Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
MT-09 14-20
MT-09SP 18-20
Product Detail
Specification
[Material] Aluminum[Size]
・Width: 730mm
・Height: 46mm
・Depth (pull): 122mm
・Outer diameter of handlebar clamp: 28.6
・Handlebar outer diameter Φ22.2
・Handlebar inner diameter Φ14.1mm
・Standing angle: 45 degrees
・Aperture angle: 20 degrees
[Weight] 640g
[Travel (UP/BACK)] 0/0mm
[Specification]
・Hole machining: Switch hole machined
・Clutch cable (hose) fit: Available
・Fits throttle cable: Available
・Brake hose compatible: Available
[Country of manufacture] Taiwan
Description
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The width of the steering wheel is shortened by about 30mm, and the angle of back sweep is added by 2°.The height and the pull are the same as stock.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
●Original design handle for EFFEX models
Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
*For "High", it may be necessary to replace the cables.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●The lever holder can be shifted to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Bolt-on handlebars for specific models
The width of the handlebar is shortened by 30mm and the angle of the aperture is narrowed by 2 degrees, so that the rider can enjoy a more relaxed position.
The width of the steering wheel is shortened by about 30mm, and the angle of back sweep is added by 2°.The height and the pull are the same as stock.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
●Original design handle for EFFEX models
Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
*For "High", it may be necessary to replace the cables.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●The lever holder can be shifted to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Bolt-on handlebars for specific models
The width of the handlebar is shortened by 30mm and the angle of the aperture is narrowed by 2 degrees, so that the rider can enjoy a more relaxed position.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Not compatible with stock bar ends.*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
MT-09 14-20
MT-09SP 18-20
