Please login to check coupons
Product Detail
Specification
[Color] Silver[Material] Aluminum
[Size]
・Handle Diameter: Φ22.2
・Inner diameter: 14.6mm
・Hanging angle: 7 degrees
・Compared to stock end section: Approx. 19mm up
[Specification]
・Polished
・Hole machining: Switch hole machined
[Country of manufacture] Japan
Description
●The slightly loose hanging angle reduces the feeling of tightness at the wrist.
The droop angle was eased by about 3degree and the parallelism was moved upward by about 5mm.It is possible to form a relaxed riding position with a lightly raised upper body.
●Separate structure for fine adjustment.
The handle holder is equipped with a positioning function so that the normal aperture angle can be reproduced (detachable).By using 3D CAD, we have achieved both fine angle setting and high rigidity by using one piece.In addition, the separate bar is 5mm longer than stock to allow for wider handlebar width adjustment.
*From the viewpoint of giving priority to the position, the integrated structure is adopted in some models.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●Spacer type is also lined up
Up spacer type is also lined up to use the stock handlebar and enjoy the upright position easily.
The droop angle was eased by about 3degree and the parallelism was moved upward by about 5mm.It is possible to form a relaxed riding position with a lightly raised upper body.
●Separate structure for fine adjustment.
The handle holder is equipped with a positioning function so that the normal aperture angle can be reproduced (detachable).By using 3D CAD, we have achieved both fine angle setting and high rigidity by using one piece.In addition, the separate bar is 5mm longer than stock to allow for wider handlebar width adjustment.
*From the viewpoint of giving priority to the position, the integrated structure is adopted in some models.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●Spacer type is also lined up
Up spacer type is also lined up to use the stock handlebar and enjoy the upright position easily.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The bar ends are not included in the product.*(Not available for stock, recommended: EFFEX Handlebar Weight for Aluminum Handlebars)
