Reviews
Fits: HONDA CB400SS, HONDA CB750, HONDA CB750F, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA VTR1000SP, HONDA XR50 Motard, KAWASAKI D tracker, KAWASAKI D Tracker 125, KAWASAKI W650, KAWASAKI ZX-10R, SUZUKI DR-Z400SM, SUZUKI GSR400, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX250S Katana, SUZUKI GSX400S Katana, SUZUKI ST250 E type, SUZUKI SV1000S
Absolute safety and reliability
D Type on ADDRESSV125 (with a twist) Banjo bolt is K9 (L3=Last model V125) Using OEM, copper Crash washer is 1.5mm thick.
It works well.
Gyuin! and stop.
(I'm not going to put Brake on it and go through the slushy.)
It is made of one piece of steel and is simple to use. There is no possibility of malfunction or failure due to installation errors. Furthermore, it is less than half the price of other companies' products, so there is no other choice but to buy it.
OEMBanjo bolt is made of steel and is Material in case of a fall:It is absolutely safe because it does not crack like aluminum. The banjo part of this product is 8mm thick and the OEM brake hose is 10mm thick. (hole) The orifice position on the banjo was checked to make sure that the orifice position was aligned with the position of the K7 OEMBER bolt. The K7 OEMBE banjo bolt had the orifice positioned a little higher, with a 1mm crash washer on the bolt head side and a 1.5mm crash washer on the caliper side, and the orifice position was perfectly aligned. The bolt length is also perfectly aligned without any collision.
The Goodridge banjo bolt is made of steel, has a low head and good parenthesis, but when I went to see the actual product, I found that the OEM bolt works harder and faster with a little grip because the orifice diameter is twice as large as the ADDRESSV125 OEMB banjo bolt and the brake fluid volume is larger. The OEM brake hose is stronger and faster than the ADDRESSV125OEMBanjo bolt because it discharges more brake fluid. Furthermore, the orifice diameter of the mesh brake hose was also the same. Of course, the limit of the brake hose is the same for both the OEM brake hose and the mesh brake hose, but you can precisely adjust the brake effect according to your grip, and since the hose is not inflated by the pressure, the brake can be applied to the maximum large limit, which means that the brake effect is better.
FTire is IRC MBR740 DIX-RR with high grip. if the Brake works but the tire does not grip, it will slip. The order is to use high grip tire first, then change Hose and Pad.
Was the installation difficult?
This is a difficult category. I did a lot of research beforehand and measured the length of the ADDRESSV125 OEMHose to be 875mm, and the next setting is 850mm after the 900mm length. 900mm is definitely not pulling on the Hose, although it is a little dubby in the front cowl. We also put it through the OEM Guide and Rubber. This is the most important security component, so take your time and be careful.
How was your experience with it?
The best. Outstanding reliability. Hyper Sintered Pads, but they work so well that I thought they had been replaced by Golden Pads! Hyper Sintered Pads, but they work so well that I think they have been replaced by Golden Pads! (works fast). 。
Golden pad and high grip tires are also available.
[Was there anything that disappointed you?
No. I can't help but think that DAYTONA is a good company! I'm sure you will agree with me.
It doesn't matter if it looks tacky or not. Performance supremacy.
Very nice product, thank you.
View detail
Fits: YAMAHA VMAX , HONDA FTR223, KAWASAKI GPZ900R, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR400, YAMAHA VMAX, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA TW200E, YAMAHA MT03
Cheap but reliable.
I sometimes hear that external Stainless Steel Mesh Hose has lost its caulk, but this product is made of OEM material.:It is manufactured by NICHIRIN, TopShare of RubberBrake hose, and all products have been inspected.
It is not only reliable, but also cheaper and more cost-effective than other companies' products.
Even if you use it to replace the brake line of an older vehicle that is no longer supplied by the OEM, you can be assured of the same quality as the OEM, and you can also get the tight touch that is typical of Stainless Steel Mesh Hose.
View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB750, HONDA CB750, YAMAHA MT03, YAMAHA MT-25, HONDA MAGNA50
Inexpensive stainless steel mesh hose
[How is it used?
YamahaXJR400R (RH02J) I purchased this product for the Front brake of the
I bought this D Type 800 and 850mm from DAYTONA's compatibility chart.
Was the one you received as per Image?
Photo
At best, they are unobtrusive; at worst, they are plain-looking.
Was the installation difficult?
In the case of XJR, it is easy to install by simply removing the Wire Guide.
The brake fluid needs to be bled, but since there is no ABS, it is not particularly complicated.
How was your experience with it?
Both MASTER and Caliper are still OEM, so I can't say whether they have improved or not.
I have no complaints about Brake's Touch, so I am satisfied with it.
However, I bought it after seeing the fit, but the Left Side is longer as shown in the picture, so honestly, I think both should have been 800mm.
[Included Parts:were they on?
Brake hose only.
Naturally, Copper Washer and Brake fluid will need to be new.
[Was there anything that disappointed you?
Not particularly
【Review】
Pre-installed banjo and stainless mesh hose with good cost performance.
It is a good product for those who do not want too much custom feeling because of its few colors.
View detail
Fits: YAMAHA VMAX , HONDA FTR223, KAWASAKI GPZ900R, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR400, YAMAHA VMAX, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MAJESTY250(4HC), YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YBR250, YAMAHA YZF-R1
Used for ybr 125
I wanted to replace the normal hose on my YBR125 after 20,000 km and to improve the brake touch. There are many cheaper products available, but we chose DAYTONA because we want to use a reliable manufacturer for the brake.
Purchased Type A 850mm. The banjo bolt is NORMAL and the crush washer is Copper Washer.
After the replacement, the tightness of the brake is much better than with NORMAL, and it is easier to control the brake strength. In addition, the lever position at which the brake is effective is quite shallow. (far from Throttle) The design is not too obvious and is very pleasing. The design is not too obvious, but it is a nice touch.
View detail
Fits: YAMAHA VMAX , KAWASAKI ER-4n, KAWASAKI Z250 (2013-), KAWASAKI ZRX1200S, YAMAHA YBR250, KAWASAKI 250TR, KAWASAKI ZRX1200R, KAWASAKI ZX-12R, YAMAHA SR400, YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA VMAX, YAMAHA MT-25, HONDA CBR250R, KAWASAKI ZEPHYR400, YAMAHA YZF-R3, YAMAHA MAJESTY250(4HC), YAMAHA MT03, YAMAHA VMAX , YAMAHA TW200E
Good cost performance and durability
I have heard that the Brake hose with aluminum banjo is lightweight, but it can break at the slightest impact, so I am considering changing it.
Material:Stainless Steel is expensive, so I purchased this product, which is Steel but made of Stainless Mesh.
I purchased the shortest 550mm, but it is a little long for my Motorcycle and I wish there was a shorter Type.
One point to note is that Banjo is 8mm thick, thinner than other Manufacturers' products, and when connected to APRACING's CP2696
Banjo bolt has bottomed out.
So, I changed the Caliper side crush washer to a 3mm thicker one, and it did not bottom out, and I was able to install it without any problems.
(Crash washer on Bolt side is 2mm because the holes of Hose and Bolt are not aligned.)
From now on, I can ride with confidence in its good looks and durability.
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Good looking and cosy
Vehicle:Ninja 250 (JBK-EX250L)
HURRICANE Handlebar Up Spacer H18 (HB0668B) was installed because "800mm" I chose to use the
750mm was Just size.
According to the *Manufacturer's compatibility chart, even without Spacer (OEMSpec.) 750mm is best, so the presence or absence of this degree of spacer does not seem to affect the length of the Brake hose.
(It can be installed, but it is a little awkward because of the extra length.)
In addition, the banjo bolt has a ACTIVE Banjo bolt, Stainless Steel [GOODRIDGE] (992-03-32C) was used.
The effect on the performance of Brake is only that it seems to have become a little snappier.
I also replaced the Brake Pads (DAYTONA Golden Padχ (97134)) later on.
The Brake Pads may come first if the goal is to improve the touch feeling, since the Brake at that time was more snap-like.
(The initial input of the grip is changed by the Brake hose, and from there on, the change by the Brake Pads is Large.)
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CBR600F
Simple
Like the front brake hose, the hose was changed to DAYTONA's hose. I replaced the Edge line hose with a stainless steel mesh hose because it was very rusty.
I think DaytonaHose has a very good touch. It is simple and not flashy, but I think it is a very good product. The length lineup is 30mm longer than OEM, but I don't feel any discomfort. It took me 20 minutes to install and bleed the air. I also like the marker on the hose to check for twist. The new design is great!
View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, SUZUKI GSX250R, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA XR100MOTARD, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
DAYTONA HIGH-SPEC LINE
ITEMS ARE WELL PACKED!!! AND IT SATISFIES MY CUSTOMER THANK YOU SO MUCH!!! WILL ORDER ANOTHER SOON AND WILL RECOMMEND THIS TO MY FRIENDS HERE IN PHILIPPINES!!! View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, SUZUKI GSX250R, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA XR100MOTARD, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
DAYTONA High-Spec Line Brake Hose Type D
About quality and texture The quality was excellent It wasn't mesh or rubber, but I'm satisfied About the feeling of use It's working fine Products to buy together I recommend that you buy new bolts Difficulty of installation Installation is easy, but not easy because of brake fluid Cost performance and comparison with other products It's easier to sort than mesh About shipping and packaging The packaging is always meticulous The delivery took a week Any concerns, cautions, or advice when purchasing If you're not sure you can handle brake fluid, I think you'd better find a repair shop Brake oil is dangerous View detail
Fits: HONDA CB750, HONDA CB750, HONDA VTR1000SP, KAWASAKI D tracker, KAWASAKI D Tracker 125, KAWASAKI W650, KAWASAKI ZX-10R, SUZUKI DR-Z400SM, SUZUKI GSF1200, SUZUKI GSR250, SUZUKI GSX250S Katana, SUZUKI GSX400S Katana, SUZUKI RF400, SUZUKI ST250 E type, SUZUKI Street Magic 110, SUZUKI street magic, SUZUKI SV1000S, SUZUKI SV400, YAMAHA FZ400, YAMAHA FZ6-N
It used instead of the normal hose used for 12 years. Although it was easy to require a price and a touch, when pulled about like normal, since the hose was thin, it could not fix, but processing was required. A design and a color are touch that i
It used instead of the normal hose used for 12 years.
Although it was easy to require a price and a touch, when pulled about like normal, since the hose was thin, it could not fix, but processing was required.
A design and a color are touch that it is not showy and good.
View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB750, HONDA CB750, YAMAHA MT03, YAMAHA MT-25, HONDA MAGNA50
No assembly required
Used in Circuit.
I used to use Swage line but decided to use this one because of the hassle of assembly and the price.
The result is good. There are only a few points to tighten, which saves time and unnecessary worry.
I don't think the quality is anything special, but I can rest assured that it is made by DAYTONA.
I don't know what will happen after a few years of use, but I will keep using it.
I guess it can't be helped since it is a Large Hand Manufacturer, but I feel that DAYTONALogo should be a little more casual.
A separate banjo bolt for 8mm thickness is required. Please be careful.
View detail
Fits: YAMAHA VMAX , HONDA FTR223, KAWASAKI GPZ900R, KAWASAKI KSR-1, KAWASAKI KSR-2, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR400, YAMAHA VMAX, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MAJESTY250(4HC), YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YBR250, YAMAHA YZF-R1
cheap
The touch is as good as any other manufacturer's. It is steel, so how about rust? It looks good, not hideous, but functionally oriented. After all, it is inexpensive. View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB750, HONDA CB750, YAMAHA MT03, YAMAHA MT-25, HONDA MAGNA50
Made as if it were an OEM Product
The Banjo and Hose are made in one piece, just like an OEM Product.
I bought this hose because I wanted a hose that wouldn't give me trouble because it was an important part, but as I continued to play Custom, I found it inconvenient that the Banjo didn't come off, so I switched to another hose.
If you use the NORMAL MASTER and Caliper, you can use this product with confidence.
There are no special products for each car model, so you need to check and buy a hose that fits your motorcycle.
It's a shame that this is a good product and is often sold out. I hope they will continue to produce it.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CBR600F
Cheap, high-performance Brake hose!
This is a great price for a Stainless Steel Mesh Hose.
I've been using mine for years and it's a good product with no performance issues.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CBR600F
SRV250 enhanced with High spec line!
I bought a high spec line to strengthen the brake of SRV250.
Base is …
Condor Handle
Nisshin Separate Tank14mm
OEMCaliper Single Push 2 Pot
I chose D Type with 750mm Twist because it was lowered by Condor Handle.
OEMHose might be 800mm maybe?
The only Stainless Steel Mesh Hose that is cheap and high performance is the High spec line.
The Banjo part is made of Steel and durable.
Rust will not occur in normal use.
I recommend it because it improves the Touch of Brake.
View detail
Fits: YAMAHA MT03, YAMAHA SR400, YAMAHA SR400, YAMAHA MT-25, YAMAHA MT-03 (2015-)
Top quality brake line
Bought these for the second time. The first time was type D which is twisted type. I should have bought non twist which is type A. So before purchasing make sure you need which one suits. View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, SUZUKI GSX250R, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA XR100MOTARD, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Very nice
In terms of Japanese products, I think this product is very cheap compared to the same type of product, and it is very beautiful, and there are different length options. I can buy such a product at this price. I am personally very satisfied. I hope it will last View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, SUZUKI GSX250R, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA XR50 MOTARD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA XR100MOTARD, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Stop with confidence.
I upgraded my stock rubber brake hose to this steel braided hose. The stock hose feels spongy when stepping on the pedal. Installation was very easy. Result is instant and shows huge improvement. Ichiban View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB750, HONDA CB750, YAMAHA MT03, YAMAHA MT-25, HONDA MAGNA50
You can specify the length.
There are many different Hose, but you must first learn the Rule to think about the part number and other factors in order to be able to specify in detail. This product is pre-defined and easy to understand, so you can easily specify the length and shape you want. I always use this instead of the more cumbersome picture-less products from other companies. View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CB750, HONDA CB750, YAMAHA MT03, YAMAHA MT-25, HONDA MAGNA50
Excellent cost performance, easy to receive
Large Satisfied except that the DAYTONA letters are dumb. It's a Universal Product, and the longer ones are available on LineUp in PRO Par, so if you ask for it, you can make a half turn of the rear wheel hub like ReplicaMotorcycle in the 80's. "Kling. and I love it because I can make people sow it. View detail