Please login to check coupons
Product Detail
Specification
Machined aluminum: Matte black anodized finishBolt part: Steel black zinc plated
[Position]
・Rebel1100/DCT: Approx. 30mm back / 6mm up
・Rebel250: Approx. 15mm back / 10mm up
Installation time: 0.5h
Description
●Improved position by changing the handle of the revolver to a closer one
●Easy installation with no need to change handles or cables
Improved position with handlebars in front.
For those who would like to have the handlebar a little closer to the rider, the stock handlebar can be pulled toward the rider to improve the riding position.
No cables, brake hoses, or harnesses need to be changed, and the Rebel 1100 can use the stock grip heaters without modification.
Since the overall width of the bike is also unchanged, there is no need to change the information on the bike registration.
●Easy installation with no need to change handles or cables
Improved position with handlebars in front.
For those who would like to have the handlebar a little closer to the rider, the stock handlebar can be pulled toward the rider to improve the riding position.
No cables, brake hoses, or harnesses need to be changed, and the Rebel 1100 can use the stock grip heaters without modification.
Since the overall width of the bike is also unchanged, there is no need to change the information on the bike registration.
Caution
*Use stock for upper clamps.*Rebel 1100/DCT requires the removal of the rubber bushings from the brake hose clamps because the brake hoses are taut.
*The Rebel 250/500 cannot be installed with 40B handlebars due to insufficient brake hose length.
*In some cases, brake hoses and cables may not be long enough to be installed except for the stock handlebars.
*The tilt of the meter is increased by about 10 degrees.
*Small scratches may appear on the bolts due to the manufacturing process.
*There may be changes in product specifications due to the manufacturer's reasons.