Reviews
new setup,great look,cheap fuse
Great sprocket bolt kit! The finish is slightly mat than OEM which looks awesome when paired with a new aftermarket sprocket.Great set of fasteners for replacing the stock ones. They are a little longer and the allen head used is a few sizes larger (doesn't round as easily) than the stock ones did however have to tighten them again after my first ride. After that they have stayed tight. I'm glad i bought these as they work great. Much easier to tighten without being worried about stripping the things.webike too fast,Because it is packaged very well, it is subjected to extra inspection at customs.But the shipping fee is high. View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KSR110, KAWASAKI Ninja 250, KAWASAKI Ninja 250R, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZ6 04-17, YAMAHA FZ6-S Feather, YAMAHA FZ8, YAMAHA MT-01, YAMAHA MT-07, YAMAHA MT-09, YAMAHA TDM900, YAMAHA V-MAX 1680, YAMAHA WR250R, YAMAHA WR250X
I wish it was 10mm diameter.
Purchased to replace LED Blinker.
Maybe it's compatible with Yamaha stuff or something.
Since I could not be sure, I bought a DRC product that I could be sure of.
This product is used between two pieces, so the front and rear blinkers are interchangeable.
2Quantity:Set is required.
Since the mounting hole of this product is 8mm diameter, the Screw diameter of the Blinker to be installed is also 8mm diameter.
The 8mm blinker is used, but there are surprisingly few 8mm-diameter blinkers.
The problem is that most of the products sold at low prices are 10mm diameter and there are very few options.
View detail
Ideal for SEROW
The OEM Fork Spring was not firm and unreliable on heavy roads, but this Spring is moderately stiff and optimal performance can be achieved by using #10 Fork Oil. View detail
Fits: KTM , HUSABERG FE250-501, HUSQVARNA FC250-450, HUSQVARNA FE250-501, HUSQVARNA FX350, HUSQVARNA FX450, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150-300, HUSQVARNA TX125, HUSQVARNA TX300, KTM 125-300XC-W, KTM 125SX, KTM 150SX, KTM 250-500EXC-F, KTM 250EXC, KTM 250SX, KTM 250SX-F, KTM 250XC, KTM 300EXC
Buy Fork Springfor Replacement
I used it on my MY22 KTM250EXC to replace the Fork Spring. It works fine, but a 24mm Spanner would be useful too. View detail
Fits: KAWASAKI KLX230R S, KAWASAKI KLX230R, KAWASAKI KLX230 S, KAWASAKI KLX230
Great place to put your feet up
Very similar to OEM pegs. Black finish proving durable and plenty of grip on my boots. Best of all is the excellent price compared to the exotic works pegs. Great pegs that preform better than the stock narrow pegs. Easy to install and good quality. I'd recommend these to anyone looking for an affordable replacement. Thanks for the fast shipping and careful packaging. A classic Webike shopping View detail
Fits: YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR400F-450F, YAMAHA WR450F, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA WR400F-450F, YAMAHA WR400F, YAMAHA YZ85, YAMAHA YZ65, YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250F
Huge upgrade over stock pegs,Excellent quality and Wide sturdy grip.
Very solid footing with these and they have already withstood a couple of hard falls! Surprising what a difference these make compared to stock! Excellent pegs. Feels like a have a front porch worth of room for my feet to stand on, and they grip to the bottom of my boots like super glue. Easy to install and improved grip noticeably over stock foot pegs.I will say you may have to tweak your stock peg springs to fit around these monsters but still only took 10 min to install both. Great Product, Highly Recommend,webike too fast shipping View detail
Good quality and fit. Needs more adaptors
Don't buy a cheap one! These work, and trust me, you want it to work when you need it. If a pin does break, they are easy to replace but most likely it won't unless you aren't using it properly(read the instructions if you've never used one). I had the unfortunate issue of breaking one of the punch pins, as the instructions say to place on pin and push pin out the otherside. The instructions do not tell you to grind the pin head down before attempting to push out. Great tool, and a must for anybody who maintains their own bike.I broke two chains with this in 5 minutes by myself. Just get it. Even though they recommend grinding out the back of the rivet I didn't and it just worked. Well worth the cost. Just like all of DRC's tool this is nicely made and you can tell it's a quality tool by I get of my orders delivered short time from Webike. Awesome company, and all the Customer support are top of the line and really show the level of customer service Webike delivers to their customers. View detail
Good tool if used as intended.
outer fork tube clamp has a threaded lever on the side of the clamp that closes its jaws tightly on the fork. You can even remove the threaded lever from the outer fork tube clamp, so that the fork tube clamp can be placed in the vise anywhere along its length, not just by the fork dropout. Using the outer fork tube clamp is as easy as sliding it on the fork stanchion tube, tightening the threaded lever and holding the fork vertically while loosening the fork cap or base valve. Additionally, you can lay the fork on your workbench with the long arm of the tool stopping the fork from spinning by bracing it against the bench with the tool’s long arm. The DRC/Enzo outer fork tube clamp makes that possible, easier, cheaper and safer.Good price fast delivery worked perfect.Highly recommend View detail
Great tool if you have many bikes
I have dirtbikes and all the forks are different sizes. Finally bought this tool and now I can have one tool for many applications. I have used it twice and worked great. Stores in a small box and cleanup is a breeze. Very nice and well built tool.works extremely well. The inserts are a very hard plastic. I saw no deflection or deformation during use, but nice in that they are not metal so no tube marring or scratching potential. Metal outer collar is nice and heavy. The metal collar does not snap together, so if you are not holding the tool, it will split. I didn't find this to be a problem, but thought I could use wire ties if needed to hold the shells together.Great product.Webike too fast.packaging is great, delivery is fast.you may not be my friend but you can take the recommendation if you like.Have a great day View detail
Fits: SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI DR-Z400SM, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250 (2019-), HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, SUZUKI RM-Z450
Worked great, simple and easy.
Each job needs the correct tool to work on motorcycle, this tool made it easy, plus there was no damage to the aluminum nut. Be aware that these may not fit on the fork cap when in the triple clamp, so you may need soft jaws or something else to hold the fork tube. I will probably use tools for loosening and final tightening of the fork cap, but will continue to use these for removing the inner cartridge. A must have tool if you work on your own bike. Just like all of DRC's tool this wrench is nicely made and you can tell it's a quality tool by the weight and feel in hand. I get 95% of my orders delivered short time from Webike. Awesome company, and all the Customer support are top of the line and really show the level of customer service Webike delivers to their customers. View detail
Bure & minus; Press Switch, Banjo Bu Type
After about 3 years, the Switch will fail.
I have replaced it about 3 times so far.
Improvement.
Brescia Switch in the rear wheel Brake is
After more than 10 years, it has not broken down.
View detail
Excellent loadability, may be essential for transporting on road motorcycles.
[How is it used?
It is installed in the second row of the E25Caravan.
Since I am usually an Off-road motorcycleMain, I had difficulty transporter an On road vehicle.
It was difficult to pull from below, so we introduced this one.
I could have drilled holes in the Floor, but it was too much of a hassle, so I bought this one after seeing someone I know using it.
Was the one you received as per Image?
This product, which did not seem to be available, is a great way to scratch an itch.
I was worried about getting to Caravan, but it was no problem.
Was the installation difficult?
ScrewQuantity:It's 2pcs, so it's really easy.
How was your experience with it?
Good as expected.
It is small in size and does not get in the way at all.
I don't usually use the Hook much, but I don't mind when I don't.
As a byproduct, a board is strapped to the back of the second seat, which also plays a role in securing it.
[Included Parts:were they on?
Only the one in the product image.
[Was there anything that disappointed you?
Not at all!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I know it's not very demanding, but Quantity:I would have been happy if you could have made it cheaper, even if it was 1 set of 2pcs. or something.
View detail
I think it is the best solution for self-drivers when running offline.
The balance of ease of use, price, design, and quality is excellent.
Due to its structure, it may be slightly affected by vibration, but this is not a Level that is of concern.
As a Mirror for those who run off-road on their own, it would be the best solution.
View detail
Reasonable and sufficient Quality
Reasonable and the texture is also reasonable for the price, but overall I am very satisfied with the product.
Although the foldable structure is slightly affected by vibration, I am grateful for the balance of price and quality in this product, considering that it is for off-road use.
Also, installation is easy and uneventful.
View detail
The size is good and easy to use
Drilling holes in parts was troublesome, so I bought this bolted product. The location of the wire hole and the bolt fixing part are the same size as the head of the bolt, making it easy to use.too fast shipping, careful packaging.Give DRC a chance, trust it. Every piece produced is of high quality and good price.I'm glad to doing shopping from you , Thanks For Everything View detail
Handlebar makes it easy to grip and apply force
I purchased the DRCChain toolPRO for my first ChainDIY replacement.
As a preliminary knowledge, we watched the Chain replacement process on YouTybe and decided on the DRC product, which seemed easy to use.
The handlebar of the product was easy to grasp and support, so I was able to work stably.
The actual work was also very smooth due to the simple configuration of the product, and chain cutting was easier than I had imagined.
I think it is moderately excellent.
View detail
I am satisfied
Installed on klx230sm.
I had already installed a DAYTONA Rear Carrier and the Bolt that came with it was not long enough, so I purchased a M8 P1.25 L60 at Home center.
The installed feeling is Firmly massive as shown in the photo.
As you can see in the photo, there is no interference with the Exhaust System because there is enough clearance on the Exhaust System side.
View detail
To be mounted in the car.
It is useful for in-vehicle use.
Large size is reasonable, foldable, not that heavy, and not too expensive. 1pc. is convenient to have.
View detail
DRC Chain Tool
I bought it to replace the chain myself. The manual is in Japanese and English. The manual kindly guides you through all the processes, so even those without expertise can replace the chain. There is a storage space on the handle, so there is less risk of losing parts. View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ400F, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250F, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI RM250, SUZUKI RM125, SUZUKI DR-Z400S, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KLX250
Improved serviceability
OEMs can replace the 2-parts configuration of the Hexagon Bolt Pin+Minus screw blind with a single 8mm bolt.
The 8mm bolt is also used frequently for maintenance around the brake area, so the assortment of tools can reduce the man-hours required for the work.
In addition, the OEMs were concerned that the outer screw would burn even if Thread compound was used, and the use of a slotted screwdriver would cause the screw to lick every time it was removed, but due to the characteristics of the screw, the possibility of this happening is relatively low. 。
(We still recommend the use of CopperGrease on threads, as seizure itself will occur.)
Replacing one Brake pin will not make you run faster or ride easier, but it will reduce the burden of maintenance.
View detail