatly, because the inclination was narrowed, it became easy without stretching your shoulders.
? 【Was it difficult to install? (Hard parts case)】
It was easy and comparable as it was just removing the main Bolt.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
Removal of Bar End and Grip is hard so be careful.
? [Is there anything I was disappointed about?]
It's Aluminum Handlebar so I turned on Bar Weight. Still there is a little vibration at high speed, although it is within the practical range.
? 【Have you compared items?】
HURRICANE's FATSwallow handle
View detail
EFFEX Handlebar Weight BIG
product information It only states that it is used with Handle Bar, Outer Dia. 22.2mm, but doesn't specify that it is used with Inner Dia. 14 mm., causing misunderstandings. Cannot be installed with existing Inner Dia. size 18-19 mmm. View detail
Pain relief in the buttocks
I bought it for long distance touring because my butt hurts. Long distance Touring eventually makes my butt hurt, but I think that there is a difference between the presence of this and the absence. Those who do long-distance touring often think that there is no loss by buying. View detail
Color, Design is best for MT09 Match
There was a person wearing it on YouTube videos and that person's Review, Design, Matte Black color was the best match for MT 09. View detail
It was not as low as I thought
It was not as low as I thought, but both feet came to the ground.
With this, it became possible to ride on Motorcycle with stability, so it was very good.
View detail
I think it's good
I removed the hand guard of Racer, but I disliked the handlebar vibration and bought this part.
We can not compare because we have not tried in the absence state, but since we have not deteriorated against the condition with Hand guard, we think that it is selfishly effective.
Handlebar I think those who are concerned about vibration are worth a try.
I chose the diameter for Aluminum, but in W Racer Normal bar there was somewhat Wobble.
I adjusted and mounted it with Vinyl Tape.
View detail