Reviews
Fits: YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ400F, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250F, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI RM250, SUZUKI RM125, SUZUKI DR-Z400S, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KLX250
Improved serviceability
OEMs can replace the 2-parts configuration of the Hexagon Bolt Pin+Minus screw blind with a single 8mm bolt.
The 8mm bolt is also used frequently for maintenance around the brake area, so the assortment of tools can reduce the man-hours required for the work.
In addition, the OEMs were concerned that the outer screw would burn even if Thread compound was used, and the use of a slotted screwdriver would cause the screw to lick every time it was removed, but due to the characteristics of the screw, the possibility of this happening is relatively low. 。
(We still recommend the use of CopperGrease on threads, as seizure itself will occur.)
Replacing one Brake pin will not make you run faster or ride easier, but it will reduce the burden of maintenance.
View detail
Is there more than just Off cars?
Purchased to install on an '18 SEROW.
Kantan because you just remove the OEM and replace it.
Some blurring occurs when driving, but I don't feel much difficulty in seeing.
It is convenient to be able to fold Mirror at a stop, for example.
Not expensive and very good.
View detail
You shouldn't change it with Fashion.
I found that many other people's reviews said that it was blurred, but I put it on thinking that it is an Other Brand Product, so it can't be helped if it's a little blurred,
It's so blurry!"
There are two reasons for the shake. One is that the joints are designed to stop clicks, but the play between each click is too large to stop the click properly.
Closing the screws until they stop will interfere with folding, and even if the screws are tightened just enough, they will loosen because there is no kind of lock.
Second, the joints are plastic, so they are weak to begin with. Shaking occurs.
As a countermeasure, I changed the Nut to a Self Locking Nut, and since the Bolt length was also insufficient, I changed it to an M6×25 Cap bolt.
It sticks out a bit. (See photo)
I thought this would make it a little better if I fine-tuned it.
Unless you are loading a transporter or running a closed course on your own, you probably don't need to change it.
Parts used by those who really need them.
View detail
Fits: HONDA CROSS CUB110, HONDA CROSS CUB110, HONDA CROSS CUB110
Appearance and performance ◎Installation ×.
The first thing I want to say is that the installation was too difficult.
I installed it on a CROSSCUB110,
Saying it was difficult was also a task that required a lot of strength.
I don't know the proper way to do it because there was no instruction manual, but I made full use of various tools, and I think it ended up taking about 2 hours.
Quantity Spring to Peg:I tried to stick a fixed pin in the set state, but the spring was too hard and I didn't feel it would go in.
To be honest, I almost lost heart several times, but eventually I was able to push it in and install it with the Resin Hammer before my grip ran out.
And the other side was also installed and I was in despair, but I was able to get it on easily without the use of a resin hammeretc.
Is there something like hang,,
I don't know if it's Sense or luck, but I've heard many people say it's difficult to install, so I'd like to see an instruction manual included.
If force is required, it would be nice to have a jig etc. for easy installation.
It would be great if the installation was just finished.
It looks much different and the Grip works well in the rain and gives me a sense of security.
I am happy with the Standing, it is stable and cool to drive.
I do not want to remove it. LOL.
View detail
Not required for all DRCSprocket
I got a DRC Sprocket separately and mistakenly thought this Bolt with Taper was a must and bought it. View detail
Fits: KAWASAKI KLX250R (Competition), SUZUKI TS50 Hustler, YAMAHA TY250Z Scottish, YAMAHA TY250Z Scottish, KAWASAKI KDX125/SR, KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX85, KAWASAKI KX85, SUZUKI DR250S, SUZUKI RM125, SUZUKI RM125
Not included with DR-Z400
It may be good for other Motorcycle, but I can't install it on DR-Z400s. the Bolt hole position was off by about 4-5mm.
I am disappointed because I bought it because it was conforming.
I would like to return it but it is too much trouble to send it back so I will throw it away.
Everyone please take note.
View detail
Fits: SUZUKI RMX250S, SUZUKI RMX250R, SUZUKI RM250, SUZUKI RM125, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, SUZUKI DR-Z400R, SUZUKI DR-Z400E
reasonable price
I recommend this as a very basic model.
I recommend it for both price and durability. Of course, it also helps in terms of appearance.
It is more helpful in terms of neatness than the rubber plate of the original footrest. I think that such small details are of great help when tuning.
The shoes fit perfectly into the body! Avoid bare feet
-------------------------------------------------- -------- Recommended as a very basic model. Recommended in terms of price or durability. Of course, it helps in appearance. It is more helpful than the rubber plate of the genre of the footsteps. Shoes are just wrapped in the body! Please refrain from bare feet Powered by Google Translator
View detail
I wonder if the Spec. has been changed.
I was interested in this product, but I saw many impressions that it had a " mysterious protrusion " and could not be stored completely, so I hesitated to purchase it. It is true that the protrusion has been removed and it can be stored properly. (The vehicle in which it was installed is a 23-year MODEL JA60) However, I think it can be attached to the previous MODEL as well. View detail
This is a highly Universal Tail lamp.
Universal Tail lamp
[How is it used?
I had been looking for a replacement for my KSR-II for many years, but I could no longer install the OEM Product's Tail lamp, so I went to Webike to find one. However, I found this product when I was looking for a replacement for the OEM Product's Tail lamp.
Was the one you received as per Image?
It is a product that is more than an image in the form that has good visibility with the Edge effective design while being compact, and also has universal characteristics that can be installed from off-road motorcycles to road sports type motorcycles without any sense of discomfort. It is a product that is more than just an image.
Was the installation difficult?
As mentioned above, this is a work to install a bracket for Fender Eliminator, which is a self-made bracket, so the drilling and wiring processes are performed in actual products, so it may not be of much help.
After installing it on the Fender Eliminator, all you have to do is connect the wiring of this product to the wiring for the tail lamp on the body of the vehicle, but this product does not have the wiring that is often found in this type of product. "Bullet Type Terminal Spec
Modern motorcycles have connector terminals, so it is easy to find a connector that fits the vehicle body on KITACOConveniencePartsetc. and modify it to make a simple connection.
Fortunately, KSR-II has Bullet Type Terminals for most of the terminals that connect to the lights, so we were able to connect without any modification.
How was your experience with it?
There are no problems with the functionality of the LED bulbs, which have been in place for several years now and are functioning as well as they did immediately after installation.
My personal impression is that the rounded design of the KSR Tail would fit better with the rounded design of the Tail lamp than the pointed design of the Tail lamp. I think that the rounded design of the KSR Tail lamp fits in better than the sharp design.
I had a friend install it on his WR250 after that, and the shape of the tail and the design of this product matched very well, and I honestly thought Parenthesis was good (this is just my personal opinion).
[Included Parts:were they on?
It was a Simple Package with only Body and Instruction Manual.
[Was there anything that disappointed you?
Not at all.
Aside from the above mentioned compatibility, which is a matter of personal preference, I have no complaints about the product design or the kinability of the product.
Other items that would be helpful
Point and hang of installation
This product is a Tail Lamp product, but a vehicle-specific kit that uses this product is also sold by DRC.
The price is a little bit higher, but the Bracket for each car model is also of high quality and you will not feel any discomfort after installation. It's a Manufacturer's product." I am convinced that this is the right product.
For those who, like me, cut, paste, and fabricate to install, please measure the dimensions carefully or do your best to install the product as-is.
[Availability and clarity of the Instruction Manual
An Instruction Manual is included in the package.
[Notes]
Nothing in particular, just be careful not to misplace Wiring.
[ITEMS TO BUY TOGETHER
As I mentioned above, this is also available from KITACO and other companies. OEM Type Connection Terminals by Manufacturer will allow one-touch connection to Harness on the car body side.
Since the method of fixing to the car body varies depending on the car model, it may be better to try a temporary assembly before full-scale installation.
First, check the fixation method by placing it on the vehicle in which you want to install it.
[Opinions and requests to Manufacturer
Please keep up the good work in maintaining prices as much as possible and keep selling for a long time to come.
View detail
Fits: KAWASAKI KLX450R, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX450F, KAWASAKI KX65, KAWASAKI KX80/II, KAWASAKI KX85, SUZUKI RM125, SUZUKI RM250, SUZUKI RM80, SUZUKI RM85, SUZUKI RM-Z250, SUZUKI RM-Z250, SUZUKI RM-Z250, SUZUKI RM-Z450, YAMAHA WR450F, YAMAHA WR450F
Good
Everything was fine, the shipping was fast, the price doesn't include the tax but you can see this information on the website, and they give all documents for easyer and fast administration for the customs. View detail
The construction is not good.
It is not well made and has a playful clatter.
The good thing is that it folds! That's all.
View detail
footpegfootpegRANRANRAN
Simultaneous footpeg exchange is the norm! View detail
Excellent stability.
I installed it on my CRF125F and replaced the OEM one because the Small one slips a lot. Installation was easy. You need a split pin to replace it. It is possible to reuse it, but I think it is better to replace it because it is cheap.
I have used it and found it to be very stable and hard to slip on.
The rest is Parenthesis ?
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ250FX, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X
To Shorten
I bought this to shorten it to make it easier to front up on my Yz125x. The texture is solid and the quality seems to be good. The price is reasonable and I think it is a good cosmetic product. View detail
Good parenthesis with the same color as the body.
CRF250L (MD47) The coolant was replaced as an incidental part of the coolant replacement of the
Compared to OEM Products, Material is Material:Silicon was also there and the product was soft and the work was precise and arrived without difficulty.
The Red Hose stands out in appearance and Parenthesis is good. (^_^)
This will allow me to ride with peace of mind for the time being.
It is softer and easier to wear than the OEM Product.
Recommendation Products
View detail
I need a scale.
I had a Front Fork Oil Level Gauge that was a big dropper with a Memory attached to it, but it was damaged over time. I bought this one, but I think I prefer the one I had before. I wish it had a scale, but I guess that would have increased the price, so I didn't put it on. View detail
Great product Great price!
Great quality looks and feels just as good as some of the top brand sprockets on the market. Have tried a few different brands but ended up ordering this one the last couple times I need a front sprocket. Just hit 60 hours on the last one I purchased and it doesn't seem to be starting to "shark fin" at all or get overly worn out yet. Happy with the results again and again.don't forget the prevailing torque nut while you are in there changing things out. my front sprocket never wears really...Pricing is the best I've seen and fitment was perfect!Will definitely be buying more in the future! View detail
Try it with Bolt of your choice.
[How is it used?
I purchased this product to refresh the exterior fixing bolt of SEROW225WE, which has been used for more than 20 years and has become rusty and lickable.
It is a convenient Spacer that kills two birds with one stone as it is highly universal and looks good because it can be easily matched with Bolts of 12.4π or smaller in size.
Was the one you received as per Image?
Although it is treated as a separate frame from the Spacer made by DRC that I purchased before, it is useful because the design and large size are the same, so I feel no sense of discomfort.
The price is just a little bit higher than the last DRCAluminum spacer I purchased, but it is still Reasonable enough and just like the Image.
Was the installation difficult?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How was your experience with it?
previously sold by each Manufacturer. FUJI TUBO type. Since the outer diameter is larger than that of the Cap Holder, the Cap Holder may not be used in places where there is a depression.
Unlike FUJI TSUBO Type products, this product has a relatively large number of Bolts that can be combined, so the impression of the appearance can be changed depending on the design of the BoltHead, and it can show various faces depending on the financial power (since the price goes up and down depending on the shape and material of the BoltHead) and Sense. (Since the price goes up and down depending on the shape and material of the BoltHead) and Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I really wanted to buy the Red 20-pack, but it was already discontinued, so I could only buy the 4-pack.
We would like to see the 20-packs revived as the price per unit is slightly lower.
The product itself is not disappointing as I like the look and feel of the purchase.
One of the most common Anodized products is Fading due to ultraviolet rays, etc. However, the same DRC-made Spacer that we purchased previously also maintains the same coloring as when we purchased it, so we can expect durability as well.
It may be better to check the actual product if possible, as there are some people who like or dislike the color of the same Red.
Other items that would be helpful
Point and hang of installation
Since it is like a fashion color used in place of a washer when fixing a bolt, it is a simple job to use this product (Aluminum Collar) by biting it when attaching a cap bolt of the appropriate length to the bolt stop on the part where it can be attached.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of use is top level, so I don't think it's likely to be used incorrectly.
[Notes]
As mentioned above, the outer diameter is Larger Thicker than the FUJI TSUBO Type color, so you need to check if you want to install it on an exterior with a dimple.
[ITEMS TO BUY TOGETHER
If the bolt is M6 size and the head size is 12.4π or smaller, it is likely to be Large body and Large sturdy, but Bolts with good parenthesis design are expensive, so please consult with your Wallet and get the right bolt. Please consult with your wallet.
I have attached an image of a few different Bolts that I had at home together, and I would be grateful if you could help me with something.
[Opinions and requests to Manufacturer
I strongly hope you will bring back the 20-pack.
Please continue to sell the product itself as much as possible.
View detail
Decorate your garage with Motorcycle
Think of the purpose of decorating a garage with cars off! View detail
Functions and looks good as a Washer.
[How is it used?
When I replaced the bolt&washer that holds the exterior of my KDX220SR with a DRC-made bolt&washer, it looked so much better that I decided to use it to hold the exterior of my SEROW250. I checked Webike and found that the product I had purchased before was no longer available.
Did you receive the item as per the Image?
And the products I purchased before. Aluminum Spacer for M6φ18 The product introduction column is in a different frame even though it has the same name as this product. I wondered if something had changed in the design, but the product I received had the same design. (I would appreciate that more.) Prices are slightly lower.
I liked the design of the Aluminum spacer I purchased last time, so the price was a little lower and the quality was similar, just like the Image product.
Was it difficult to install?
There is nothing difficult about this product, which is installed by biting it in place of a washer when fixing the bolt.
How did you like it?
previously sold by each Manufacturer. FUJI TUBO type. Since the outer diameter is larger than that of the Cap Holder, the Cap Holder may not be used in places where there is a depression.
Unlike FUJI TSUBO Type products, this product has a relatively large number of Bolts that can be combined, so the appearance can be changed depending on the design of the BoltHead and the financial strength. (as the price goes up or down depending on the shape and Material of the BoltHead). and can show various faces depending on Sense.
The coloring of Anodized is also vivid, and I will continue to use it and see how it fades due to UV rays.
Was "Included Parts:" attached?
None
Spacer made by DRC previously purchased 20 Quantities:I was disappointed that the Set version was no longer available, but this product offers 20 Quantity:Set was lineup and I was happy to buy it.
Quantity:1 Set of 4pcs. means the unit price per pc. is 211 yen, but Quantity:1 Set of 20pcs. is 181 yen, so if you can use it up, you can use the Quantity:1 Set of 20pcs. is a great value.
Were there any disappointments?
I like the look of the product and I am not disappointed with the purchase.
One of the most common Anodized products is Fading due to ultraviolet rays, etc. However, the same DRC-made Spacer that we purchased previously also maintains the same coloring as when we purchased it, so we can expect durability as well.
It may be better to check the actual product if possible, since there are some people who like or dislike the color of the same Blue.
Other items that would be helpful
Point and hang of installation
This product is like a fashion color that is used in place of a washer when fixing a bolt, so it can be used when installing a cap bolt of the appropriate length to the bolt stop of the part that can be attached. (Aluminum Collar) It is a simple job to chew and use the
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is top level, so I don't think there will be any mistakes in usage.
[Notes]
As mentioned above, the outer diameter is Larger Thicker than the FUJI TSUBO Type color, so you need to check if you want to install it on an exterior with a dimple.
[ITEMS TO BUY TOGETHER
If the bolt is M6 size and the head size is 12.4π or smaller, it is likely to be large body and large sturdy, but the price of the bolt with good parenthesis design is also expensive, so please consult with your Wallet to get the right bolt. Please consult with your wallet.
[Opinions and requests to Manufacturer
This timeQuantity:1 Set of 20pcs. was available, but I would appreciate it if you could bring it back as some colors are no longer available.
View detail