Reviews
DL1000 V-STROM250SX exclusive DAYTONA Hazard kit installed
I was looking for a Hazard switch for my DL1000 V-STROM250SX, and when DAYTONA came out with a switch kit for the 250SX, I immediately went to Webike and bought it. As expected of a dedicated kit, there is no extra wiring, no cutting or pasting of wiring, and I was able to install it without worry. Now I can use the hazard lamp on the highway with no worries! Personally, I believe that motorcycles are safer when they are well lit and stand out. View detail
Hazard.
It is easy to install., No problem, good product! View detail
If Switch Refreshing,
It would be perfect if the Switch could be embedded! View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
Not Standard Size
25.2mm, so it will be sandwiched between the rubber plates.
However, Rubber sticks out, does not pinch properly, etc. Stress builds up subtly.
In the end, I managed to attach it, but I was not satisfied with the wobble, the subtle texture, and the fact that it was rather large for a skimmer Switch.
I think it would be better to use a 22mm size made by NAKA0 with waterproof and wiring processing...
Well, it's too much trouble to replace it, so I'll use it until it breaks.
View detail
We used it for Hazard switch!
The other item of the same brand, the Blinker relay with Hazard switch function, is under the Seat, and from there the Wiring for the switch is extended to the switch part on the Axel side, but the length is not enough, so I needed a Wiring extension.
Once attached, the Switch looks as if it has been around for a long time.
Above all, DL1000 V-STROM250SX Color:I like the fact that it is a YellowMODEL with a Yellow-colored switch!
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI Z650RS, KAWASAKI ELIMINATOR
Position Improvement
Handlebar felt far away, so it became quite easy.
It was a little strange because I had to replace it by myself, but if someone supports me, I think I can easily put it on!
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI Z650RS, KAWASAKI ELIMINATOR
Handle position is better but critical Clearance
Installation is very easy and can be done by a woman alone.
The handlebar was moved forward by one bar, and the handle position was improved, which made it easier to drive long distances and alleviate knee cramps.
The problem is that there is no clearance between the handlebar and the tank, and if you cut it all the way to the Left, there is only a few millimeters of free space, and if you cut it all the way to the Right, it touches the tank. If the tank is knocked down, the handlebar will definitely dent the tank.
This place definitely needs improvement.
View detail
Fits: HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250 S Edition
Fast delivery. Accurate product
About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing배송이 빠르고 상품이 정확합니다 View detail
Refreshing with this
I bought this for Refreshing around the Handlebar since I have Separate handle.
It says that the OEM MeterStar interferes with the headlight bracket, but I was able to install it without any problem once I removed the headlight bracket.
It is GOOD to be able to use Handlebar Lock!
View detail
Grip heater
The combination of the Grip heater and the Heat glove considerably warms the fingertips, and the non-slip coating on the Grip part makes it easy to drive without the Gloves slipping. View detail
It is smaller than the original switches of many motorcycles. View detail
Best in cost performance! No hassle with pontoons!
The USB power supply allows for hassle-free installation.
It requires no complicated work and is warmer on top of that.
It is so hot with bare hands.
Switch is graceful, eliminating all adjustment functions with just ON/OFF.
In fact, I have never felt hindered by it.
Above all, it is inexpensive. It was a good choice.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA APE 50, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 100, HONDA APE 50, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA APE 100, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 50
The long-awaited push cancellation type blinker switch!
It was installed on a DUCATI 900 M.H.R.
Since it is not a "one-piece-fits-all" installation, we left everything from product selection to installation to Motorcycle Shop.
Originally a Slide type OEMBlinker switch, the convenience of the Push cancellation type is still obvious.
Since the vehicle had been customized from the time of purchase, there was no need to be concerned about originality, and parts were changed to give priority to comfort.
Use it on the way home from Motorcycle shop. I knew this was the one." I was constantly thinking, "What is this?
View detail
Not bad
The gripping feeling is not bad, but it is hard to press the Button when wearing thick gloves.
The small size of the button seems to have backfired, as if the button was made to be inconspicuous.
Others seem to feel that Grip is a bit cheap?
View detail
Easy to store!
I used it for Filler cap and Grip. Grip is about to be replaced so I used it as a first aid spec. 25m long so I don't mind if I fail in wiring. It is 25m long so I don't mind if it fails in wiring lol. View detail
Fits: HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250 S Edition
I'm satisfied
I received the item in good condition and installed it myself... Installing the riser itself wasn't difficult, but other than a delay because I didn't know how to unplug the headlight outlet, I installed it without problems. I was confused because the clutch line was a little tight, but after pulling it left and right a few times, it seemed like there wouldn't be much of a problem... The driving position isn't perfect, but I'm very satisfied with it compared to the original, and wouldn't it be perfect if it came just 3cm closer to the body... .I guess I was greedy and hesitated on whether to install the handle riser or not, so I installed it, but I think this is an option that I absolutely have to install. I am completely satisfied. View detail
Fits: HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250 S Edition
Good goods
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI Z650RS, KAWASAKI ELIMINATOR
A regular 22.2 Handlebar Up Spacer is cheaper and more Quantitative.:SetBack.
[How is it used?
I returned the product.
Was the one you received as per Image?
subtle
Was the installation difficult?
Might be difficult for amateurs.
How was your experience with it?
None.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
As the Title says, the regular Handlebar Up Spacer looks better.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail